|
|
|
| Plastic extruder granulation line |
|
Granulation line extruder.
- Extruder with screw conveyor.
Thread: 90 mm L/D 31.
Engine: 50 hp.
- Water bathtub: 5 meters.
- 3 hp water pump.
- Granulator.
Manufacturer: Sagec.
Model: 300.
- 20 hp mixing agglutinator.
Approximate capacity*: from 140 to 180 kg / h.
*depending on the product. |
Brand:
Sagec
|
|
|
|
|
|
Other similar equipment for research results
:
|
|
 |
Brand: CFR, Domino, Feul Pack
Complete line for manufacturing soap from noodles, composed of:
Sigma mixer for soap noodle mass, installed on a platform with automation.
Feeding screw for homogenizing mill.
Homogenizing mill cylinder for soap with 0.5 hp.
Manufacturer:... |
|
|
 |
Brand: Divamaq, Euromax, Kroma, LANZHOU LIMAC, Mazbra Mazzoni, Mazbra Tech
Soap Making Line.
Approximate capacity: up to 3600 soaps per hour.
Line composed of:
- Stainless steel mixing tank.
Manufacturer | Brand: Kroma.
Approximate capacity: 1100 liters.
Year: 2019.
Capacity: 1100 liters.
Total capac... |
|
|
 |
Brand: Reifenhäuser
Extruder for PP, PET, and PET plastic granulators.
Manufacturer: REIFENHAUSER.
Year: 1984.
With a 250 HP motor.
With a control panel with frequency inverters.
Production: 1,200 kg per hour.
With a Primotécnica brand shredder.... |
|
|
 |
Line comes with:
Mills.
90 mm extruder.
Automatic feeder.
Heater.
3 m bathtubs.
Roll granulator.
Cooling tower.... |
|
|
 |
Industrial technician with experience in packaging machines, mining, ball mill, hammer mill, disintegrators, vibrating screens, conveyors, elevators threads of mugs, cells, classifiers, cyclones, filters kitchen candy caramels, mats, coolers, mixers ... |
|
|
 |
Brand: Trane
Industrial chilled water bank chiller 650 TR with water condensation.
Manufacturer | Brand: Trane.
Model: CVGF650.
Refrigerant gas: HFC-134a.
Lubricating oil: Trane Oil 48.
Weight: 10,900 kg.
Year: 2005.
Approximate dimensions:
... |
|
|
 |
Complete industry for manufacture of thermoplastic polymers, resulting in acrylic beads made by injection moulding/extrusion.
The industry has excellent automated production line, allowing it to be produced 400 tons per month of granular acrylic,... |
|
|
 |
Complete industry company for the recovery of plastic materials such as PP, HDPE and LDPE.
It has:
1 extruder 120 mm.
With hydraulic head.
Approximate capacity: 420 kg/h.
Engine power: 125hp.
1 extruder 120 mm.
With hydraulic head.
Appr... |
|
|
 |
Brand: PRB
Plastic thread extruder, complete line.
Brand: PRB.
Model: 60S-75.
Year: 2014.
Self concentrating head.
Trough.
Easel with automated tacho generator.
For cables from 1 mm up to 50 mm.
PP 2x1 mm to 4 x 6 mm.
With commands.
... |
|
|
 |
Low density PE plastic extruder.
Production: 60 kg/h.
Density with 60mm diameter thread with die
Cannon 1 (one)
35HP geared main motor 1 (one)
Main panel with 5 (five zones) temperature controllers 1 (one)
Panel with 2 frequency i... |
|
|
 |
Brand: Miotto
Industrial plastic extruder.
Brand: Miotto.
Thread diameter: 110 mm.
Capacity: 450 kg / h.
Power: 125 W.
With 4 meters of cannon.
With shredder vacuum pump.
With feeder.
Full panel.
With digital controllers.
Relay solid ... |
|
|
 |
Brand: Battenfeld
Extruder with double thread.
Brand Name: Battenfeld.
