|
|
 |
Brand: Himaco
Plastic injection molding machine for P.P.
Brand: Himaco.
Model: APTA ECO 250 WITH SERVO MOTOR.
Average production: 130,000 units per day.
Three-phase voltage 220 v.
Commanded by PLC.
Techmation.
Closing force from 250 tons to 28... |
|
|
 |
Brand: Kroma
Stainless steel jacketed mixing tank reactor.
Manufacturer | Brand: KROMA.
Approximate usable capacity: up to 1,200 liters.
Approximate capacity: 1,800 liters.
Year: 2020.
Unused equipment.
With a vertical cylindrical body construct... |
|
|
 |
Brand: Ata, Fabrima, Giusti & Cia, New Japan, Nogueira, VOMM
Breadcrumb Production Line.
Approximate capacity: 15 tons per day.
Production is prepared for 25 kg and 50 kg bagging.
Composed of:
- 2 Cookers (Turbo-Cooker).
- 3 Continuous Dryers (Turbo-Dryer).
Manufacturer: VOMM.
- 3 Cyclones... |
|
|
 |
Hydraulic press for rubber vulcanization, 500 x 500 mm.
With a 400 mm piston.... |
|
|
 |
Brand: Durma
CNC hydraulic punching machine for sheet metal.
Manufacturer | Brand: Durma.
Model: TP9.
Approximate pressure capacity: up to 22 tons.
For sheet metal thicknesses:
Carbon steel and aluminum sheets: up to 6.35 mm.
Stainless steel she... |
|
|
 |
Brand: Mebusa
Hydraulic press.
Manufacturer: Mebusa.
Model: 30 - 12 - A.
Type: ascending hydraulic press.
Bending pressure: 30 tons.
Bending length: 1200 mm.
Open height: 300 mm.
Stroke length: 100 mm.
Throat depth: 200 mm.
Machine heigh... |
|
|
 |
Machine for candy to put in the bag
Mixer with two axles
complete line of Dairy
Tube
Packinghouse to 15 Kg
3-wire machine mechanical Stretcher screens with a maximum capacity of 40 cm, 4 x 4 Carousel machine
machine to make baby socks, ... |
|
|
 |
Brand: Edwards, Ima
Large-scale freeze dryer for vaccine freeze-drying.
Manufacturer: Edwards.
Model: 400 CL.
The information below is subject to confirmation and is estimated:
Detailed Technical Specifications Model: 400 CL.
Condensation Capacity: Design... |
|
|
 |
Complete kitchen for malt production.
Composed of:
- 2-roller carbon steel malt mill.
Features:
• Approximate capacity: 700 kg/hour.
• With a 3 HP motor.
• Epoxy-painted metal structure for fixing the mill and with a bag holder for ... |
|
|
 |
Brand: Jomar
Components: Allen-Bradley
Blow molding machine for PE, PS, PP and HDPE bottles.
Manufacturer: Jomar.
Model: 85S.
Injection and blow molding.
Year of manufacture: 2010
Origin: USA.
With manual.
Standard features:
1) Fully proportional hydraulics.
2) Al... |
|
|
 |
Brand: Unistamp
Hydraulic press PHCD.
Brand: Unistamp.
Year: 2007.
Speed: 500 to 1,000 u / h.
For 60 tons.... |
|
|
 |
Hydraulic rubber press.
Brand: Perfect Union
Plate: 1000 x 1000 mm PHS.
1000 Ø500 mm
420 barrel.
Piston: 500 mm, ground and chrome treated, with special steel.
Piston stroke: 400 mm
Maximum compression power: 420 tons
Construc... |
|
|
 |
Complete line for the production of brake linings for heavy and mid-line vehicles.
It has several equipment, among them:
Two hydraulic presses for 500 tonsalas.
Two hydraulic presses for pre-molding.
Broken jet of shot E 100.
Blade mix... |
|
|
 |
Brand: Jundiaí
Press.
Brand: Jundiaí.
Model: TCI-300T F5 2B.
Year 2003.
Capacity of 300 ton.
Dimensions table: 2400 mm x 1000 mm.
Distance between table and hammer 900 mm.
With INCO 518-2C charge monitor.
