|
Used machines for sale
Sell Presses
>> Metal
>> Metal /
|
|
|
|
|
| Presses |
|
01-03 ton press (green)
-01 03 ton press (green) c/bookmark
-preensa 01 of 04 ton (Brown)
-01 08 ton press (green)
-01 08 ton press (green)
-01 nylon roller machine p/cutting torch parts
-01 p/calender tracking parts and or materials
to observe. all working and engine.
|
|
|
|
|
|
|
|
Main suggestions:
|
|
 |
Brand: Peres & Canheiro
Dosing machine with horizontal stainless steel paddle mixer.
Manufacturer | Brand: Peres & Cannheiro.
Approximate capacity: 120 kg.
For pasty and granular products such as crushed garlic, garlic paste, creamy candies in jars such as dulce de... |
|
|
 |
Brand: Peres & Canheiro
Dosing machine with horizontal stainless steel paddle mixer.
Manufacturer | Brand: Peres & Cannheiro.
Approximate capacity: 120 kg.
For pasty and granular products such as crushed garlic, garlic paste, creamy candies in jars such as dulce de... |
|
|
 |
Brand: Piróg
Automatic chocolate dispenser.
Manufacturer/brand: Piróg.
Equipment with a width of 1 m and 22 nozzles for dosing solid chocolate.
Receiving silo with resistance heating and agitator.
Parts in contact with the product in stainless steel, ... |
|
|
 |
Filter for industrial processes in stainless steel sparkler type.
Year: 2004.
Hydrostatic test: 10.0 KGFcm²
Maximum permitted working pressure: 7.0 KGFcm².
Volume: 300 L.... |
|
|
 |
Brand: ACG, Almapal, Pam
Components: Hindustan, Siemens
Vacuum ACG Pam for tablet press encapsulation.
Brand: ACG Pam.
Engine: 3.0 HP.
R.P.M: 3450.
Frequency: 60 Hz.
Components:
Hindustan Engine.
3TW42 Siemens Encapsulated Starter Magnetic Switch.... |
|
|
 |
NAW rotary press.
Ability to manufacture 200 paçocas per minute.... |
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Jacketed stainless steel pressure reactor.
With motor, reducer and scraper shaft.
Approximate capacity: up to 200 liters.
For mixing homogenization of products such as cosmetics, chemicals, among others.
Equipment internally in stainless ... |
|
|
 |
Technical consultancy for the purchase and sale of new and used equipment.
For various segments such as: Food, Cosmetics, Pharmaceuticals, Nutraceuticals, Chemicals, Agro, Pets and others.
Main equipment:
- Vertical Filling Machine (Pillow |... |
|
|
 |
Brand: Sorg
Guillotine press for cutting sheet metal.
Manufacturer: Sorg.
Model: SGH 47 / 30.... |
|
|
 |
Services, Technical Support, Training, Installations, Renovations and Solutions in Process and Packaging Equipment (Pasteurization and UHT/Long Life).
- Maintenance and Technical Support:
With a highly qualified team, we offer services to maint... |
|
|
 |
Semi-automatic paçoca cork press.
Approximate production: up to 200 units per minute.
With two ways and output channels for feeding the packaging machine.
Hole diameter: 30 mm.
Height: adjustable.
1.5 HP engine and 1700 rpm.
Voltag... |
|
|
 |
Brand: Piróg
Dosing machine for liquids and semi-liquids.
Manufacturer: Piróg.
For dosing different densities of products, such as: meringues, jellies, diet candies, carolina, manioc flour biscuits (balls and sticks), champagne biscuits, English cake, filli... |
|
|
 |
Brand: Rtech
Pilot plant for biscuit processes.
Manufacturer: RTech.
Model: MiniLab.
For the development of biscuit processes.
Composed by:
- Mixer in stainless steel.
- Laminator.
- Foliage and flour sprinkler system.
- Rotary moulder wit... |
|
|
 |
Brand: Piróg
Dosing of fluid and semi-fluid mixtures with 28 nozzles.
Manufacturer: Pirog.
Equipment 1 m wide and ruler with 28 nozzles.