For PVC extrusion.
Production: 400 kg / h.
Voltage: 440 V.... |
|
|
 |
Brand: Multi-União
Components: Cestari
Plastics extruder.
Brand: Multi União.
Model: MU / 100.
Production: 500 kg per hour.
Product / process:
Extruder machine processes washed and ground recycled material into granules for processing in a blowing machine.
Year: 2015.
W... |
|
|
 |
Brand: Miotto
Granuladeira extruder for sale.
Brand: Miotto.
Capacity: Approximately 350 Kg/h
Monorosca semi new.
All new Panel.
Dry sanding.... |
|
|
 |
25 mm lab extruder, extrusion with degaseification of 120 mm and 80 mm with compressors for aumentoar production, vibratorias sieves in stainless steel, stainless steel, tamboreador dryers for mill knives, heated press for testing, Ribbon mixer Blade... |
|
|
 |
Brand: Battenfeld Pugliese
Components: Cestari
Battenfeld Blower Pugliese.
Function: production of bottles.
Used for: manufacture of detergent bottles.
Model: BPS-2.
Year of manufacture: 1996.
Capacity: 1,000 bottles per hour.
Voltage: 220 Vac/60 hz/135.
With 3 cavities moul... |
|
|
 |
Line for recycling and manufacturing of recyclable plastic bags.
Complete Great product for those in the field of recycled bags.
Overhauled machines, factory operating with responsible Production Engineer and maintenance control.
There is th... |
|
|
 |
Brand: Jianda Machinery Co
Line for extrusion of plastic films, PP, PP and PS.
Brand: Jianda Machinery Co.
Model: JDSP - 105.
Production: 120 kg / h.
Year: 2007.
Composed of an extruder with automatic feeding, a calender, a coiler and an electric control board.
... |
|
|
 |
Brand: LITAI
Automatic machine for manufacturing plastic cups.
Brand: Litai.
With little use time.
With extruder and thermoforming system for plastic cups.... |
|
|
 |
Brand: Borgmar, Mecanoplast
Complete extruder for emulsion resin for production of plastics into synthetic PVC.
technical details:
01 mono 120 mm screw Extruder, Borgmar brand
120 mm thread, 75 HP motor, resistors made in stainless steel for heating the plate, base made o... |
|
|
 |
Complete line for manufacturing plastic bags and sacks.
Produces plastic film (bags and sacks).
Extruder: Thread 65 MM.
Matrix 165 MM.
Main engine 20 hp.
Whole in the heater inverter in the supply, new blower in the inverter.
Panel ... |
|
|
 |
Brand: Braibanti, Brapenta
Drying system BGM spaghetti with 12Hp through suction and ventilation. The equipment was developed for extrusion of thermoplastics with a capacity of up to 500 kg/h
brapenta * k12k metal separator * metal separator FOREMOST
powder separator sid... |
Others suggested equipment for you:
|
|
 |
Brand: Hebleimar
Extruder for cereal dough, sweets and consistent product.
- Brand: Hebleimar;
- Model: HEX - 400.
- Material: Stainless steel.
- Voltage: 220 V Three-phase.
- Components: 1 engine of 3.7 KW of power.
- General characteristics: It ha... |
|
|
 |
Brand: Embrapac
Brand Name: Embrapac.
Model: MPF TP.
little bags with feeding mat forming.
The pull system is made by hand with suitable rubber not to mark the packaging. The correctness of the Court is automatic, the size of the bag, is performed by photo... |
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
- Vacuum duplex extruder with two chambers and G. Mazzoni heated head.
- Maximum approximate capacity of 1000 kg / hour (1,000 soaps / hour of 90 grams
In constant activity).
- With two stages, vacuum chamber, the bottom part is compacted a... |
|
|
 |
Brand: Exteec
Components: Cestari, WEG
Eteec Extruder.
Model: EX-500.
Year: 2011.
Manufactured in stainless steel.
Extrusion shirt modulated.
