|
|
 |
Brand: MONKEY
Rubber vulcanization press 700 x 500 mm.
Manufacturer | Brand: MONKEY.
Plate dimensions: 700 mm x 500 mm.
250 mm piston.
Has 3 slots.
Year: 1990.
For manufacturing rubber parts through vulcanization.
With 5 HP WEG motor.
Volta... |
|
|
 |
Brand: Claumaq
Hydraulic press for bar soaps.
Manufacturer | brand: Claumaq.
Model: 001/2022.
Approximate capacity: up to 800 units per hour.
Manufactured in: 2022.
Equipment stopped since 2023.
For pressing bar soaps.... |
|
|
 |
H-type hydraulic press with two operating fronts and independent controls.
For compaction with automatic feeding silo.
Model: PHH100T.
Dough feeding, pressing and vertical and horizontal detachers.
Approximate capacity: 100 tons.
Dough... |
|
|
 |
Brand: Pan Stone
Double vacuum hydraulic press for rubber vulcanization.
Manufacturer: Pan Stone.
Model: P-V-500-A-2-PCD.
Approximate capacity: up to 500 tons.
Year: 2007.
It has 4 plates of 700 mm x 700 mm.
With 2 pistons of 560 mm.
It has elect... |
|
|
 |
Brand: Alfa, Amandus Kahl, APV, Gaulin, GEA, Kroma, Niro Soavi, Serac, Star Systems, Strassburger Filter
Mixing tank lines from 500 L to 2000 L in 316 stainless steel with Turbon Mixer mixers and Metler Toledo weighing cells.
Mixing line with heated reactor tanks in 316 stainless steel.
Composed of tanks ranging in volume from 500 L to 2000 L.
... |
|
|
 |
Brand: Fácil System
H-type rotary hydraulic press.
Manufacturer | brand: Fácil System Industria e Comercio de Máquinas e Equipamentos.
With approximate capacity: up to 60 tons.
With a rotating table with four work stations:
Control and placement of molds;
... |
|
|
 |
Brand: Jomar
Components: Allen-Bradley
Blow molding machine for PE, PS, PP and HDPE bottles.
Manufacturer: Jomar.
Model: 85S.
Injection and blow molding.
Year of manufacture: 2010
Origin: USA.
With manual.
Standard features:
1) Fully proportional hydraulics.
2) Al... |
|
|
 |
Machine for candy to put in the bag
Mixer with two axles
complete line of Dairy
Tube
Packinghouse to 15 Kg
3-wire machine mechanical Stretcher screens with a maximum capacity of 40 cm, 4 x 4 Carousel machine
machine to make baby socks, ... |
|
|
 |
Brand: Himaco
Plastic injection molding machine for P.P.
Brand: Himaco.
Model: APTA ECO 250 WITH SERVO MOTOR.
Average production: 130,000 units per day.
Three-phase voltage 220 v.
Commanded by PLC.
Techmation.
Closing force from 250 tons to 28... |
|
|
 |
Brand: Metaltec
Polyurethane injection molding machine for the manufacture of diamond cables.
Brand: Metaltec.
Vertical hydraulic closure, guided by columns, horizontal injection through motor and hydraulic cylinders.
Security system comprising: automatic m... |
|
|
 |
Brand: Maqmundi, Mec bier, MMC TEC
Beer bottling equipment.
Composed of:
- Semi-automatic stainless steel beer keg washer and filler.
Approximate capacity: one keg in approximately 3 minutes.
Features:
· Stainless steel tank with heating element for alkaline solution fr... |
|
|
 |
Brand: Durma
CNC hydraulic punching machine for sheet metal.
Manufacturer | Brand: Durma.
Model: TP9.
Approximate pressure capacity: up to 22 tons.
For sheet metal thicknesses:
Carbon steel and aluminum sheets: up to 6.35 mm.
