|
|
|
| Alfa Laval SHL 25 high-pressure piston homogenizer |
|
High-pressure piston homogenizer.
Manufacturer | Brand: Alfa Laval.
Model: SHL 25.
Maximum production capacity: up to 9,000 L/H at 250 bar pressure.
Refurbished.
Equipment with panel.
For the food, beverage, dairy, cosmetics, pharmaceutical, and biotechnology industries, among others.
Low- to high-viscosity, aseptic and non-aseptic emulsions and suspensions, including pasteurized milk, UHT milk, cream, yogurt, condensed milk, ice cream mix, fruit juices, concentrates, purées, tomato pastes, seasonings, mayonnaise, sauces, and dressings. |
Brand:
Alfa Laval
|
|
|
|
|
|
Main suggestions:
|
|
 |
Brand: Alfa Laval
Components: SEW-Eurodrive
Lobe pump in 316 stainless steel.
Manufacturer: Alfa Laval.
Motor: 7.5 Kw, manufacturer: Sew-Eurodrive.
Model: SRU4 / 055 / LS.
Year: 2017.
Voltage: 460 V.
Amperage: 12.30 A.
Three-phase.
Protection rating: IP 55.
R.P.M: 17... |
|
|
 |
Brand: Alfa Laval
Skid-mounted centrifugal separator for cleaning oils from hydraulic and other similar systems.
Manufacturer: Alfa Laval.
Maximum capacity: 10.6 m³/h, depending on the product.
Model: MAB 206.
The equipment was recently overhauled and skid... |
|
|
 |
Brand: Alfa Laval
Bactofugal vertical centrifuge with automatic discharge for milk clarification.
Manufacturer: Alfa Laval.
Model: BB-10 HGV.
Approximate hydraulic flow rate: 10,000 L/H.
Approximate flow rate for bacteria removal: 5,000 L/H.
Year: 2017.... |
|
|
 |
Brand: Alfa Laval
Components: SEW
Lobe pump in 316 stainless steel.
Manufacturer's brand: Alfa Laval.
Motor: 11 kW.
Year: 2011.
Internal diameter of product inlet/outlet: approximately 77 mm 78 mm. Check photos of the caliper.
Positive test for 316 stainless steel reag... |
|
|
 |
Brand: Alfa Laval
Components: SEW
Lobe pump in 316 stainless steel.
Manufacturer's brand: Alfa Laval.
Motor: 7.5 kW.
Internal diameter of product inlet/outlet: approximately 46 mm 48 mm. Check photos of the caliper.
Positive test for 316 stainless steel reagent. Check pho... |
|
|
 |
Brand: Alfa Laval
Plate heat exchanger.
Stainless steel.
Brand: Alfa Laval.
Model: M3 - FHC.
Maximum working pressure: 1.0 MPa / 10.0 Bar.
Maximum working temperature: 110 ° C.
Volume: 3 L.... |
|
|
 |
Brand: Alfa Laval
Alfa Laval sanitary transfer pump
- Pontecia: 7.5 hp - 3 phases.
- Voltage: 220/380 V.
- A 19.1 / 11.1
- Hz 60
- 3,500 rpm... |
|
|
 |
Brand: Alfa Laval
Stainless steel cooling tank.
Brand: ALFA LAVAL.
Approximate capacity: 1000L.... |
|
|
 |
Brand: Alfa Laval, Tetra Pak
Stainless steel sanitary valve manifold cluster.
Composed of:
- 12 Mixproof valves | double seat valves.
Manufacturer | brand: Alfa Laval.
Mixproof valves or double seat valves are special sanitary valves used to keep two liquids complete... |
|
|
 |
Brand: Alfa Laval
System for heating thermal fluid.
Brand: Alfa Laval, Aalborg.
Model: 25 - HO- 25M.
Year: 2009.
Thermal capacity: 2,500 Kcal / Hour.
Volumetric capacity: 2175 liters.
P.M.T.A: 150 Psig.
Hydrostatic Test: 225 Psig.
Category: 3.
... |
|
|
 |
Brand: Aalborg, Alfa Laval
Heater for industrial heating thermal fluid.
Brand: Alfa Laval Aalborg.
Model: 50 - HO - 50 M.
Process: Thermal fluid heater for propane refining.
Thermal capacity: - 5,000,000 KCAL/H
Volumetric capacity: 2960 Liters.
P.M.T.A - 300 ... |
|
|
 |
Brand: Alfa Laval
Stainless steel centrifugal pump.
Manufacturer | Brand: Alfa Laval.
Model: CRX 216 F.
Type: Sanitary.
Approximate flow rate: up to 10 m³/h.
Operated for 10 years.
Outlet: 2”.
The pump was used for transferring inverted sugar.
... |
|
|
 |
Brand: Alfa Laval
Horizontal stainless steel centrifuge separator for separating solids and liquids in food processes.
