|
Used machines for sale
Universal milling machine Sumore
>> Metal
|
|
|
|
|
| Universal milling machine Sumore |
|
Universal milling machine.
Brand: Sumore.
Year: 2015.
Precision milling machine.
It was used for maintenance of rotating equipment. |
Brand:
Sumore
|
|
|
|
|
|
Main suggestions:
|
|
 |
Brand: Fritsch
Universal mill for R&D development laboratory stainless steel 316 L or small productions.
Manufacturer brand: Fritsch.
Model: pulverisette 19 L.
Year of manufacture: 2021.
Model specification series: 19.4060/00003.
R.P.M according to m... |
|
|
 |
Components: Transmaq, WEG
Internal stainless steel universal extruder.
With electric heating on the front.
Approximate diameter: 130 mm.
Electric motor.
Brand: WG.
With 5.0 hp.
Voltage: 220V / 380V.
Year: 2012.
Reducer.
Brand: Transmaq.
Model: TR... |
|
|
 |
Brand: Duyvis Wiener Brazil
Universal chocolate refining ladle.
Manufacturer/brand: Duyvis Wiener Brazil.
Capacity: 50 kg per batch.
Mixing refining ladle.
6 months of use.... |
|
|
 |
Brand: Mallosa
Universal Chocolate Shell
Capacity: 500 kg.
Manufacturer/Brand: Mallosa.
Motor: 25 HP.
Three-phase voltage: 220/380 V.
Made in Spain.... |
|
|
 |
Brand: Netzsch
Universal mill with pin rotor.
Brand: Netzsch.
Model: Condux CUM 300.
Estimated production: 300 kg / h.
Adjustment of the final granulometry made by varying the speed of rotation of the moving disk.
Dimensions:
Width: 1.00 m.
Hei... |
|
|
 |
Brand: TOKYOKOKI SEIZOSHO
Automatic universal equipment for tensile, bending, compression and other tests.
Load capacity: 30 tons.
Manufacturer | brand: TOKYOKOKI SEIZOSHO (JAPAN).
Equipment prepared for installation of load cells and digital test acquisition and man... |
|
|
 |
Brand: Duyvis Wiener Brazil
Mixer refiner shell for chocolate.
Manufacturer/brand: Duyvis Wiener Brazil.
Approximate capacity: up to 50 kg per beat.
With 6 months of use.... |
|
|
 |
Brand: Lloveras
Universal shell / refiner Lloveras.
Model: L-3000.
Year: 1979.
Used by Kopenhagen.
Production capacity of a 22 to 25 micron commercial chocolate is 3,000 kg in 24 hours, with a maximum of 50% sugar crystals.
To produce a 25 to 30 micro... |
|
|
 |
Brand: Baoyuda
BAOYUDA POWDERED SEASONING AND CONDIMENT PRODUCTION LINE
Baoyuda (China) powdered seasoning and condiment production line.
Comprising the following equipment:
Stainless steel universal mill with a capacity of up to 30 kg/hour,
Baoyuda HD-... |
|
|
 |
Brand: Tigre
Universal stainless steel hammer mill.
Manufacturer: Tiger.
Model: ML 20/5.
With filter and ventilation system.
Engine: 2 CV / rotation 800 RPM.
Approximate dimensions:
Height: 2.0 m.
Width: 800 mm.
Length: 1.0 m.
Mill Diam... |
|
|
 |
Brand: Sollich
- Decoration system of chocolates.
- Machine for sweets, biscuits, chocolates, cookies, wafer.
- Mark Sollich, Germany.
- Universal decoration system.
- Model SDS-1050.
- Width: 1200 mm.... |
|
|
 |
Brand: Unifiller
Stainless steel dosing pump for soft, creamy doughs or doughs with pieces up to 19 mm.
Manufacturer: Unifiller.
Origin: USA.
Model: Universal 1000i.
Funnel with a capacity of 52 liters.
Various applications in the cake and dessert indu... |
|
|
 |
Brand: Ishida, Tecnor, Uhlmann
Complete line of pharmaceutical packaging for solids.
It can be used independently or in a continuous line.
Line composed of:
- Universal automatic feeder.
- Automatic blister.
Manufacturer/brand: Uhlmann.
Model/type: UPS 300.
- ... |
|
|
 |
Universal mill for herbs, cinnamon, pepper, salt, sugar and solid products that can be ground in the disc system and sieve.
