|
|
 |
Brand: MONKEY
Rubber vulcanization press 700 x 500 mm.
Manufacturer | Brand: MONKEY.
Plate dimensions: 700 mm x 500 mm.
250 mm piston.
Has 3 slots.
Year: 1990.
For manufacturing rubber parts through vulcanization.
With 5 HP WEG motor.
Volta... |
|
|
 |
H-type hydraulic press with two operating fronts and independent controls.
For compaction with automatic feeding silo.
Model: PHH100T.
Dough feeding, pressing and vertical and horizontal detachers.
Approximate capacity: 100 tons.
Dough... |
|
|
 |
Brand: Kroma
Stainless steel jacketed mixing tank reactor.
Manufacturer | Brand: KROMA.
Approximate usable capacity: up to 1,200 liters.
Approximate capacity: 1,800 liters.
Year: 2020.
Unused equipment.
With a vertical cylindrical body construct... |
|
|
 |
Brand: Scania
Stationary diesel engine with flame retardant pump.
Approximate capacity: 308 HP.
Manufacturer/brand: Scania.
Year of manufacture: no information.
Type: SM - 202 - 500.
Rotation: 1800 rpm.
2 units available.
Basically, the pump h... |
|
|
 |
Brand: Edwards, Ima
Large-scale freeze dryer for vaccine freeze-drying.
Manufacturer: Edwards.
Model: 400 CL.
The information below is subject to confirmation and is estimated:
Detailed Technical Specifications Model: 400 CL.
Condensation Capacity: Design... |
|
|
 |
Brand: Bomax
Filter press with polypropylene chamber plates.
Manufacturer/Brand: Bomax.
Model: 20/30.
Number of plates: 20.
Maximum number of plates allowed: 30.
Intended for solid-liquid separation (solids filtration) through the forced passage of... |
|
|
 |
Brand: Metaltec
Polyurethane injection molding machine for the manufacture of diamond cables.
Brand: Metaltec.
Vertical hydraulic closure, guided by columns, horizontal injection through motor and hydraulic cylinders.
Security system comprising: automatic m... |
|
|
 |
Brand: Pan Stone
Hydraulic vacuum press for rubber vulcanization.
Manufacturer | Brand: Pan Stone.
Model: P-V-250-3RT-X-2PCD.
Approximate capacity: 250 tons.
With vacuum chamber and electric heating.
With three sliding plates (platforms) - 3RT.
Year... |
|
|
 |
Brand: Ata, Fabrima, Giusti & Cia, New Japan, Nogueira, VOMM
Breadcrumb Production Line.
Approximate capacity: 15 tons per day.
Production is prepared for 25 kg and 50 kg bagging.
Composed of:
- 2 Cookers (Turbo-Cooker).
- 3 Continuous Dryers (Turbo-Dryer).
Manufacturer: VOMM.
- 3 Cyclones... |
|
|
 |
Hydraulic press for rubber vulcanization, 500 x 500 mm.
With a 400 mm piston.... |
|
|
 |
Components: ABB, Siemens
Industrial line for production of soft capsules (Softgel) used in pharmaceutical, nutraceutical, cosmetic, veterinary and food industries.
Equipment designed for encapsulation of liquids, vitamins, dietary supplements, nutraceutical oils, natural ... |
|
|
 |
Brand: Precisão Inox
Hydraulic sausage stuffer with 2 nozzles, made of stainless steel, for meat processing plants.
Manufacturer | Brand: Precisão Inox.
Approximate capacity: 80 liters.
Year: 2019.... |
|
|
 |
Complete kitchen for malt production.
Composed of:
- 2-roller carbon steel malt mill.
Features:
• Approximate capacity: 700 kg/hour.
• With a 3 HP motor.
• Epoxy-painted metal structure for fixing the mill and with a bag holder for ... |
|
|
 |
Brand: Durma
CNC hydraulic punching machine for sheet metal.
Manufacturer | Brand: Durma.
Model: TP9.
Approximate pressure capacity: up to 22 tons.
For sheet metal thicknesses:
Carbon steel and aluminum sheets: up to 6.35 mm.
Stainless steel she... |
|
|
 |
Brand: FBR ELPO
Automatic aseptic filling machine.
Manufacturer | Brand: FBR ELPO. (Italy)
Model: RIEMPITRICE ASETTICA.
Type: ASI 1000/2.
