|
Used machines for sale
Buy 200 ton press Jundiaí
>> Metal
|
|
|
|
|
| 200 ton press Jundiaí |
|
Press.
Brand: Jundiaí.
Model: TCI - 200 T.
With friction brake.
Year: 1998.
Capacity: 200 ton.
Table of 1400 mm x 1000 mm Distance between table and hammer of 750 mm.
With INCO charge monitor.
Motorized adjustment of the hammer AP-19 hydraulic unlocking. |
Brand:
Jundiaí
|
|
|
|
|
|
Other similar equipment for research results
:
|
|
 |
Hydraulic press.
Manufacturer: Hidrodynamic Machines.
Type: HD 40.
Year: 1997.
Stroke: 400 mm.
Strength: 40 tons.
Maximum Pressure: 180kg / cm2.
Engine: 30 hp.... |
|
|
 |
Brand: Ulma
Components: ABB, Allen-Bradley, B&R, Becker, Bongfliglioli, Crouzet, Danfoss, Eaton, Guardmaster, Larraioz, Laumas, Lotec, Neugart, Proauto, Schmersal, Schneider, SEW, SEW-Eurodrive, Siemens, Tecnotrans
Line for packing and boxing.
Composed by:
Vertical vertical wrapping machine.
Brand: Ulma.
Model: VTI 460.
With two transverse seals and one longitudinal.
For solid or hard to handle products.
Special for bulk packaging.
Maxim... |
|
|
 |
Brand: Agilent HP, Anton Paar, Horiba, Hunter Lab, Kyoto Electronics, Leica, Merck, Mettler Toledo, Miele Professional, Millipore, Parker, Reichert, Thermo Fisher Scientific
Headspace Sampler
Manufacturer: Agilent Technologies
Model: G1888
Year: Not specified
Technical Description: Automated static headspace sampling system designed for volatile compound introduction into gas chromatographs. Features a 70-via... |
|
|
 |
Brand: Dedini
Silos for storing wheat flour.
Manufacturer: Dedini.
Approximate capacity: 100 tons / 165 m³.
6 carbon steel units with stainless steel internal coating.
Year: 2003.
Maximum internal pressure: 0.5 bar.
Equipment is in a covered and ... |
|
|
 |
Brand: Tung Yu
Double press for vulcanizing technical rubber parts.
Manufacturer | Brand: TUNG YU.
Model: TYC/V/182/S/PCD.
Capacity: 350 tons.
Approximate production capacity: up to 6 parts with a diameter of 200 mm per cycle of 2.4 minutes.
For vulc... |
|
|
 |
Brand: Pan Stone
Hydraulic vacuum press for rubber vulcanization.
Manufacturer | Brand: Pan Stone.
Model: P-V-250-3RT-X-2PCD.
Approximate capacity: 250 tons.
With vacuum chamber and electric heating.
With three sliding plates (platforms) - 3RT.
Year... |
|
|
 |
Brand: Pan Stone
Double press for vulcanizing technical rubber parts.
Manufacturer | Brand: Pan Stone.
Model: P-V-350-2RT-2PCD.
Approximate capacity: 350 tons.
Approximate productivity: up to 60 parts with a diameter of 60 mm in a 3-minute cycle.
Year:... |
|
|
 |
Brand: Pan Stone
Double press for vulcanizing technical rubber parts.
Manufacturer | Brand: Pan Stone.
Model: P/V/200/2RT/2/PCD.
Approximate capacity: 200 tons.
The equipment has a production capacity of 20 pieces of 80 x 80 mm in a 3-minute cycle.
Yea... |
|
|
 |
Brand: Dosaggio, Grupo Innovar, Luferco, Metalúrgica Mococa, SKYMSEN
Industrial factory/company for the manufacture of pet food.
Complete animal nutrition company.
Approximate capacity: 3 tons per day.
To produce natural food for dogs, cats, and pets.
With natural food ingredients in autoclaved packaging a... |
|
|
 |
Brand: Kroma
Stainless steel jacketed mixing tank reactor.
Manufacturer | Brand: KROMA.
Approximate usable capacity: up to 1,200 liters.
Approximate capacity: 1,800 liters.
Year: 2020.
Unused equipment.
With a vertical cylindrical body construct... |
|
|
 |
Brand: Fette
Rotary Tablet Press.
Manufacturer: Fette.
Model: 2090.
The data below is generic for the 2090 model and will be confirmed soon for the advertised equipment.
Press Type: Single-sided rotary press.
Pre-compression force: Maximum 100 kN (... |
|
|
 |
Brand: Ata, Fabrima, Giusti & Cia, New Japan, Nogueira, VOMM
Breadcrumb Production Line.