Compact, high performance, all stainless steel unit with all parts installed in a single set, which is especially suitable ... |
|
|
 |
Brand: Incal
Components: SEW, SEW-Eurodrive, WEG
Universal stainless steel vacuum food processor.
Manufacturer: Incal.
Geiger type processor.
Estimated total capacity: 160 L.
Components:
Shear cutter motor.
Manufacturer: WEG.
30 hp.
Upper lid scraper motor:
Manufacturer: ... |
|
|
 |
Brand: Geiger, Incal, Stephan
Components: Lukma
Jacketed geiger food processor.
With heating system.
Capacity: 100 liters.
With new panel in stainless steel and new electrical.
Panel components:
Circuit Breaker: Lukma DZ47-63 C63
Contactor: Lukma CJX2-4011.
Auxiliary contact b... |
|
|
 |
Brand: Baoyuda
Stainless steel universal mill.
Brand/manufacturer: Baoyuda.
Model: SF-180.
Approximate capacity: up to 30 kg/hour.
Equipped with a hammer turbine for grinding dry products.
Supplied with sieves for processing very fine grains (used fo... |
|
|
 |
Brand: Universal
Chocolate temperer.
Brand: Universal.
Model: Temper 2.
Capacity: 2 kg.
Equipment for melting and tempering chocolates, with high-precision digital thermostat; temperature control for melting and tempering and removable bowl.
Single-pha... |
|
|
 |
Brand: Geiger
Universal industrial cutter chipper processor.
Brand: Geiger.
Model: UM 50.
Capacity: 50 L.
Stainless steel equipment.
With 10 hp engine.... |
|
|
 |
Brand: Bauermeister
Universal mill in stainless steel.
Brand Name: Bauermeister.
Extra rotor without use (turbo rotor).
Engine: 50 cv.
Aspiration: 30 m³ / ³.
Rotation: 2000 RPM.
Mill for fine and ultrafine particles.
Mills for: Cosmetics Dextrose Fe... |
|
|
 |
Brand: Ferdimat
Rectifies universal cylindrical.
Brand: Ferdimat.
Model: UA121.
Year: 1987.
In operation for 15 years, stop at 60 days, with weekly movement to lubricate moving parts.
Serial Number: 87071353.
Center height: 170 mm.
Rectifiable l... |
|
|
 |
Brand: Geiger
Universal food processor.
Brand: Geiger.
With 40 litres capacity.
Stainless steel equipment, overhead door.
-Processes in one machine:
móe cut, mince, mix, emulsifica and kneads, all in a single operation.
Ideal for: vegetables, pures, ... |
|
|
 |
Brand: Geiger
Universal processor brand, with a capacity of 50 litres.
motor 7.5 HP
Renders in one machine:
móe cut, mince, mix, emulsifica and kneads, all in one single operation.
Ideal for: vegetables, pures, mayonnaise, gravy, creams,
dry products, ... |
|
|
 |
Brand: Krones, Krones Universella
Labeling machine for beer.
Brand: Krones Universella.
Model: K723B95 / 1.... |
|
|
 |
Brand: Tigre
Universal stainless steel hammer mill for fruit and pulp.
Manufacturer: Moinhos Tigre.
With sieve.
It has no electric motor.
Approximate capacity: up to 1 ton per hour.... |
Others suggested equipment for you:
|
|
 |
Semi automatic baler for SOAP (without mold).... |
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Brand: Jones
Press Jones and conveyor belts... |
|
|
 |
Brand: G.Mazzoni, Jones, KHS, Mazzoni, Mazzoni LB
Sigma mixer, calender, extrusion and soap press.
Estimated production capacity: between 900 kg / h * up to 1,000 kg / h **.
Machines for the manufacture of soap composed of:
Sigma mixer for soaps.
Brand: G.Mazzoni.
Yield: 175 kg of bas... |
|
|
 |
Brand: Astembor
Components: Atos
Presses for Vulcanizing
working pressure bar 120
500 x 500 mm Plateau
Go to gap between plateaus 110 mm
Operation on both sides with aperture of the array table
Programming manual from time and degaseification via CLP-Acts... |
|
|
 |
Brand: Heidelberg
Hydraulic Press Heidel... |
|
|
 |
Swing oil packaging, unused 2010 ... |
|
|
 |
Installers of air conditioning/production of ducts.
Production: bending and performs the functions with plates up to 1.5 mm.
year: 2014.
Model: Triplex (TDC flange, hip and clip).
In great condition used only 30 days of use for calibration.
