|
|
 |
Brand: Jones
Jones and press coolant reservoir... |
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Brand: Frigomat
Ice cream maker robot cream cooker.
Manufacturer: Frigomat.
Model: Twin Chef 60.
Year: 2009.
Combined machine that combines the features and functions of a robot cream cooker,
maximum capacity of 12 kg per cycle.
with those of an ic... |
|
|
 |
Academic education:
Graduated in Industrial Chemistry from Universidade Mackenzie - 1989.
Specialization in Dairy by the University of Lugo Spain - 1999.
Technician in Industrial Chemistry by the Technical School Oswaldo Cruz -1979.
Sever... |
|
|
 |
Brand: ACG, Almapal, Pam
Components: Hindustan, Siemens
Vacuum ACG Pam for tablet press encapsulation.
Brand: ACG Pam.
Engine: 3.0 HP.
R.P.M: 3450.
Frequency: 60 Hz.
Components:
Hindustan Engine.
3TW42 Siemens Encapsulated Starter Magnetic Switch.... |
|
|
 |
NAW rotary press.
Ability to manufacture 200 paçocas per minute.... |
|
|
 |
Brand: Sorg
Guillotine press for cutting sheet metal.
Manufacturer: Sorg.
Model: SGH 47 / 30.... |
|
|
 |
Semi-automatic paçoca cork press.
Approximate production: up to 200 units per minute.
With two ways and output channels for feeding the packaging machine.
Hole diameter: 30 mm.
Height: adjustable.
1.5 HP engine and 1700 rpm.
Voltag... |
|
|
 |
Hydraulic press.
Manufacturer: Hidrodynamic Machines.
Type: HD 40.
Year: 1997.
Stroke: 400 mm.
Strength: 40 tons.
Maximum Pressure: 180kg / cm2.
Engine: 30 hp.... |
|
|
 |
Wafer sheet forming and assembly machine and wafer sheet press.
Cylinder press to adjust the height and thickness of the wafer sheets.
First, the block is formed with wafer sheets, and then the block is pressed by the cylinder to adjust the hei... |
|
|
 |
Table with two tubs of approximately 100 liters.
With sliding piston system to extract juices.... |
|
|
 |
Stamping set for hard candies.
Model: IMD.... |
|
|
 |
Brand: Miller
Offset printing press.
Manufacturer | Brand: Miller.
Model: TP104/6.
Format: 74 x 104 cm, 6 colors with 2 reversals (6x0 - 4x2 - 5x1).
With non-stop infrared powder drying.
High stack, input and output, 6 Bawduin refrigerators, adjustm... |
|
|
 |
Brand: MONKEY
Rubber vulcanization press 700 x 500 mm.
Manufacturer | Brand: MONKEY.
Plate dimensions: 700 mm x 500 mm.
250 mm piston.
Has 3 slots.
Year: 1990.
For manufacturing rubber parts through vulcanization.
With 5 HP WEG motor.
Volta... |
|
|
 |
Brand: Braslaer, Toshiro
- Dough mixer with compacting press.
Manufacturer | Brand: Toshiro.
Approximate capacity: 50 kg of flour.
For homogenizing sheets of pasta, lasagna, and tagliatelle, among others.
- 7-roll cylinder with a width of 500 mm.
Manufacturer ... |
|
|
 |
Brand: Claumaq
Hydraulic press for bar soaps.
Manufacturer | brand: Claumaq.
Model: 001/2022.
Approximate capacity: up to 800 units per hour.
Manufactured in: 2022.
Equipment stopped since 2023.
For pressing bar soaps.... |
|
|
 |
Brand: Fácil System
H-type rotary hydraulic press.
Manufacturer | brand: Fácil System Industria e Comercio de Máquinas e Equipamentos.
With approximate capacity: up to 60 tons.
With a rotating table with four work stations:
Control and placement of molds;
... |
|
|
 |
H-type hydraulic press with two operating fronts and independent controls.