Motorized hammer control, AP-19 cush... |
|
|
 |
Brand: Jundiaí
Press.
Brand: Jundiaí.
Model: TCI - 200 T.
With friction brake.
Year: 1998.
Capacity: 200 ton.
Table of 1400 mm x 1000 mm Distance between table and hammer of 750 mm.
With INCO charge monitor.
Motorized adjustment of the hamme... |
|
|
 |
Brand: Clearing
Press.
Brand Name: Clearing.
Type: Hydraulics.
Year: 1992.
Capacity: 580 Tons.
GPM .: According to approach speed.
Course .: 1600.
Regulation: 1200.
Hammer: 2240 x 960 mm (Sheet press 2740 x 1200 mm).
Table: 2740 x 1220 mm.... |
|
|
 |
Brand: Mastermac
Components: Argo Hytos, Coel, Eaton, HDA, Hydac, Hydraulic Systems, Metal Work, Tecfil, WEG, Xstart
Hydraulic press for elastomer vulcanization.
Brand: Mastermac.
Quantity: 3 units with presses, hydraulic system and accessories.
Specifications:
Models: PHTE 500/30.
Manufacturing number: 09121014.
Year: 2010.
Plateaus: 50 x 50 x... |
|
|
 |
Automatic sheet metal unwinder.
Single unwinder for non-motorized tapes.
Model SDB-1200M .
Material to be processed: 430 stainless steel.
Resistance limit: less than or equal to 400 N/mm².
Maximum tape width: 600 mm.
Roll inner di... |
|
|
 |
Complete industry company for the recovery of plastic materials such as PP, HDPE and LDPE.
It has:
1 extruder 120 mm.
With hydraulic head.
Approximate capacity: 420 kg/h.
Engine power: 125hp.
1 extruder 120 mm.
With hydraulic head.
Appr... |
|
|
 |
Brand: Onotec
40 tons hydraulic press.
Brand: Onotec Machines.
Year: 2015.
Model: PHCD-40
Power: 15 HP/1750 RPM.
Voltage: 220V.
Press Type: Hydraulic Type "C".
Frequency: 60 Hz.
Structure: ASTM-A36 steel.
Phases: Three-phase.
Table di... |
|
|
 |
Hydraulic press to make bales.
Brand: JBR equipment.
Strength: 90 tons of pressure.
With oil cooler for cooling.
With 4 pistons.
Engine: 30 hp, 220 v three-phase.
Bale pattern 18 cm wide by 18 cm high x 18 cm wide, with a length of ... |
|
|
 |
Brand: Luxor
Heated hydraulic press.
Brand: Luxor.
Heating plate dimensions: 350x300x70 mm.
Plate heating system: electric.
Cooling system: Water.
Compression power: maximum 40 tons.
Maximum span opening: 120 mm.
Voltage and frequency of the ... |
|
|
 |
Hydraulic press for the manufacture of rubber products.
Pressure capacity: 250 tons.
5 Plates with dimensions 700 x 600.
Piston with 400 mm.
Working pressure: 250 Kg / cm².... |
|
|
 |
2 thermal hydraulic presses for rubber
3 500 x 500 3 Dishes go 2 1/2 column 250 mm piston resistance heating
3 500 x 400 3 Dishes go 2 column "150 mm piston oil heating
500 mm Working Area (both)... |
|
|
 |
Brand: Vitoria
-Milling machine Brand Vitoria, with cambio, Motor and 2 heads (horizontal and vertical Machining) Splitter and dividers, and some records of milling cutter and endmill.
presses Rocker type with screw will free from 650 mm
-Type Body with fiber p... |
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Semi automatic baler for SOAP (without mold).... |
|
|
 |
Brand: G.Mazzoni, Jones, KHS, Mazzoni, Mazzoni LB
Sigma mixer, calender, extrusion and soap press.
Estimated production capacity: between 900 kg / h * up to 1,000 kg / h **.
Machines for the manufacture of soap composed of:
Sigma mixer for soaps.
Brand: G.Mazzoni.