Manufacturer | brand: Alfa Laval.
Model: NX - 418.
Approximate capacity: 10,000 liters per hour.... |
|
|
 |
Brand: Alfa Laval
Separator centrifuge separator purify industrial oils.
Manufacturer | brand: alfa laval.
Model: mab 104.
Approximate capacity: 2,200 liters per hour.
To separate fine solids and other impurities.... |
|
|
 |
Brand: Alfa Laval
Stainless steel centrifuge separator for separating animal blood phases.
Manufacturer | Brand: Alfa Laval.
Model: BPM 209.
Approximate capacity: 5,000 liters per hour.
For separating plasma and hemoglobin.... |
|
|
 |
Brand: Alfa Laval
Centrifugal separator for industrial oils.
Manufacturer | brand: Alfa Laval.
Model: MOPX 205.
Approximate capacity: 4,900 liters per hour.
For separating fine solids and other impurities.
With panel.... |
|
|
 |
Brand: Alfa Laval
Stainless steel centrifuge for food processing such as juice, beer and wine production.
Manufacturer | brand: Alfa Laval.
Model: VNPX.
Approximate capacity: 2,400 liters per hour.... |
|
|
 |
Brand: Alfa Laval
Automatic centrifugal separator.
Manufacturer: Alfa Laval.
Model: MAPX-207.
With heater, vacuum pump, mug filter, 220 / 380 / 440 V transformer, control panel and waste tank.
For treatment of mineral oils in purification, clarification, d... |
|
|
 |
Brand: Alfa Laval, Endress Hauser, Endress+Hauser, Inox Biaso, Nordix
Stainless steel jacketed surge tank/mixer.
Manufacturer | Brand: Inox Biaso.
Approximate capacity: 2,000 liters.
Tank agitator with a 7.5 HP motor.
With a 3 HP Nordix lobe pump.
With a 20 HP Alfa Laval self-priming centrifugal pump.
... |
|
|
 |
Brand: Despurifil
Industrial Reverse Osmosis Water Purification System.
Manufacturer | Brand: Despurifil.
Model: DES-806.
Approximate production: up to 8,000 liters.
Permeate production: 65%.
Inlet water conductivity: around 130 µs/cm.
Outlet water c... |
|
|
 |
Brand: Alfa Laval
- Transfer pump in stainless steel.
Type Sol 10c2.
- B 190 mm.
- Brand: Alfa Laval.
... |
|
|
 |
Components: Alfa Laval
316 L stainless steel reactor with internal electrostatic polishing.
For viscous products.
For batches up to 12 tons, depending on the product density.
Internal part stainless steel 316 L electrostatic polishing.
Model: RD 100 - P120 - 15... |
|
|
 |
Brand: Alfa Laval
Industrial centrifuge.
Brand: Alfa Laval.
Model: FESX - 512.
Capacity: 90 m³ / h.
Centrifuge for cornstarch, cassava, alcohol.
Quantity: 2 units.... |
|
|
 |
Brand: Alfa Laval
Total area: 6213.00 m ²
built-up areas:
-milk reception platform: 77.20 m ²
-physical-chemical Laboratory: 14.56 m ²
-Microbiology Laboratory: 7.00 m ²
-manufacturing of cheese: m ²
156.60-circulation area: 36.34 m ²
-salting Chamber:... |
|
|
 |
Brand: Alfa Laval, Ata
fermenteira 01 1500 l with reg. 2
01 fermenteira 1000 l with reg. 2
01 fermenteira 500 l with reg. 2 02 sanitary pumps 2hp/2
01 strip 2
01 alfalaval expansion tank with NG 2 s/refrig unit. (740L)
01 reception tank 300 l with reg. 2 with lid... |
Others suggested equipment for you:
|
|
 |
Brand: KHS
Components: Allen-Bradley
Flow Pack Packaging.
Brand: KHS
model: Pack y.
the machine was formatted for packing SOAP, before the format and size of the product is cradled 120 units/minute.
Features PLC Allen Bradley.
Simple mordent.
Part that comes in c... |
|
|
 |
Brand: Bauch Campos, Delgo, Novelprint
Line for the manufacture of glue and packaging of 40 g / 90 g / 500 g / 1000 g consisting of:
- Mixer without shirt for glue and solution.
- Mixer with jacket and heating to make alcohol solution poliv.
- Automatic packaging machine, year 2013.
... |
|
|
 |
Caterpillar type soap cutter.
With 21 teeth.
Some knives are missing.
Approximate knife length: 120 mm. (photo 2)
Total width of roller track: 155 mm. (photo 32)
Maximum width of roller track adjustment: 110 mm. (photo 20 and 28)... |
|
|
 |
Brand: Fabrima, Masipack, Oystar
Components: Allen-Bradley, Altec, Festo, Rockwell, SEW
Machine: The Oystar Fabrima.
Year of manufacture: 2008.