... |
|
|
 |
Brand: Andritz
Press filter.
Brand: Andritz.
The whole set for sale for an unbelievable price, the set comprises:
- Frame (frame) 800/60.
- Drawing pressure 8 bar.
- Locking system 264MPA-E, single acting hydraulic cylinder with return
by spring and... |
|
|
 |
Brand: Claumaq, Conserli, Lobopack
SOAP-making line composed by:
-stainless steel Mixer dust.
Brand Name: Conserli.
Model: MP 200.
Year: 2006.
Capacity: 200 kg.
Motor 1.5 HP.
1.50 m x 1.00 m x 1.60 time.
-
SOAP cutter Has 21 teeth, this in perfect operating condi... |
|
|
 |
Brand: Barban Vicentini
150 TON PRESS
REVERSE 180 TON PRESS
300 TON PRESS VICNETINI BARBAN OLD MODEL
... |
|
|
 |
Brand: Nardini
Lathe.
Brand: Nardini.
Model: MS-350.
Dimensions: 1.50 m of busbar.... |
|
|
 |
|
|
|
 |
Brand: French Oil Mill Machinery, Imapre
02 large Presses with capacity of 750 tonnes (brand name: THE FRENCH OIL MILL MACHINERY co.)
04 small Presses with a capacity of 350 tonnes. (tag: IMAPRE)
fully automated Greenhouse
02
Retificas for wheel... |
|
|
 |
Brand: Vitoria
-Milling machine Brand Vitoria, with cambio, Motor and 2 heads (horizontal and vertical Machining) Splitter and dividers, and some records of milling cutter and endmill.
presses Rocker type with screw will free from 650 mm
-Type Body with fiber p... |
|
|
 |
Brand: Giustina Farell
Diameter: 2600 mm.
Step in the movement: 2032 mm.
permissible length between centers: 10000 m
maximum weight between centers: 200 tons.
Fagor 8055 CNC: S
year: 80.
Weight: Approximately 250 tons.... |
|
|
 |
Brand: Poreba
Lathe.
Brand: Poreba.
Model: TCG 200 Mach.... |
|
|
 |
Around
CNC Machine 195II year 2004 model Nardini logic
tyre, * point with k12k *
electric Tower 8 positions
pneumatic Plate diam 8 k12k autoblok of * *
MCS Command
... |
|
|
 |
Brand: Oxipira
- Plasma cutting machine.
- Brand: Oxipira.
- Equipment year: 2015.
- Machine purchased and never used.... |
|
|
 |
Brand: ROMI
CNC lathe Romi Centur 30 D Multiplic.
Year: 2007.
Control: Fanuc.
Electric Tower 8 positions.
Among tips: 1,000 mm.
Against pneumatic point.... |
|
|
 |
Brand: VMA
Plaina limadora.
Brand: VMA.... |
|
|
 |
Brand: ROMI
Components: Siemens
Machine: Discovery 560
Manufacturer: ROMI
command: SIEMENS
main Motor: 9.3 KW
power: * k12k 20KVA * year of manufacture: 2005
tree Cone: ISO 40
RPM: 7500
course in "Z": 508
fast forward (X/Y/Z): 30 m/min
courses (X/Y/Z): 560 X 406 X... |
|
|
 |
Brand: Rocco
CNC Vertical milling machine
* F 700 (CNC)
k12k * Mark ROCCO *-F MODEL 700
400 * k12k DIADUR command *
... |
|
|
 |
Brand: Nomura
Mechanical guillotine mark Nomura, cutting capacity-mild steel 55 mm, length 1200 mm cutting useful motor power 55 kw, knife length 1830 mm, weight 45 tonnes... |
|
|
 |
01-03 ton press (green)
-01 03 ton press (green) c/bookmark
-preensa 01 of 04 ton (Brown)
-01 08 ton press (green)
-01 08 ton press (green)
-01 nylon roller machine p/cutting torch parts
-01 p/calender tracking parts and or materials
to... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Camargo Industrial acts exclusively as an advertising platform. All information, photos, descriptions, conditions, and equipment compliance are the sole responsibility of the advertisers, and it is up to the buyers to verify their accuracy before purchasing. Camargo Industrial does not guarantee the accuracy, completeness, legal and technical availability of the advertised equipment.
Workplace safety with machinery: The platform does not perform inspections or certifications. The suitability of equipment to standards is the responsibility of sellers and buyers.
|
 |
| |
|