Approximate productivity: 6,000 liters per hour.
Year of manufacture: 2001.
Intermittent operation: 15 years.
... |
|
|
 |
Brand: Farex
Hydraulic pipe bending machine with 3 axes and electronic monitoring by CNC.
Manufacturer: Farex.
Model: CTA 2002 5 CNC.
Year: 2015.
Pipe bending machine with 3 electronically monitored axes. Equipped with a CNC control system (Computeriz... |
|
|
 |
Brand: Fácil System
H-type rotary hydraulic press.
Manufacturer | brand: Fácil System Industria e Comercio de Máquinas e Equipamentos.
With approximate capacity: up to 60 tons.
With a rotating table with four work stations:
Control and placement of molds;
... |
|
|
 |
Brand: Jomar
Components: Allen-Bradley
Blow molding machine for PE, PS, PP and HDPE bottles.
Manufacturer: Jomar.
Model: 85S.
Injection and blow molding.
Year of manufacture: 2010
Origin: USA.
With manual.
Standard features:
1) Fully proportional hydraulics.
2) Al... |
|
|
 |
Machine for candy to put in the bag
Mixer with two axles
complete line of Dairy
Tube
Packinghouse to 15 Kg
3-wire machine mechanical Stretcher screens with a maximum capacity of 40 cm, 4 x 4 Carousel machine
machine to make baby socks, ... |
|
|
 |
Brand: Himaco
Plastic injection molding machine for P.P.
Brand: Himaco.
Model: APTA ECO 250 WITH SERVO MOTOR.
Average production: 130,000 units per day.
Three-phase voltage 220 v.
Commanded by PLC.
Techmation.
Closing force from 250 tons to 28... |
|
|
 |
Brand: Mastermac
Components: Argo Hytos, Coel, Eaton, HDA, Hydac, Hydraulic Systems, Metal Work, Tecfil, WEG, Xstart
Hydraulic press for elastomer vulcanization.
Brand: Mastermac.
Quantity: 3 units with presses, hydraulic system and accessories.
Specifications:
Models: PHTE 500/30.
Manufacturing number: 09121014.
Year: 2010.
Plateaus: 50 x 50 x... |
|
|
 |
Brand: Consultec PA, Ksb, Netzsch, ProMinent
Components: WEG
Dissolved Air Flotation (DAF) System.
Wastewater Treatment Plant.
Manufacturer: Consultec PA - Environmental Protection Technology.
Model: FAD C-30 FQ.
Approximate flotation capacity: 30 m³/h.
Composed of:
- Tubular hydraulic floccu... |
|
|
 |
Automatic sheet metal unwinder.
Single unwinder for non-motorized tapes.
Model SDB-1200M .
Material to be processed: 430 stainless steel.
Resistance limit: less than or equal to 400 N/mm².
Maximum tape width: 600 mm.
Roll inner di... |
|
|
 |
Hydraulic press for the manufacture of rubber products.
Pressure capacity: 250 tons.
5 Plates with dimensions 700 x 600.
Piston with 400 mm.
Working pressure: 250 Kg / cm².... |
|
|
 |
2 thermal hydraulic presses for rubber
3 500 x 500 3 Dishes go 2 1/2 column 250 mm piston resistance heating
3 500 x 400 3 Dishes go 2 column "150 mm piston oil heating
500 mm Working Area (both)... |
|
|
 |
Semi automatic baler for SOAP (without mold).... |
|
|
 |
Brand: G.Mazzoni, Jones, KHS, Mazzoni, Mazzoni LB
Sigma mixer, calender, extrusion and soap press.
Estimated production capacity: between 900 kg / h * up to 1,000 kg / h **.
Machines for the manufacture of soap composed of:
Sigma mixer for soaps.
Brand: G.Mazzoni.
Yield: 175 kg of bas... |
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Brand: Jones
Press Jones and conveyor belts... |
|
|
 |
Brand: Giustina Farell
Diameter: 2600 mm.
Step in the movement: 2032 mm.
permissible length between centers: 10000 m
maximum weight between centers: 200 tons.
Fagor 8055 CNC: S
year: 80.
Weight: Approximately 250 tons.... |
|
|
 |
Brand: ROMI
Components: Siemens
Machine: Discovery 560
Manufacturer: ROMI
command: SIEMENS
main Motor: 9.3 KW
power: * k12k 20KVA * year of manufacture: 2005
tree Cone: ISO 40
RPM: 7500
course in "Z": 508
fast forward (X/Y/Z): 30 m/min
courses (X/Y/Z): 560 X 406 X... |
|
|
 |
Brand: Clearing
Press.
