|
|
|
| Heat exchanger with 26 boards |
|
Heat exchanger with 26 plates.
Length 0,93 m x 0,41 m width x 0,74 m height. |
|
|
|
|
|
|
|
Main suggestions:
|
|
 |
Heat exchanger with 2 stages and 17 plates
0.75 0.90 Height x length... |
|
|
 |
Heat exchanger for 2 stages with 12 plates.
Height 0.76 m x length 0.87 m x width 0.41 m.... |
|
|
 |
Stainless steel jacketed tank.
With heat exchanger and centrifugal pump.... |
|
|
 |
Brand: TecnoClima
Canning line for carbonated and non-carbonated beverages.
For 269 ml, 350 ml, 355 ml and 473 ml cans.
Composed of:
- Carbonator with tank pump and heat exchanger.
Approximate capacity: up to 3,000 liters per hour.
- Stainless steel thr... |
|
|
 |
Brand: Alfa Laval, APV, Endress Hauser, Endress+Hauser, Loma Systems, NASH, SMAR
Automated system for preserving the integrity of products with chunks.
Set of industrial equipment for food processing, specifically designed to produce items with solid chunks that do not break down during the process.
Approximate capacity: 45... |
|
|
 |
Brand: Ziemann Liess, APV, Cleaver-Brooks, Filtec, Ingersoll Rand, KHS, STEINECKER
Complete Brewery Factory.
Approximate capacity: up to 10,000 bottles/hour for 600 ml bottles.
Equipment set for malt and gritz treatment, consisting of:
- Reception, cleaning and weighing.
Manufacturer | brand: ZIEMANN LIESS (Brazil).
... |
|
|
 |
Brand: Ata, Frigomaq, Incalfer, Sondex
Components: WEG
Sondex plate heat exchanger standard with plates in stainless steel AISI-316
heat exchange station smart-heat model with sondex plate heat exchanger mounted.
knives and sharpeners sterilizer Frigomaq
spray for disinfecting hands Frigomaq
kniv... |
|
|
 |
Shell and tube condenser/hull heat exchanger.
Diameter: 350 mm.
Total length: 3000 mm.
Length without covers: 2500 mm.
56 inner tubes as per photo.
Tube inner diameter: 10 mm.
It had a juice system.... |
|
|
 |
Brand: Implantação Engmaq
Stainless steel tank with serpentine.
Brand: Implantation Engmaq.
Capacity: 35 liters.
Area: 0,30 m2.
Pressure Design: Side / Serpentine - 3/5 Bar / man.
Design temperature: Side / Serpentine - 80/80 C.
Operating pressure: Side / Se... |
|
|
 |
Brand: Tetra Pak
UHT VTIS for sterilizing dairy products.
Aseptic processing system for sterilizing heat-sensitive and low-acid products such as milk, enriched milk, cream, soy milk, formulated dairy products, ice cream mixes, dairy desserts, as well as ESL (exten... |
|
|
 |
Brand: West equipamentos
Plate heat exchanger.
Manufacturer / brand: West.
Model: West-15.
Composed of a solid stainless steel pedestal, corrugated plates, tie rods for fixing the plate bundle.
Approximate capacity: from 2,000 liters per hour to 10,000 liters per... |
|
|
 |
Brand: R.Camargo
Line for production of ice cream of pasta.
Composed by:
Producer of horizontal ice cream.
Brand: R.Camargo.
Model: PHD 80/100.
Capacity: 80 L / 100 L / h.
Tub of autonomous maturation.
Brand: R.Camargo.
Capacity: 180 L.
Hom... |
|
|
 |
Pasteurization or maturation system with 2 vats of 600 liters each.
Stainless steel tanks.
Sanitary pump for product pumping.
Plate heat exchanger in stainless steel.
Cooling tower.
Producer of ice cream.
Complete system assembled.
... |
|
|
 |
Brand: Apema, MECALOR, Sabroe
Components: WEG
Compressor for ammonia.
Manufacturer: Sabroe.
Model: CMO 16.
Working pressure: maximum 15 atm.
Engine: WEG 40 HP.
Apema condenser.
Model: SL - 30.
Capacity: 30 TR.... |
|
|
 |
Double heat exchanger.
With 48 plates being 4 x 12.
Measures 1,50 x 1,30 mm.
Plate Information:
PMTA 6 Bar.
Design temperature: 120 C.
Pressure test design: 677.8 bar.
Thermal exchange area: 1.2 m³.
Tightening of the set of mi... |
|
|
 |
Tilting mixer with conical bottom in stainless steel.
With carbon steel structure.
With heat exchanger.
It was used in the dairy food processing industry.... |
|
|
 |
Brand: Narita, VMC Máquinas
Complete line for bottling mineral water, carbonated or still drinks.
