|
Used machines for sale
Presses
>> Metal
>> Metal /
|
|
|
|
|
| Presses |
|
01-03 ton press (green)
-01 03 ton press (green) c/bookmark
-preensa 01 of 04 ton (Brown)
-01 08 ton press (green)
-01 08 ton press (green)
-01 nylon roller machine p/cutting torch parts
-01 p/calender tracking parts and or materials
to observe. all working and engine.
|
|
|
|
|
|
|
|
Other similar equipment for research results
:
|
|
 |
Brand: Peres & Canheiro
Dosing machine with horizontal stainless steel paddle mixer.
Manufacturer | Brand: Peres & Cannheiro.
Approximate capacity: 120 kg.
For pasty and granular products such as crushed garlic, garlic paste, creamy candies in jars such as dulce de... |
|
|
 |
Brand: Peres & Canheiro
Dosing machine with horizontal stainless steel paddle mixer.
Manufacturer | Brand: Peres & Cannheiro.
Approximate capacity: 120 kg.
For pasty and granular products such as crushed garlic, garlic paste, creamy candies in jars such as dulce de... |
|
|
 |
Brand: Piróg
Automatic chocolate dispenser.
Manufacturer/brand: Piróg.
Equipment with a width of 1 m and 22 nozzles for dosing solid chocolate.
Receiving silo with resistance heating and agitator.
Parts in contact with the product in stainless steel, ... |
|
|
 |
Brand: ACG, Almapal, Pam
Components: Hindustan, Siemens
Vacuum ACG Pam for tablet press encapsulation.
Brand: ACG Pam.
Engine: 3.0 HP.
R.P.M: 3450.
Frequency: 60 Hz.
Components:
Hindustan Engine.
3TW42 Siemens Encapsulated Starter Magnetic Switch.... |
|
|
 |
NAW rotary press.
Ability to manufacture 200 paçocas per minute.... |
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Jacketed stainless steel pressure reactor.
With motor, reducer and scraper shaft.
Approximate capacity: up to 200 liters.
For mixing homogenization of products such as cosmetics, chemicals, among others.
Equipment internally in stainless ... |
|
|
 |
Brand: Bomax
Filter press with polypropylene chamber plates.
Manufacturer/Brand: Bomax.
Model: 20/30.
Number of plates: 20.
Maximum number of plates allowed: 30.
Intended for solid-liquid separation (solids filtration) through the forced passage of... |
|
|
 |
Technical consultancy for the purchase and sale of new and used equipment.
For various segments such as: Food, Cosmetics, Pharmaceuticals, Nutraceuticals, Chemicals, Agro, Pets and others.
Main equipment:
- Vertical Filling Machine (Pillow |... |
|
|
 |
Brand: Sorg
Guillotine press for cutting sheet metal.
Manufacturer: Sorg.
Model: SGH 47 / 30.... |
|
|
 |
Services, Technical Support, Training, Installations, Renovations and Solutions in Process and Packaging Equipment (Pasteurization and UHT/Long Life).
- Maintenance and Technical Support:
With a highly qualified team, we offer services to maint... |
|
|
 |
Brand: Piróg
One shot dispenser with 1 nozzle.
Manufacturer | Piróg brand.
Equipment for manufacturing filled chocolates, such as bonbons, truffle cones, bars, etc.
Approximate production: 800 units/hour.
Approximate dimensions:
Height: 1.05 m.
... |
|
|
 |
Semi-automatic paçoca cork press.
Approximate production: up to 200 units per minute.
With two ways and output channels for feeding the packaging machine.
Hole diameter: 30 mm.
Height: adjustable.
1.5 HP engine and 1700 rpm.
Voltag... |
|
|
 |
Brand: Piróg
Dosing machine for liquids and semi-liquids.
Manufacturer: Piróg.
For dosing different densities of products, such as: meringues, jellies, diet candies, carolina, manioc flour biscuits (balls and sticks), champagne biscuits, English cake, filli... |
|
|
 |
Brand: Rtech
Pilot plant for biscuit processes.
Manufacturer: RTech.
Model: MiniLab.
For the development of biscuit processes.
Composed by:
- Mixer in stainless steel.
- Laminator.
- Foliage and flour sprinkler system.
- Rotary moulder wit... |
|
|
 |
Brand: Piróg
Dosing of fluid and semi-fluid mixtures with 28 nozzles.
Manufacturer: Pirog.
Equipment 1 m wide and ruler with 28 nozzles.
For airy doughs such as meringue, maria mole, meringue or others.
With stainless steel mass receiver with plungers... |
|
|
 |
Hydraulic press.
Manufacturer: Hidrodynamic Machines.
Type: HD 40.
Year: 1997.
Stroke: 400 mm.
Strength: 40 tons.
Maximum Pressure: 180kg / cm2.
Engine: 30 hp.... |
|
|
 |
Brand: Piróg
Dosing drip pan for sweet and savory doughs.
Brand: Piróg.... |
|
|
 |
Brand: Dal Mak
Complete sealing line for rolls and/or prismatic pieces with length up to 2.5 meters, bundling process.
Brand: Dalmak, Dal Mak.
Type U Sealer, manufacturer Dalmak.
Complete retrofitted equipment.
It packs reels of fabrics, carpets, synthe... |
|
|
 |
Brand: Piróg
Dosing machine for chocolates and creams.
Brand: Piróg.
Equipment with two vats, ideal for chocolate products, tablets, drops and chocolates.
Width: 450 mm.
Number of nozzles: 52.... |
|
|
 |
Wafer sheet forming and assembly machine and wafer sheet press.
Cylinder press to adjust the height and thickness of the wafer sheets.