Yield: 175 kg of bas... |
|
|
 |
Brand: Jones
Press Jones and conveyor belts... |
|
|
 |
Brand: Heidelberg
Hydraulic Press Heidel... |
|
|
 |
Brand: Nomura
Mechanical guillotine mark Nomura, cutting capacity-mild steel 55 mm, length 1200 mm cutting useful motor power 55 kw, knife length 1830 mm, weight 45 tonnes... |
|
|
 |
Brand: Poreba
Lathe.
Brand: Poreba.
Model: TCG 200 Mach.... |
|
|
 |
Brand: Giustina Farell
Diameter: 2600 mm.
Step in the movement: 2032 mm.
permissible length between centers: 10000 m
maximum weight between centers: 200 tons.
Fagor 8055 CNC: S
year: 80.
Weight: Approximately 250 tons.... |
|
|
 |
Brand: Ares Seiki
Machining center.
Brand Name: Ares Seiki.
Model: A-600.
Fanuc Command.
Courses: 600 mm x 400 mm x 600 mm.
table size: 700 mm x 410 mm/8,000 RPM-BT 40.
Magazine Exchange quickly for 24 tools.
Advances: 36/36/36 m for minute... |
|
|
 |
Set the hot and cold rolling mill for aluminum
consists of 4 (four) modules rolling and in perfect working condition with year of manufacture 2008.
big Mill with 686 x cylinders measures 1,203 small mmLaminador with 600 cylinders measures x 1,170... |
|
|
 |
Around
CNC Machine 195II year 2004 model Nardini logic
tyre, * point with k12k *
electric Tower 8 positions
pneumatic Plate diam 8 k12k autoblok of * *
MCS Command
... |
|
|
 |
Brand: ROMI
CNC lathe Galaxy 10 Romi.
Year: 2002.
Fanuc 21I command.
Chip carrier.
Pistol washing.
12 Tower positions supported by tools.
Machine working 100%.... |
|
|
 |
Brand: Nardini
Lathe.
Brand: Nardini.
Model: MS-350.
Dimensions: 1.50 m of busbar.... |
|
|
 |
01-03 ton press (green)
-01 03 ton press (green) c/bookmark
-preensa 01 of 04 ton (Brown)
-01 08 ton press (green)
-01 08 ton press (green)
-01 nylon roller machine p/cutting torch parts
-01 p/calender tracking parts and or materials
to... |
|
|
 |
Brand: Barban Vicentini
150 TON PRESS
REVERSE 180 TON PRESS
300 TON PRESS VICNETINI BARBAN OLD MODEL
... |
|
|
 |
Brand: Fabrima
Tablet blender.
Brand Name: Fabrima.
Model: M301-PP3402.
Year: 2004.... |
|
|
 |
Brand: Heller
Machining center brand/manufacturer Heller.
Available for sale 5 units.
Model: MCP H 250
Machine underwent maintenance.
-equipment Data
-Desktop:
-longitudinal x-axis Stroke (mm)-800
-longitudinal Stroke y-axis (mm)-800 ... |
|
|
 |
Bambury Cope AML 25.
Engine: 100 HP.
opening pneumatic valve.
4 mixer wings.
Automated switchboard.
In great condition.
Year: 1980.... |
|
|
 |
Brand: ROMI
CNC lathe
brand name: Romi Centur k12k * model: * 30 D
Command
year 9 Mach 2004.
With electric Tower 8 positions.... |
|
|
 |
Brand: VMA
Plaina limadora.
Brand: VMA.... |
|
|
 |
Rectify 18000 mm x 2000 mm
Measures-18000 mm x 2000 mm
height: 2000
02 Heads, a
Rotary hydraulic feeding with four engines
With wiring diagrams
... |
|
|
 |
Brand: Maho
MARK MAHO MH MODEL 600E with CNC432 COMMAND and COLOR VIDEO GRAPHIC CONNECTION 24V for 22 tools, NP 48588, IS0 40. ... |
|
|
 |
Brand: GOITI
PGA-4 model punch mark GOITI... |
|
|
 |
Tacho inox.
Capacity: 2000 l.
Tacho inox.
Capacity: 660 l.
Tacho inox.
Capacity: 200 l.... |
|
|
 |
Brand: Mazak
Horizontal lathe.
Brand: Mazak.
Model: Mazak Quick Turn Smart 350.
Year: 2015.... |