Production: 500 Kg/h
Size:
Length: 500 mm.
Width: 400 mm.
Height: 1200 mm.... |
|
|
 |
Brand: Miotto
Brand mixer Miotto.
Mixture composed of rigid PVC or flexible capacity 200 kg/hour.
-30 HP Engine.... |
|
|
 |
Brand: Claumaq
300/500 kg production.
Mark Claumaq.
Diameter of 90 mm cannon
thread Diameter 200 mm in aluminium.... |
|
|
 |
Brand: Posimat
- Bottle positioning machine.
- Brand: Posimat.
- Model: Master 20.... |
|
|
 |
Brand: Miotto
Miotto stainless steel cooler.
30 kg Capacity.
Cools the temperature up to 60° c.... |
|
|
 |
Brand: Posimat
Positioner from plastic bottles.
Brand: Posimat.
Model: Master-20.
Serial: 8764-MXI.
Uses all kind of bottles either light or heavy, cylindrical, oval or asymmetrical, with short necks or even without a neck, as covers plans elements ... |
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
Duplex Extruder... |
|
|
 |
Brand: G.Mazzoni, Jones, KHS, Mazzoni, Mazzoni LB
Sigma mixer, calender, extrusion and soap press.
Estimated production capacity: between 900 kg / h * up to 1,000 kg / h **.
Machines for the manufacture of soap composed of:
Sigma mixer for soaps.
Brand: G.Mazzoni.
Yield: 175 kg of bas... |
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
G.Mazzoni soap extruder intermediary.
- To extrude soap and preliminarily homogenize the dough.
- With 300 mm thread and cutting system.
- Measure 2,10 in length x 1,30 in width.... |
|
|
 |
Brand: Manesty
Granulator gum.
Brand: Manesty.... |
|
|
 |
Equipment used for product development.
Are the low production capacity with this avoids high costs of product developments.
Its capacity is 60 to 90 kg/h.
Has automated systems for control of process variables (temperature, pressure, rotation ... |
|
|
 |
Injection.... |
|
|
 |
Brand: Braibanti
1 extruder Machines Braibanti brand 150 kgs for pasta, long pasta screw type and others, including mass of snacks.
Tag: Braibanti main applications:
pasta factory
Snacks
factory
... |
|
|
 |
Pasta extruders for bullet and lollipop.
Working in conjunction with rotate staff.... |
|
|
 |
Brand: Braibanti
Extruder Braibanti brand.
production of approximately 250 kg per hour.
for pasta, rations, among others.... |
|
|
 |
Brand: Baker Perkins
Machine tools/Extruder for Fondant k12k Baker * mark * Perkins * * approximate Production k12k. 500 kh per day.... |
|
|
 |
Brand: Hansella
Equipment necessary for the production of candies and lollipops.
Pasta extruders for bullet and lollipop.
Working in conjunction with cute bat.... |
|
|
 |
Micronizador of 400 kg per hour for PE and PP new micronization.
National technical assistance.... |
|
|
 |
Table with two tubs of approximately 100 liters.
With sliding piston system to extract juices.... |
|
|
 |
Brand: Claumaq, Conserli, Lobopack
SOAP-making line composed by:
-stainless steel Mixer dust.
Brand Name: Conserli.
Model: MP 200.
Year: 2006.
Capacity: 200 kg.
Motor 1.5 HP.
1.50 m x 1.00 m x 1.60 time.
-
SOAP cutter Has 21 teeth, this in perfect operating condi... |
|
|
 |
Complete line of spaghetti consisting of:
-extruder.
-automatic Dryer with complete rods.
-mixers.
-Mill to grind the leftover spaghetti to return.
-2 automatic packaging machines 500 g and 200 g
-Baler.
-boiler.
Production capacity... |
|
|
 |
Cap molds with side glasses.
We are putting on sale the molds the brand Zé da Graça, containing as main product, side glasses plastic cap (where one can consume the liquid contained in them through straws).
-Cap molding.
Plastic injection mou... |
|