Brand Name: Clearing.
Type: Hydraulics.
Year: 1992.
Capacity: 580 Tons.
GPM .: According to approach speed.
Course .: 1600.
Regulation: 1200.
Hammer: 2240 x 960 mm (Sheet press 2740 x 1200 mm).
Table: 2740 x 1220 mm.... |
|
|
 |
Brand: Nardini
Lathe.
Brand: Nardini.
Model: MS-350.
Dimensions: 1.50 m of busbar.... |
|
|
 |
Brand: VMA
Plaina limadora.
Brand: VMA.... |
|
|
 |
Brand: ROMI
CNC lathe Multiplic 35 S.
Brand: ROMI.... |
|
|
 |
Brand: Fabrima
Tablet blender.
Brand Name: Fabrima.
Model: M301-PP3402.
Year: 2004.... |
|
|
 |
Brand: French Oil Mill Machinery, Imapre
02 large Presses with capacity of 750 tonnes (brand name: THE FRENCH OIL MILL MACHINERY co.)
04 small Presses with a capacity of 350 tonnes. (tag: IMAPRE)
fully automated Greenhouse
02
Retificas for wheel... |
|
|
 |
Brand: Claumaq, Conserli, Lobopack
SOAP-making line composed by:
-stainless steel Mixer dust.
Brand Name: Conserli.
Model: MP 200.
Year: 2006.
Capacity: 200 kg.
Motor 1.5 HP.
1.50 m x 1.00 m x 1.60 time.
-
SOAP cutter Has 21 teeth, this in perfect operating condi... |
|
|
 |
Press with 14 holes for paçoca.... |
|
|
 |
Brand: Barban Vicentini
150 TON PRESS
REVERSE 180 TON PRESS
300 TON PRESS VICNETINI BARBAN OLD MODEL
... |
|
|
 |
Brand: ROMI
Components: Siemens
Machine: CENTUR 50 d
Manufacturer: ROMI
command: SIEMENS
main Motor: 33.6 KW
power: 50 KVA
year of manufacture: 2009
Home tree axis (mm): 135
RPM (2 tracks): 1 ~ 258/1 ~ 1048
Diameter on the bus: 700
course in (X/Z): 520/3020
fast... |
|
|
 |
Installers of air conditioning/production of ducts.
Production: bending and performs the functions with plates up to 1.5 mm.
year: 2014.
Model: Triplex (TDC flange, hip and clip).
In great condition used only 30 days of use for calibration.
... |
|
|
 |
Brand: Poreba
Torno.
Brand: Poreba.... |
|
|
 |
Brand: ROMI
CNC lathe Romi Centur 30 D Multiplic.
Year: 2007.
Control: Fanuc.
Electric Tower 8 positions.
Among tips: 1,000 mm.
Against pneumatic point.... |
|
|
 |
Brand: Stankoimport
About Paral·lel the 3 guide stankoimport (kramatorsk) 1a665
year: 1984
height: 850 mm point
distance between centers: 16000 mm
max on bench: 1600 mm
max in motion: 1250 mm
pallet width: 1850 mm
flow between the tips: 40 ton
spindle mo... |
|
|
 |
Brand: Nomura
Mechanical guillotine mark Nomura, cutting capacity-mild steel 55 mm, length 1200 mm cutting useful motor power 55 kw, knife length 1830 mm, weight 45 tonnes... |
|
|
 |
Brand: Vitoria
-Milling machine Brand Vitoria, with cambio, Motor and 2 heads (horizontal and vertical Machining) Splitter and dividers, and some records of milling cutter and endmill.
presses Rocker type with screw will free from 650 mm
-Type Body with fiber p... |
|
|
 |
Rectify 18000 mm x 2000 mm
Measures-18000 mm x 2000 mm
height: 2000
02 Heads, a
Rotary hydraulic feeding with four engines
With wiring diagrams
... |
|
|
 |
Around
CNC Machine 195II year 2004 model Nardini logic
tyre, * point with k12k *
electric Tower 8 positions
pneumatic Plate diam 8 k12k autoblok of * *
MCS Command
... |
|
|
 |
Brand: GOITI
PGA-4 model punch mark GOITI... |