Manufacturer | Brand: VMC Máquinas.
For 500 ml bottles.*
*Can be used for up to 2 liters.
Composed of:
- Inlet air vents that leave the blower* and go to the filler.... |
|
|
 |
Brand: Tetra Pak
Indirect tubular pasteurizer sterilizer, aseptic line.
Manufacturer | Brand: Tetra Pak.
Approximate capacity: up to 9,000 liters per hour.
With THE Tetra Pak Spiraflo tubular heat exchanger.
Refurbished equipment.
Includes new componen... |
|
|
 |
Brand: Milainox
Non-carbonated beverage filling line.
Composed by:
Plate pasteurizer.
Capacity: 1000 l / h.
With skid, panel, frequency inverter.
Isothermal process tank with mixer, double spray ball.
Capacity: 1,000 L.
1000 liter capacity isoth... |
|
|
 |
Tubular heat exchanger for soda with temperature between 60 and 80 degrees, 10000 l/h flow rate... |
|
|
 |
Brand: APV
Heat exchanger c/58 brand cards with 2 entry APV ¨
measuring 25 cm width/85 cm long.... |
|
|
 |
Brand: Alfa Laval
Stainless steel heat exchanger with 60 plates.
Manufacturer | Brand: Alfa Laval.
Model: M6-MB ASE.
Volume: 26.12 liters.
Year: 2006.
Maximum pressure: 1.0 MPa.
Working pressure: 10 bar.
Maximum temperature: 95°C.
It was workin... |
|
|
 |
Screw compressor chiller.
Brand: Mycom.
Model: 160 LVD.
Capacity: water cooling approximately 30 m³ / h.
125 hp engine
Original painting, stander and equipment made by the manufacturer himself.
Heat exchanger the evaporator plate an... |
|
|
 |
Brand: OMS
Shrinkable palletizer.
Brand: WHO.
Model: FT 20.
Year: 2011.
Operating time: 3 years.
Estimated average cycle speed: 150 s / 160 s.
Maximum weight: 2,000 kg.
Dimensions of packaging:
Width: 520 mm, 1220 mm, 520 mm.
Automati... |
|
|
 |
Brand: Ksb
Cathodic electrodeposition line for inks.
With 3 ultrafiltration tanks.
Steel tank for ktl 2500 liter paint.
Current rectifier.
Heat exchanger.
10 TR chiller cooling unit.
Side line stainless steel filter.
Pvc membrane housing wi... |
Others suggested equipment for you:
|
|
 |
Brand: Eurocal, Imbrametal, Schema
Heat exchanger c/25
plates heat exchanger w/several capabilities, k12k * heat exchanger c/23 Imbrametal brand plates 100 ltrs
c/75 heat exchanger heat exchanger plates c/41 boards
32 Eurocal plates heat exchanger-Schema (m1 028) in stainless st... |
|
|
 |
Brand: Alfa Laval
Heat exchanger.
Brand Name: Alfa Laval.
Temperature: 130° C.... |
|
|
 |
Brand: Alfa Laval
Industrial heat exchanger.
Brand: Alfa Laval.
Model: P-14.
With 104 plates.
nominal capacity of 16,000 liters / hour
Depending on the product, maximum capacity of 24,000 liters / h
Temperatures between 80 ºC and 25 ºC.... |
|
|
 |
Brand: APV
2-stage heat exchanger plates 0.84 mm height 41.... |
|
|
 |
Brand: Alfa Laval
Plate heat exchanger alfa laval
type-M10-BLCY122H
10.0 Bar
... |
|
|
 |
High pressure pump, Eric Murphy's phone.
Parts in contact with product manufactured in 316 stainless steel.
2 input SMS, SMS 1.1/4 output.
80 bar safety valve.
9 KW engine.
Cast-iron shaped body coated with anti-corrosion epoxy paint.
Sta... |
|
|
 |
3-stage changer.... |
|
|
 |
Brand: Thermo Quality
STAINLESS STEEL 316 SPECIAL COLUMNS
complete set with heat exchangers * 4 k12k * 1. Column-A
Diameter of 800 m
12 m length 3 meters (skirt)
14 k12k * 2 * trays. Column-B
Diameter 1.100 m
length 16mts 4mts (skirt)
16 k12k * trays * All s... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Camargo Industrial acts exclusively as an advertising platform. All information, photos, descriptions, conditions, and equipment compliance are the sole responsibility of the advertisers, and it is up to the buyers to verify their accuracy before purchasing. Camargo Industrial does not guarantee the accuracy, completeness, legal and technical availability of the advertised equipment.
Workplace safety with machinery: The platform does not perform inspections or certifications. The suitability of equipment to standards is the responsibility of sellers and buyers.
|
 |
| |
|