Approximate capacity: 15 tons per day.
Production is prepared for 25 kg and 50 kg bagging.
Composed of:
- 2 Cookers (Turbo-Cooker).
- 3 Continuous Dryers (Turbo-Dryer).
Manufacturer: VOMM.
- 3 Cyclones... |
|
|
 |
Brand: Engel
Injection molding machine for solid silicone rubber (HTV).
Manufacturer | Brand: ENGEL do Brasil Ltda.
Model: ES 600/200.
Clamping force: 200 tons.
For injection of 318 cm³ of solid silicone.
With 750 x 750 mm tables.
The distance b... |
|
|
 |
Brand: Durma
CNC hydraulic punching machine for sheet metal.
Manufacturer | Brand: Durma.
Model: TP9.
Approximate pressure capacity: up to 22 tons.
For sheet metal thicknesses:
Carbon steel and aluminum sheets: up to 6.35 mm.
Stainless steel she... |
|
|
 |
Brand: Alfa Laval, CIP, Endress Hauser, Endress+Hauser, Genova, Nordix, SAMSON, Spirax Sarco
Components: WEG
Production line system for various food products such as:
- Fruit preparations with or without pieces (pieces resistant to pumping);
- Toppings and sauces with or without pieces (pieces resistant to pumping);
- Injectable fillings for cakes ... |
|
|
 |
Brand: Cetro
Ultrasonic sealer for industrial production.
Manufacturer: Cetro.
Year: 2022.
Output power: 1200 W
Operating frequency: 20 kHz
Material: 304 stainless steel (ideal for the pharmaceutical, cosmetic, food, and medical industries).
Sea... |
|
|
 |
Brand: Jomar
Components: Allen-Bradley
Blow molding machine for PE, PS, PP and HDPE bottles.
Manufacturer: Jomar.
Model: 85S.
Injection and blow molding.
Year of manufacture: 2010
Origin: USA.
With manual.
Standard features:
1) Fully proportional hydraulics.
2) Al... |
|
|
 |
Brand: Mebusa
Hydraulic press.
Manufacturer: Mebusa.
Model: 30 - 12 - A.
Type: ascending hydraulic press.
Bending pressure: 30 tons.
Bending length: 1200 mm.
Open height: 300 mm.
Stroke length: 100 mm.
Throat depth: 200 mm.
Machine heigh... |
|
|
 |
Machine for candy to put in the bag
Mixer with two axles
complete line of Dairy
Tube
Packinghouse to 15 Kg
3-wire machine mechanical Stretcher screens with a maximum capacity of 40 cm, 4 x 4 Carousel machine
machine to make baby socks, ... |
|
|
 |
Brand: Claumaq
Machines for soap manufacturing.
The soap line was focused on meeting and outsourcing the production of soaps for hotels.
Maximum nominal production of the extrusion: 500 kg/h, depending on the size of the soap.
Production recorded for the s... |
|
|
 |
Brand: Fanem
Refrigerated laboratory centrifuge.
Brand Name: Fanem.
Model: Excelsa 4 280 R.
Working temperature: -5 ° C to 40 ° C.
Rotations in R.P.M: 3,800, 5,000, 7,000, 13,500, 14,000 (varies according to tooling).
With micro-processed control, ... |
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Brand: Edwards, Ima
Large-scale freeze dryer for vaccine freeze-drying.
Manufacturer: Edwards.
Model: 400 CL.
The information below is subject to confirmation and is estimated:
Detailed Technical Specifications Model: 400 CL.
Condensation Capacity: Design... |
|
|
 |
Services, Technical Support, Training, Installations, Renovations and Solutions in Process and Packaging Equipment (Pasteurization and UHT/Long Life).
- Maintenance and Technical Support:
With a highly qualified team, we offer services to maint... |
|
|
 |
Wafer sheet forming and assembly machine and wafer sheet press.
Cylinder press to adjust the height and thickness of the wafer sheets.
First, the block is formed with wafer sheets, and then the block is pressed by the cylinder to adjust the hei... |
Others suggested equipment for you:
|
|
 |
Brand: G.Mazzoni, Jones, KHS, Mazzoni, Mazzoni LB
Sigma mixer, calender, extrusion and soap press.
Estimated production capacity: between 900 kg / h * up to 1,000 kg / h **.
Machines for the manufacture of soap composed of:
Sigma mixer for soaps.
Brand: G.Mazzoni.