Model: BP 5.
Vision system.
The PLC program is running normally.
Note: Video of binding machine, panel operation, bubble forming modules operation, aluminum film press, mat, coils... |
|
|
 |
Jacketed stainless steel pressure reactor.
With motor, reducer and scraper shaft.
Approximate capacity: up to 200 liters.
For mixing homogenization of products such as cosmetics, chemicals, among others.
Equipment internally in stainless ... |
|
|
 |
Stainless steel tank.
1000 litre capacity.
With motor and reducer.... |
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
G.Mazzoni soap extruder intermediary.
- To extrude soap and preliminarily homogenize the dough.
- With 300 mm thread and cutting system.
- Measure 2,10 in length x 1,30 in width.... |
|
|
 |
Stainless steel storage tank.
500 liters capacity.
With carbon steel support.
Output of the product from the side.
With motor and propeller shaft.... |
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
Cylinder and Duplex extruder vacuum Homogenizer... |
|
|
 |
Stainless steel tank with mixer and simple.
1400 litres capacity.... |
|
|
 |
Brand: Sterling Sihi
- Pump, modular vacuum system.
- Brand: Sterling Sihi / Flowserve
- Model: PL 126 M 10 0A
- Complete technical description of equipment and manual:
| |
|
 |
Brand: Indumak
Components: Atos, Festo, Siemens, WEG
Vertical powder packer with helical dosing system
Brand: Indumak.
Model: MG 8000.
With thread, dosing system and format.
With panel.
System of vision Acts series interactive.
Inverters Weg CFW 08.
CLP Atos MPC 4004.
Servo driv... |
|
|
 |
Brand: Imarvil
Simple shirt tank in stainless steel and with mixer.
500 liters capacity.
Brand: Irmavil.... |
|
|
 |
Brand: G.C.Neto
Cartridge stamper.
Manufacturer / brand: C. G. Neto.... |
|
|
 |
Brand: Claumaq
Mixer.
Brand: Claumaq.
Stainless steel internal tank, shaft and spatula
Capacity: 100 kg.
Measures: 1.80 m x 1.00 m x 1.54 m.
... |
|
|
 |
Brand: Parmasol
Line of aerosols.
Parmasol liquid packing machine.
Parmasol retractor.
Parmasol Gas Packing Machine.
Several tables in stainless steel.
Fixing table of Parmasol machines.
Compressed air transfer pump.
Manual sealing machines.
... |
|
|
 |
Brand: Posimat
Positioner from plastic bottles.
Brand: Posimat.
Model: Master-20.
Serial: 8764-MXI.
Uses all kind of bottles either light or heavy, cylindrical, oval or asymmetrical, with short necks or even without a neck, as covers plans elements ... |
|
|
 |
Brand: IMSB, Rodopac
Tampador automatic.
Model-TSB 25.6.
Manufacturer-IMSB.
Equipment designed for use in process lines where there is a need for automation in the closing of the plastic bottles, glass or metal. Developed to close bottles with various models of c... |
|
|
 |
Stainless steel tank.
150 litre capacity.
no motor.... |
|
|
 |
Brand: Jemak
Automatic sealer for cardboard boxes.
Sealing of the cardboard box by hot glue system, Hot Melt.
Brand: Jemak.
Model: HM 36.... |
|
|
 |
The machine is part of a line for production of SOAP g. Mazzoni.
Mat set:
1.80 m mat press input.
2.00 m mat press output.
8.00 m mat cutter output.
7.50 m mat return refining extruder.
Note: Uses for transportation of product... |
|
|
 |
Brand: Wada
Automatic electric Wada.
Brand: Wada.
Year: 1980.
... |
|
|
 |
Brand: Tirelli
Labelling machine for bottles, Cologne and perfumes.
Brand: Tirelli.
Model: Delta.
Year: 1999.
Height: 2.00 m.
Width: 1.80 meters.
Length: 2.40 metres.
Weight: approx. 300 kg.... |
|
|
 |
Brand: Prodismaq
- Packing machine for special products.
- Complete equipment built in stainless steel.
- It has 10 dispensing nozzles.
- The equipment was built as a special design, to pack flexible products that need support for conveyor belt, such as seru... |
|
|
 |
Ribbon Blender stainless steel
Brand: Uniâo Caldeiraria.
Stainless steel machine.
With equipment support.
It has cover with holder and security sensor.
With panel, motor and reducer.... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Camargo Industrial acts exclusively as an advertising platform. All information, photos, descriptions, conditions, and equipment compliance are the sole responsibility of the advertisers, and it is up to the buyers to verify their accuracy before purchasing. Camargo Industrial does not guarantee the accuracy, completeness, legal and technical availability of the advertised equipment.
Workplace safety with machinery: The platform does not perform inspections or certifications. The suitability of equipment to standards is the responsibility of sellers and buyers.
|
 |
| |
|
