|
Used machines for sale
Slitter longitudinal cutting line Squares 10 tons
>> Metal
>> Slitters
|
|
|
|
|
| Slitter longitudinal cutting line Squares 10 tons |
|
Slitter line cut to length.
Manufacturer: Squares.
Model: LCL1230.0
Year: 2022.
Approximate capacity: up to 10 tons.
For galvalume and galvanized coils.
Maximum speed: 25 meters per minute.
Maximum coil width 1,250 mm.
Total weight: 1,482 kg.
Voltage: 380V.
Minimum thickness: 0.30 mm.
Maximum thickness: 1.00 mm.
Maximum LE of the material: : 240 N / mm².
Maximum material LR: 380 N / mm².
Frequency: 80Hz.
Approximate unwinding capacity: 10,000 kg.
Approximate rewind capacity: 880 kg.
Duty cycle: 8 hours.
Total current: 5.5 A.
Total power: 3.62 KVA. |
Brand:
Esquadros
|
|
|
|
|
|
Main suggestions:
|
|
 |
Carrier and Wafer card Slitter.... |
|
|
 |
Pill counter with 3 solder packaging machine.
Tablet counting system by vibrating feeder.
The vibrating feed feeds the volumetric dosing of the vertical packaging machine.
The contact tablets are sealed with 3 welds per vertical packaging sy... |
|
|
 |
Brand: ARV, Fabrima
Vertical packaging with 4 solder systems, 4 clamps.
Brand: Fabrima / ARV.
Like "fake stand up pouch".
Bottom sealing: 20 cm.
Top sealing: 35 cm.
Stretcher: 60 cm.... |
|
|
 |
Brand: ARV, Bosch, Fabrima, Moinhos Tigre, Semco, TekPack, Tigre
Components: Coel, Dakol, Danfoss, Festo, Fotek, GWA, JHM, Parker, Siemens, Switron, Unitronics, WEG
Complete line for the manufacture of chocolate powder and other blenders.
With high automation and space optimization, compact machines with structures for verticalization (platforms, mezzanine, elevator, connections, conveyor threads, dimensioned... |
|
|
 |
It manufactures a production line for zipper sliders.
The zipper slider factory is responsible for producing sliders, which are the metal parts responsible for opening and closing the zipper when they are slid over the teeth.
Slider Production ... |
|
|
 |
Brand: Dal Mak
Complete line for packaging window frames, metal profiles and carpets.
Brand: Dal Mak.
Composed by:
Product entrance mat.
Sealer for thermo shrinkable film, with side sealing (U-sealing), special for saving films (when the L-sealing is pu... |
|
|
 |
Machine for candy to put in the bag
Mixer with two axles
complete line of Dairy
Tube
Packinghouse to 15 Kg
3-wire machine mechanical Stretcher screens with a maximum capacity of 40 cm, 4 x 4 Carousel machine
machine to make baby socks, ... |
|
|
 |
Brand: Hansel Processing, Otto Haensel
Components: WEG
Spider wire input wire with 800 kg.
With pneumatic position change with automatic control of machine stop in case of wire breakage.
One side profiling machines with steel wire gauges.
With 3.30 m to 3.10 mm with 4 work tables.
28 m in lengt... |
|
|
 |
Pneumatic slitter for soap.... |
|
|
 |
Brand: Indumak
Line for mixing and packing with ribbon blender and Indumak floor:
-Packer/trademark Indumak package.
Model: MG1000.
Excellent state of conservation.
Packing type solder pad and FP 1000 feeder of Indumak, for the dosing of powders and c... |
|
|
 |
Brand: Rodighero
Floor type Bundling with sealing and tunnel trainer.
Rodighero
Manufacturer Machine automatic monoblock baler ER 400.
Used for beverages, foods and chemicals (for example: SOAP, detergent and paint);
cutting and automatic sealing System with ... |
|
|
 |
Brand: SISIMAR
Vertical wrapper for 3 solder packs.
Brand: Sisimar.
Volumetric dosing system on the conveyor.
For packing 3 welds.... |
|
|
 |
Brand: Almapal, Bausch
Glass Bottle Washer The machine has 8 wet and dry cleaning stations. The sequence in which the media will be used is in accordance with the customer's request.
Exit station.
Here the conveyor pliers open and the slider arm pulls the objects int... |
|
|
 |
Brand: Selovac
Vacuum sealing machine.
Brand Name: Selovac.
Model: Double.
Year: 2012.
Machine operated for 4 years in low level of production, being used rarely.
It serves to pack vacuum products, removing the air and sealing the packaging with doub... |
|
|
 |
Brand: Masipack
Components: WEG
1-MACHINE for PRODUCTION of CHOCOLATE ICING, COMPOSED of:
2 encamisados Tanks and carbon steel cap. 1200 litres.
1
chocolate pump dägua pump
refiner Mill (sphere), 25 engine HP
2 COBRIDEIRA Fab. Argentina
Blower with temperature controlle... |
Others suggested equipment for you:
|
|
 |
Brand: G.Mazzoni, Jones, KHS, Mazzoni, Mazzoni LB
Sigma mixer, calender, extrusion and soap press.
Estimated production capacity: between 900 kg / h * up to 1,000 kg / h **.