Yield: 175 kg of bas... |
|
|
 |
Brand: Jones
Press Jones and conveyor belts... |
|
|
 |
Semi automatic baler for SOAP (without mold).... |
|
|
 |
2 thermal hydraulic presses for rubber
3 500 x 500 3 Dishes go 2 1/2 column 250 mm piston resistance heating
3 500 x 400 3 Dishes go 2 column "150 mm piston oil heating
500 mm Working Area (both)... |
|
|
 |
Installers of air conditioning/production of ducts.
Production: bending and performs the functions with plates up to 1.5 mm.
year: 2014.
Model: Triplex (TDC flange, hip and clip).
In great condition used only 30 days of use for calibration.
... |
|
|
 |
Brand: Claumaq, Conserli, Lobopack
SOAP-making line composed by:
-stainless steel Mixer dust.
Brand Name: Conserli.
Model: MP 200.
Year: 2006.
Capacity: 200 kg.
Motor 1.5 HP.
1.50 m x 1.00 m x 1.60 time.
-
SOAP cutter Has 21 teeth, this in perfect operating condi... |
|
|
 |
Brand: Fabrima
Tablet blender.
Brand Name: Fabrima.
Model: M301-PP3402.
Year: 2004.... |
|
|
 |
Brand: Nardini
Lathe.
Brand: Nardini.
Model: NDT-650 Nodus.
Dimensions: 2.90 m of bus.... |
|
|
 |
Around
CNC Machine 195II year 2004 model Nardini logic
tyre, * point with k12k *
electric Tower 8 positions
pneumatic Plate diam 8 k12k autoblok of * *
MCS Command
... |
|
|
 |
Set the hot and cold rolling mill for aluminum
consists of 4 (four) modules rolling and in perfect working condition with year of manufacture 2008.
big Mill with 686 x cylinders measures 1,203 small mmLaminador with 600 cylinders measures x 1,170... |
|
|
 |
Brand: Heller
Machining center brand/manufacturer Heller.
Available for sale 5 units.
Model: MCP H 250
Machine underwent maintenance.
-equipment Data
-Desktop:
-longitudinal x-axis Stroke (mm)-800
-longitudinal Stroke y-axis (mm)-800 ... |
|
|
 |
Brand: ROMI
Components: Siemens
Machine: CENTUR 50 d
Manufacturer: ROMI
command: SIEMENS
main Motor: 33.6 KW
power: 50 KVA
year of manufacture: 2009
Home tree axis (mm): 135
RPM (2 tracks): 1 ~ 258/1 ~ 1048
Diameter on the bus: 700
course in (X/Z): 520/3020
fast... |
|
|
 |
Press to manufacture peanut butter cups stopper, capacity 140 pieces/minute
... |
|
|
 |
Brand: OKUMA
CNC lathe.
Mark Okuma.
Model LB 15.
Year 1990.
Missing controller.... |
|
|
 |
Machine for production of steel wool.... |
|
|
 |
Brand: ROMI
Components: Siemens
Machine: Discovery 560
Manufacturer: ROMI
command: SIEMENS
main Motor: 9.3 KW
power: * k12k 20KVA * year of manufacture: 2005
tree Cone: ISO 40
RPM: 7500
course in "Z": 508
fast forward (X/Y/Z): 30 m/min
courses (X/Y/Z): 560 X 406 X... |
|
|
 |
Brand: Astembor
Components: Atos
Presses for Vulcanizing
working pressure bar 120
500 x 500 mm Plateau
Go to gap between plateaus 110 mm
Operation on both sides with aperture of the array table
Programming manual from time and degaseification via CLP-Acts... |
|
|
 |
|
|
|
 |
Press with 14 holes for paçoca.... |
|
|
 |
Swing oil packaging, unused 2010 ... |
|
|
 |
Brand: VMA
Plaina limadora.
Brand: VMA.... |
|
|
 |
Brand: ROMI
CNC lathe Romi Centur 30 D Multiplic.
Year: 2007.
Control: Fanuc.
Electric Tower 8 positions.
Among tips: 1,000 mm.
Against pneumatic point.... |
|
|
 |
Tacho inox.
Capacity: 2000 l.
Tacho inox.
Capacity: 660 l.
Tacho inox.
Capacity: 200 l.... |
|
|
 |
Brand: Andritz
Press filter.
Brand: Andritz.
The whole set for sale for an unbelievable price, the set comprises:
- Frame (frame) 800/60.
- Drawing pressure 8 bar.
- Locking system 264MPA-E, single acting hydraulic cylinder with return
by spring and... |
|
|
 |
Brand: Mazak
Horizontal lathe.
Brand: Mazak.
Model: Mazak Quick Turn Smart 350.
Year: 2015.... |
|