For compaction with automatic feeding silo.
Model: PHH100T.
Dough feeding, pressing and vertical and horizontal detachers.
Approximate capacity: 100 tons.
Dough... |
|
|
 |
Brand: SFOGGIAtech
Stainless steel filter press with 20 plates 40 x 40 S.
Manufacturer / brand: SFOGGIAtech SRL.
Year: 2012.
It was only in operation for a few days and has been in storage since then.
For filtering mineral insulating oil, but it can filter ... |
|
|
 |
Brand: Fima
Extruder press for short and long pasta.
Manufacturer: Fima.
Approximate capacity: up to 150 kg / hour.... |
|
|
 |
Brand: Braibanti
Extruder press for short dough and long dough.
Manufacturer: Braibanti.
Approximate capacity: up to 250 kg / hour.... |
|
|
 |
Brand: Mebusa
Hydraulic press.
Manufacturer: Mebusa.
Model: 30 - 12 - A.
Type: ascending hydraulic press.
Bending pressure: 30 tons.
Bending length: 1200 mm.
Open height: 300 mm.
Stroke length: 100 mm.
Throat depth: 200 mm.
Machine heigh... |
|
|
 |
Brand: Clearing
Industrial plate press.
Brand: Clearing.
Capacity: 1650.
Production: 5 - 16 hits.
Table board: 300.... |
|
|
 |
Press for stamping steel sheets, bending and drawing cut.
Brand: Gutmann.
Model: P20 150.
Year: 1989.
Capacity: 150 tons.
Average production: 3,000 strokes per minute.
Engine: 15 hp.... |
|
|
 |
Exentrica press over 80 tons.... |
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
Sigma G.Mazzoni stainless steel mixer.
With control panel and automatic extrusion.
Reinforced walls.
Production 175 kg of base mass, was used to mix soaps masses, due to its strength, the equipment is reinforced, including against high quali... |
|
|
 |
Brand: Imarvil
Simple shirt tank in stainless steel and with mixer.
500 liters capacity.
Brand: Irmavil.... |
|
|
 |
Brand: Riva
Compressor rotary press tablets.
Brand Name: Riva.
Model: D-14.
Equipment imported from Argentina.
Machine in excellent condition.... |
|
|
 |
Brand: Promaler
Intermittent rotary cellofanching machine.
Brand: Promaler.
Prepared to operate fully closed cartridges.
Tape application with the following dimensions: 36 mm wide x 15 mm deep x 67 mm high.
Machine can be formatted for cigarettes, haysta... |
|
|
 |
Stainless steel tank.
1000 litre capacity.
With motor and reducer.... |
|
|
 |
Brand: Claumaq
300/500 kg production.
Mark Claumaq.
Diameter of 90 mm cannon
thread Diameter 200 mm in aluminium.... |
|
|
 |
Brand: Tirelli
Labelling machine for bottles, Cologne and perfumes.
Brand: Tirelli.
Model: Delta.
Year: 1999.
Height: 2.00 m.
Width: 1.80 meters.
Length: 2.40 metres.
Weight: approx. 300 kg.... |
|
|
 |
Brand: G.Mazzoni, Jones, KHS, Mazzoni, Mazzoni LB
Sigma mixer, calender, extrusion and soap press.
Estimated production capacity: between 900 kg / h * up to 1,000 kg / h **.
Machines for the manufacture of soap composed of:
Sigma mixer for soaps.
Brand: G.Mazzoni.
Yield: 175 kg of bas... |
|
|
 |
Components: SEW-Eurodrive
- Capacity: 2,000 L.
- Made of stainless steel.
- With complete panel:
- Siemens Logo 230 RC.
- Siemens switches.
- Organized picture.
- Inverter Sew Eurodrive Movitrac LT.
- System and pneumatic key.
- The mixer has two caps,... |
|
|
 |
Brand: Bonsucesso
- Capacity: 1500 l of mixer and 500 liters of silo approximately.