Machines for the manufacture of soap composed of:
Sigma mixer for soaps.
Brand: G.Mazzoni.
Yield: 175 kg of bas... |
|
|
 |
Semi automatic baler for SOAP (without mold).... |
|
|
 |
Brand: Jones
Press Jones and conveyor belts... |
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
2 thermal hydraulic presses for rubber
3 500 x 500 3 Dishes go 2 1/2 column 250 mm piston resistance heating
3 500 x 400 3 Dishes go 2 column "150 mm piston oil heating
500 mm Working Area (both)... |
|
|
 |
Brand: ROMI
CNC lathe Multiplic 35 S.
Brand: ROMI.... |
|
|
 |
Press with 14 holes for paçoca.... |
|
|
 |
Brand: Heller
Machining center brand/manufacturer Heller.
Available for sale 5 units.
Model: MCP H 250
Machine underwent maintenance.
-equipment Data
-Desktop:
-longitudinal x-axis Stroke (mm)-800
-longitudinal Stroke y-axis (mm)-800 ... |
|
|
 |
Brand: Astembor
Components: Atos
Presses for Vulcanizing
working pressure bar 120
500 x 500 mm Plateau
Go to gap between plateaus 110 mm
Operation on both sides with aperture of the array table
Programming manual from time and degaseification via CLP-Acts... |
|
|
 |
Brand: ROMI
CNC lathe
brand name: Romi Centur k12k * model: * 30 D
Command
year 9 Mach 2004.
With electric Tower 8 positions.... |
|
|
 |
Brand: Stankoimport
About Paral·lel the 3 guide stankoimport (kramatorsk) 1a665
year: 1984
height: 850 mm point
distance between centers: 16000 mm
max on bench: 1600 mm
max in motion: 1250 mm
pallet width: 1850 mm
flow between the tips: 40 ton
spindle mo... |
|
|
 |
Brand: Rocco
CNC Vertical milling machine
* F 700 (CNC)
k12k * Mark ROCCO *-F MODEL 700
400 * k12k DIADUR command *
... |
|
|
 |
Brand: Nardini
Lathe.
Brand: Nardini.
Model: NDT-650 Nodus.
Dimensions: 2.90 m of bus.... |
|
|
 |
Brand: Mazak
Horizontal lathe.
Brand: Mazak.
Model: Mazak Quick Turn Smart 350.
Year: 2015.... |
|
|
 |
Brand: Ares Seiki
Machining center.
Brand Name: Ares Seiki.
Model: A-600.
Fanuc Command.
Courses: 600 mm x 400 mm x 600 mm.
table size: 700 mm x 410 mm/8,000 RPM-BT 40.
Magazine Exchange quickly for 24 tools.
Advances: 36/36/36 m for minute... |
|
|
 |
Brand: Oxipira
- Plasma cutting machine.
- Brand: Oxipira.
- Equipment year: 2015.
- Machine purchased and never used.... |
|
|
 |
Brand: ROMI
CNC lathe Romi Centur 30 D Multiplic.
Year: 2007.
Control: Fanuc.
Electric Tower 8 positions.
Among tips: 1,000 mm.
Against pneumatic point.... |
|
|
 |
Brand: Andritz
Press filter.
Brand: Andritz.
The whole set for sale for an unbelievable price, the set comprises:
- Frame (frame) 800/60.
- Drawing pressure 8 bar.
- Locking system 264MPA-E, single acting hydraulic cylinder with return
by spring and... |
|
|
 |
Installers of air conditioning/production of ducts.
Production: bending and performs the functions with plates up to 1.5 mm.
year: 2014.
Model: Triplex (TDC flange, hip and clip).
In great condition used only 30 days of use for calibration.
... |
|
|
 |
Brand: Giustina Farell
Diameter: 2600 mm.
Step in the movement: 2032 mm.
permissible length between centers: 10000 m
maximum weight between centers: 200 tons.
Fagor 8055 CNC: S
year: 80.
Weight: Approximately 250 tons.... |
|
|
 |
Rectify 18000 mm x 2000 mm
Measures-18000 mm x 2000 mm
height: 2000
02 Heads, a
Rotary hydraulic feeding with four engines
With wiring diagrams
... |
|
|
 |
Brand: Maho
MARK MAHO MH MODEL 600E with CNC432 COMMAND and COLOR VIDEO GRAPHIC CONNECTION 24V for 22 tools, NP 48588, IS0 40. ... |
|
|
 |
Brand: Poreba
Lathe.
Brand: Poreba.
Model: TCG 200 Mach.... |
|
|
 |
Tacho inox.
Capacity: 2000 l.
Tacho inox.
Capacity: 660 l.
Tacho inox.
Capacity: 200 l.... |
|
|
 |
Brand: Heidelberg
Hydraulic Press Heidel... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Camargo Industrial acts exclusively as an advertising platform. All information, photos, descriptions, conditions, and equipment compliance are the sole responsibility of the advertisers, and it is up to the buyers to verify their accuracy before purchasing. Camargo Industrial does not guarantee the accuracy, completeness, legal and technical availability of the advertised equipment.
Workplace safety with machinery: The platform does not perform inspections or certifications. The suitability of equipment to standards is the responsibility of sellers and buyers.
|
 |
| |
|