For airy doughs such as meringue, maria mole, meringue or others.
With stainless steel mass receiver with plungers... |
|
|
 |
Hydraulic press.
Manufacturer: Hidrodynamic Machines.
Type: HD 40.
Year: 1997.
Stroke: 400 mm.
Strength: 40 tons.
Maximum Pressure: 180kg / cm2.
Engine: 30 hp.... |
|
|
 |
Brand: Piróg
Dosing drip pan for sweet and savory doughs.
Brand: Piróg.... |
|
|
 |
Brand: Dal Mak
Complete sealing line for rolls and/or prismatic pieces with length up to 2.5 meters, bundling process.
Brand: Dalmak, Dal Mak.
Type U Sealer, manufacturer Dalmak.
Complete retrofitted equipment.
It packs reels of fabrics, carpets, synthe... |
|
|
 |
Brand: Piróg
Dosing machine for chocolates and creams.
Brand: Piróg.
Equipment with two vats, ideal for chocolate products, tablets, drops and chocolates.
Width: 450 mm.
Number of nozzles: 52.... |
|
|
 |
Wafer sheet forming and assembly machine and wafer sheet press.
Cylinder press to adjust the height and thickness of the wafer sheets.
First, the block is formed with wafer sheets, and then the block is pressed by the cylinder to adjust the hei... |
|
|
 |
Table with two tubs of approximately 100 liters.
With sliding piston system to extract juices.... |
|
|
 |
Brand: Hebleimar, Piróg
Line for the production of sweets like "denies tit", Dan Nhá.
consisting of:
2 drip trays of marsmallow with 14 burners each.
cooling tunnel and chocolate brand cobrideira Piróg.
Measures: width 1.10 m by 10 m length and height 1.25 m.
widt... |
|
|
 |
Stamping set for hard candies.
Model: IMD.... |
|
|
 |
Brand: Miller
Offset printing press.
Manufacturer | Brand: Miller.
Model: TP104/6.
Format: 74 x 104 cm, 6 colors with 2 reversals (6x0 - 4x2 - 5x1).
With non-stop infrared powder drying.
High stack, input and output, 6 Bawduin refrigerators, adjustm... |
|
|
 |
Brand: MONKEY
Rubber vulcanization press 700 x 500 mm.
Manufacturer | Brand: MONKEY.
Plate dimensions: 700 mm x 500 mm.
250 mm piston.
Has 3 slots.
Year: 1990.
For manufacturing rubber parts through vulcanization.
With 5 HP WEG motor.
Volta... |
Others suggested equipment for you:
|
|
 |
Semi automatic baler for SOAP (without mold).... |
|
|
 |
Brand: Jones
Press Jones and conveyor belts... |
|
|
 |
Brand: G.Mazzoni, Jones, KHS, Mazzoni, Mazzoni LB
Sigma mixer, calender, extrusion and soap press.
Estimated production capacity: between 900 kg / h * up to 1,000 kg / h **.
Machines for the manufacture of soap composed of:
Sigma mixer for soaps.
Brand: G.Mazzoni.
Yield: 175 kg of bas... |
|
|
 |
Brand: Barban Vicentini
150 TON PRESS
REVERSE 180 TON PRESS
300 TON PRESS VICNETINI BARBAN OLD MODEL
... |
|
|
 |
Brand: Ares Seiki
Machining center.
Brand Name: Ares Seiki.
Model: A-600.
Fanuc Command.
Courses: 600 mm x 400 mm x 600 mm.
table size: 700 mm x 410 mm/8,000 RPM-BT 40.
Magazine Exchange quickly for 24 tools.
Advances: 36/36/36 m for minute... |
|
|
 |
2 thermal hydraulic presses for rubber
3 500 x 500 3 Dishes go 2 1/2 column 250 mm piston resistance heating
3 500 x 400 3 Dishes go 2 column "150 mm piston oil heating
500 mm Working Area (both)... |
|
|
 |
Brand: Nardini
Lathe.
Brand: Nardini.
Model: MS-350.