- The blade mixer is coupled to a lower outlet mezzanine, or silo of the product,
For intermediate transport and storage (silo) for threads
Carriers.
- The equipment has mo... |
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
G.Mazzoni soap extruder intermediary.
- To extrude soap and preliminarily homogenize the dough.
- With 300 mm thread and cutting system.
- Measure 2,10 in length x 1,30 in width.... |
|
|
 |
Stainless steel storage tank.
500 liters capacity.
With carbon steel support.
Output of the product from the side.
With motor and propeller shaft.... |
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
Homogenizer for soaps with 3 cylinders.
With fine pressure adjustment.... |
|
|
 |
Brand: Serpack
Components: Atos, WEG
Vertical powder wrapping machine
Brand Name: Serpack.
Model: SPK 250.
Machine with panel.
Inverter Weg CFW 8 and Weg CFW 10.
Servo driver / Servo converter / Servo converter Weg SCA 04.
With servo motor, internal thread of dosage an... |
|
|
 |
Brand: IMSB, Rodopac
Automatic Capper with 6 nozzles.
Manufacturer: IMSB.
Model: TSB 25.06
6 Nozzles.
Measures 40 mm: 1.50 mm x 1.20 mm x 2.30 mm height.
Bondone and thread plastic bottles of 850 ml.
Capacity of 150 bottles per minute.
Weight 1,100 kg.
... |
|
|
 |
Brand: Fanem
- Fanem 345 climate chamber
- Stainless steel inner chamber
- Volume of 270 liters;
- Microprocessed control;
- Temperature: 10 ° to 75 ° C;
- Internal humidity controlled between 35% and 95%;
- Internal circulation of forced air;
... |
|
|
 |
The machine is part of a line for production of SOAP g. Mazzoni.
Mat set:
1.80 m mat press input.
2.00 m mat press output.
8.00 m mat cutter output.
7.50 m mat return refining extruder.
Note: Uses for transportation of product... |
|
|
 |
Brand: Posimat
Positioner from plastic bottles.
Brand: Posimat.
Model: Master-20.
Serial: 8764-MXI.
Uses all kind of bottles either light or heavy, cylindrical, oval or asymmetrical, with short necks or even without a neck, as covers plans elements ... |
|
|
 |
Brand: Indumak
Components: Atos, Festo, Siemens, WEG
Vertical powder packer with helical dosing system
Brand: Indumak.
Model: MG 8000.
With thread, dosing system and format.
With panel.
System of vision Acts series interactive.
Inverters Weg CFW 08.
CLP Atos MPC 4004.
Servo driv... |
|
|
 |
Brand: Martinez taboada
Rinsers of vials and flasks.
Mrca: Martinez Taboada.
Makes up to 30 ml.
type Model. IFE 77.
Year. 1979.
the machine was being used all the time, is in a State of preservation as the machines of the perfume line.... |
|
|
 |
Semi automatic baler for SOAP (without mold).... |
|
|
 |
Brand: Prodismaq
- Packing machine for special products.
- Complete equipment built in stainless steel.
- It has 10 dispensing nozzles.
- The equipment was built as a special design, to pack flexible products that need support for conveyor belt, such as seru... |
|
|
 |
Conveyor screw Stainless steel
- 5 meters long.
Measures:
- Diameter: 200 mm.
- Space between fins: 120 mm.
- Shaft diameter: 100 mm.
- Engine: 7.5 hp 1715 rpm.
- With motor and reducer.... |
|
|
 |
Brand: G.Mazzoni
Caterpillar type soap cutter.
Manufacturer | Brand: G.Mazzoni.
With 19 teeth.
Approximate weight: 300 kg.... |
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
Refining mill with 3 cylinders, 600 mm wide.
Brand: G.Mazzoni.
With equipment control panel.
Approximate dimensions:
Length: 720 mm Useful: 600 mm.
Diameter: 250 mm.
Engine: 20 HP.... |