Stainless steel she... |
|
|
 |
Brand: Tianhe
Continuous hydraulic torque machine.
Manufacturer: TIANHE OIL GROUP HUIFNEG PETROLEUM EQUIPMENT Co. Ltd.
Model: 2015.
Model: CZJQZ-II TYPE 360°.
Machine for applying torque to equipment, with a capacity of up to 112,000 lb-ft continuously... |
|
|
 |
Brand: TOKYOKOKI SEIZOSHO
Automatic universal equipment for tensile, bending, compression and other tests.
Load capacity: 30 tons.
Manufacturer | brand: TOKYOKOKI SEIZOSHO (JAPAN).
Equipment prepared for installation of load cells and digital test acquisition and man... |
|
|
 |
Brand: Scania
Stationary diesel engine with flame retardant pump.
Approximate capacity: 308 HP.
Manufacturer/brand: Scania.
Year of manufacture: no information.
Type: SM - 202 - 500.
Rotation: 1800 rpm.
2 units available.
Basically, the pump h... |
|
|
 |
Brand: Zegla
Pre-layer filter for removing insoluble solids suspended in liquid media.
Capacity: 10000 liters per hour.
Manufacturer/brand: Zegla.
Year of manufacture: 2000.
Stoppage time: 7 years. Operating time: 17 years.
The pre-cap filter opera... |
|
|
 |
All lines of the brand: long/mass cut Braibanti/nest/.
LPG line 1200/2500 Kg/h
Line Telles 600/1200 kg/h
Brasninho Line 350/500 Kg/h
homemade pasta Lines.
Tunnel GA
maintenance service.
Consultancy and technical assistance in the long... |
|
|
 |
Operates in 13 years will be dedicated to industrial services of maintenance, renovation and development of special equipment, focusing on quality in the services provided.
Services:
Fitness at NR12 standards.
Pneumatic friction brake adjustmen... |
|
|
 |
Components: ABB, Siemens
Industrial line for production of soft capsules (Softgel) used in pharmaceutical, nutraceutical, cosmetic, veterinary and food industries.
Equipment designed for encapsulation of liquids, vitamins, dietary supplements, nutraceutical oils, natural ... |
|
|
 |
Brand: Precisão Inox
Hydraulic sausage stuffer with 2 nozzles, made of stainless steel, for meat processing plants.
Manufacturer | Brand: Precisão Inox.
Approximate capacity: 80 liters.
Year: 2019.... |
|
|
 |
Complete kitchen for malt production.
Composed of:
- 2-roller carbon steel malt mill.
Features:
• Approximate capacity: 700 kg/hour.
• With a 3 HP motor.
• Epoxy-painted metal structure for fixing the mill and with a bag holder for ... |
|
|
 |
Brand: FBR ELPO
Automatic aseptic filling machine.
Manufacturer | Brand: FBR ELPO. (Italy)
Model: RIEMPITRICE ASETTICA.
Type: ASI 1000/2.
Approximate productivity: 6,000 liters per hour.
Year of manufacture: 2001.
Intermittent operation: 15 years.
... |
|
|
 |
Brand: Farex
Hydraulic pipe bending machine with 3 axes and electronic monitoring by CNC.
Manufacturer: Farex.
Model: CTA 2002 5 CNC.
Year: 2015.
Pipe bending machine with 3 electronically monitored axes. Equipped with a CNC control system (Computeriz... |
|
|
 |
Brand: RM Máquinas
Hydraulic press.
- Brand: RM Machines.
- Equipment for high productivity, has automatic drawer exchange.
- Cycle adjustment from 10 seconds until required time.
- Operation with two molds per cycle.
- Cylinder size: 500 mm.
- Pressu... |
|
|
 |
Hydraulic press for the manufacture of rubber products.
Pressure capacity: 250 tons.
5 Plates with dimensions 700 x 600.
Piston with 400 mm.
Working pressure: 250 Kg / cm².... |