Dimensions: 1.50 m of busbar.... |
|
|
 |
Brand: Clearing
Press.
Brand Name: Clearing.
Type: Hydraulics.
Year: 1992.
Capacity: 580 Tons.
GPM .: According to approach speed.
Course .: 1600.
Regulation: 1200.
Hammer: 2240 x 960 mm (Sheet press 2740 x 1200 mm).
Table: 2740 x 1220 mm.... |
|
|
 |
Brand: Mazak
Horizontal lathe.
Brand: Mazak.
Model: Mazak Quick Turn Smart 350.
Year: 2015.... |
|
|
 |
Set the hot and cold rolling mill for aluminum
consists of 4 (four) modules rolling and in perfect working condition with year of manufacture 2008.
big Mill with 686 x cylinders measures 1,203 small mmLaminador with 600 cylinders measures x 1,170... |
|
|
 |
Brand: Vitoria
-Milling machine Brand Vitoria, with cambio, Motor and 2 heads (horizontal and vertical Machining) Splitter and dividers, and some records of milling cutter and endmill.
presses Rocker type with screw will free from 650 mm
-Type Body with fiber p... |
|
|
 |
Brand: ROMI
CNC lathe Multiplic 35 S.
Brand: ROMI.... |
|
|
 |
Bambury Cope AML 25.
Engine: 100 HP.
opening pneumatic valve.
4 mixer wings.
Automated switchboard.
In great condition.
Year: 1980.... |
|
|
 |
Brand: ROMI
CNC lathe Romi Centur 30 D Multiplic.
Year: 2007.
Control: Fanuc.
Electric Tower 8 positions.
Among tips: 1,000 mm.
Against pneumatic point.... |
|
|
 |
Brand: Giustina Farell
Diameter: 2600 mm.
Step in the movement: 2032 mm.
permissible length between centers: 10000 m
maximum weight between centers: 200 tons.
Fagor 8055 CNC: S
year: 80.
Weight: Approximately 250 tons.... |
|
|
 |
Press to manufacture peanut butter cups stopper, capacity 140 pieces/minute
... |
|
|
 |
Brand: OKUMA
CNC lathe.
Mark Okuma.
Model LB 15.
Year 1990.
Missing controller.... |
|
|
 |
Brand: Nardini
Lathe.
Brand: Nardini.
Model: NDT-650 Nodus.
Dimensions: 2.90 m of bus.... |
|
|
 |
Brand: Tonanni
Planer table.
Brand Name: Tonanni.
Table 4.10 m x 1.40 m.
6 m long rail.
Height 1.80 m.... |
|
|
 |
Brand: VMA
Plaina limadora.
Brand: VMA.... |
|
|
 |
Installers of air conditioning/production of ducts.
Production: bending and performs the functions with plates up to 1.5 mm.
year: 2014.
Model: Triplex (TDC flange, hip and clip).
In great condition used only 30 days of use for calibration.
... |
|
|
 |
Brand: Nomura
Mechanical guillotine mark Nomura, cutting capacity-mild steel 55 mm, length 1200 mm cutting useful motor power 55 kw, knife length 1830 mm, weight 45 tonnes... |
|
|
 |
Brand: Poreba
Lathe.
Brand: Poreba.
Model: TCG 200 Mach.... |
|
|
 |
Brand: Fabrima
Tablet blender.
Brand Name: Fabrima.
Model: M301-PP3402.
Year: 2004.... |
|
|
 |
Brand: ROMI
CNC lathe Galaxy 10 Romi.
Year: 2002.
Fanuc 21I command.
Chip carrier.
Pistol washing.
12 Tower positions supported by tools.
Machine working 100%.... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Camargo Industrial acts exclusively as an advertising platform. All information, photos, descriptions, conditions, and equipment compliance are the sole responsibility of the advertisers, and it is up to the buyers to verify their accuracy before purchasing. Camargo Industrial does not guarantee the accuracy, completeness, legal and technical availability of the advertised equipment.
Workplace safety with machinery: The platform does not perform inspections or certifications. The suitability of equipment to standards is the responsibility of sellers and buyers.
|
 |
| |
|