First, the block is formed with wafer sheets, and then the block is pressed by the cylinder to adjust the hei... |
|
|
 |
Table with two tubs of approximately 100 liters.
With sliding piston system to extract juices.... |
|
|
 |
Brand: Hebleimar, Piróg
Line for the production of sweets like "denies tit", Dan Nhá.
consisting of:
2 drip trays of marsmallow with 14 burners each.
cooling tunnel and chocolate brand cobrideira Piróg.
Measures: width 1.10 m by 10 m length and height 1.25 m.
widt... |
|
|
 |
Stamping set for hard candies.
Model: IMD.... |
|
|
 |
Coating machine for tablets, food, and sweets for the coating process.
The information below is estimated from the photo.
Estimated capacity: 150 L to 200 L total.
Body in carbon steel, tank in stainless steel.... |
Others suggested equipment for you:
|
|
 |
Semi automatic baler for SOAP (without mold).... |
|
|
 |
Brand: G.Mazzoni, Jones, KHS, Mazzoni, Mazzoni LB
Sigma mixer, calender, extrusion and soap press.
Estimated production capacity: between 900 kg / h * up to 1,000 kg / h **.
Machines for the manufacture of soap composed of:
Sigma mixer for soaps.
Brand: G.Mazzoni.
Yield: 175 kg of bas... |
|
|
 |
Brand: Jones
Press Jones and conveyor belts... |
|
|
 |
Brand: ROMI
CNC lathe
brand name: Romi Centur k12k * model: * 30 D
Command
year 9 Mach 2004.
With electric Tower 8 positions.... |
|
|
 |
Press with 14 holes for paçoca.... |
|
|
 |
Brand: Maho
MARK MAHO MH MODEL 600E with CNC432 COMMAND and COLOR VIDEO GRAPHIC CONNECTION 24V for 22 tools, NP 48588, IS0 40. ... |
|
|
 |
Brand: Nomura
Mechanical guillotine mark Nomura, cutting capacity-mild steel 55 mm, length 1200 mm cutting useful motor power 55 kw, knife length 1830 mm, weight 45 tonnes... |
|
|
 |
Installers of air conditioning/production of ducts.
Production: bending and performs the functions with plates up to 1.5 mm.
year: 2014.
Model: Triplex (TDC flange, hip and clip).
In great condition used only 30 days of use for calibration.
... |
|
|
 |
Brand: Vitoria
-Milling machine Brand Vitoria, with cambio, Motor and 2 heads (horizontal and vertical Machining) Splitter and dividers, and some records of milling cutter and endmill.
presses Rocker type with screw will free from 650 mm
-Type Body with fiber p... |
|
|
 |
Brand: Giustina Farell
Diameter: 2600 mm.
Step in the movement: 2032 mm.
permissible length between centers: 10000 m
maximum weight between centers: 200 tons.
Fagor 8055 CNC: S
year: 80.
Weight: Approximately 250 tons.... |
|
|
 |
Around
CNC Machine 195II year 2004 model Nardini logic
tyre, * point with k12k *
electric Tower 8 positions
pneumatic Plate diam 8 k12k autoblok of * *
MCS Command
... |
|
|
 |
Brand: Oxipira
- Plasma cutting machine.
- Brand: Oxipira.
- Equipment year: 2015.
- Machine purchased and never used.... |
|
|
 |
Brand: Mazak
Horizontal lathe.
Brand: Mazak.
Model: Mazak Quick Turn Smart 350.
Year: 2015.... |
|
|
 |
Press to manufacture peanut butter cups stopper, capacity 140 pieces/minute
... |
|
|
 |
Brand: Nardini
Lathe.
Brand: Nardini.
Model: NDT-650 Nodus.
Dimensions: 2.90 m of bus.... |
|
|
 |
Brand: Stankoimport
About Paral·lel the 3 guide stankoimport (kramatorsk) 1a665
year: 1984
height: 850 mm point
distance between centers: 16000 mm
max on bench: 1600 mm
max in motion: 1250 mm
pallet width: 1850 mm
flow between the tips: 40 ton
spindle mo... |
|
|
 |
Bambury Cope AML 25.
Engine: 100 HP.
opening pneumatic valve.
4 mixer wings.
Automated switchboard.
In great condition.
Year: 1980.... |
|
|
 |
Brand: Poreba
Torno.
Brand: Poreba.... |
|
|
 |
Machine for production of steel wool.... |
|
|
 |
Brand: Nardini
Lathe.
Brand: Nardini.
Model: MS-350.
Dimensions: 1.50 m of busbar.... |
|
|
 |
Brand: Heller
Machining center brand/manufacturer Heller.
Available for sale 5 units.
Model: MCP H 250
Machine underwent maintenance.
-equipment Data
-Desktop:
-longitudinal x-axis Stroke (mm)-800
-longitudinal Stroke y-axis (mm)-800 ... |
|
|
 |
Tacho inox.
Capacity: 2000 l.
Tacho inox.
Capacity: 660 l.
Tacho inox.
Capacity: 200 l.... |
|
|
 |
Brand: ROMI
Components: Siemens
Machine: CENTUR 50 d
Manufacturer: ROMI
command: SIEMENS
main Motor: 33.6 KW
power: 50 KVA
year of manufacture: 2009
Home tree axis (mm): 135
RPM (2 tracks): 1 ~ 258/1 ~ 1048
Diameter on the bus: 700
course in (X/Z): 520/3020
fast... |
|
|
 |
|
|
|
 |
Set the hot and cold rolling mill for aluminum
consists of 4 (four) modules rolling and in perfect working condition with year of manufacture 2008.
big Mill with 686 x cylinders measures 1,203 small mmLaminador with 600 cylinders measures x 1,170... |
|
