|
|
 |
Brand: Clearing
Industrial plate press.
Brand: Clearing.
Capacity: 1650.
Production: 5 - 16 hits.
Table board: 300.... |
|
|
 |
Brand: ACG, Almapal, Pam
Components: Hindustan, Siemens
Vacuum ACG Pam for tablet press encapsulation.
Brand: ACG Pam.
Engine: 3.0 HP.
R.P.M: 3450.
Frequency: 60 Hz.
Components:
Hindustan Engine.
3TW42 Siemens Encapsulated Starter Magnetic Switch.... |
|
|
 |
NAW rotary press.
Ability to manufacture 200 paçocas per minute.... |
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Brand: Sorg
Guillotine press for cutting sheet metal.
Manufacturer: Sorg.
Model: SGH 47 / 30.... |
|
|
 |
Semi-automatic paçoca cork press.
Approximate production: up to 200 units per minute.
With two ways and output channels for feeding the packaging machine.
Hole diameter: 30 mm.
Height: adjustable.
1.5 HP engine and 1700 rpm.
Voltag... |
|
|
 |
Hydraulic press.
Manufacturer: Hidrodynamic Machines.
Type: HD 40.
Year: 1997.
Stroke: 400 mm.
Strength: 40 tons.
Maximum Pressure: 180kg / cm2.
Engine: 30 hp.... |
|
|
 |
Wafer sheet forming and assembly machine and wafer sheet press.
Cylinder press to adjust the height and thickness of the wafer sheets.
First, the block is formed with wafer sheets, and then the block is pressed by the cylinder to adjust the hei... |
|
|
 |
Table with two tubs of approximately 100 liters.
With sliding piston system to extract juices.... |
|
|
 |
Stamping set for hard candies.
Model: IMD.... |
|
|
 |
Brand: Star Systems
Stainless steel filter press with 45 plates.
Manufacturer: Star Systems.
Model: 50-18A/SS/RO.... |
|
|
 |
Brand: Strassburger Filter
Stainless steel 316 filter press.
Manufacturer: Strassburger Filter.
Number of plates: 70 plates.
Model: SF 600.00 / 180 S
Plate diameter: 600 mm.
Capacity (filtration volume): 555 liters
Weight: 2.542 kg.
Used in a beverage proc... |
|
|
 |
Brand: LANZHOU LIMAC
Vertical soap stamping press.
Manufacturer | Brand: LANZHOU LIMAC INDUSTRIAL MACHINNERY CO. LTDA.
Model: 2000ES-MFS-6 Vertical Stamper with Freezing Dies.
Year of manufacture: 2011.
For pressing and molding soaps.
Approximate speed:
... |
|
|
 |
Brand: Neuberger
Components: Siemens, WEG
Rotary tablet press for compressing tablets and pills.
For 13 mm round tablets and 19 mm x 9 mm oblong tablets.
Manufacturer | Brand: Neuberger.
Model: MN-20F - 20 punches.
Approximate capacity: 400 to 900 tablets per minute.
Machine p... |
|
|
 |
Brand: Miller
Offset printing press.
Manufacturer | Brand: Miller.
Model: TP104/6.
Format: 74 x 104 cm, 6 colors with 2 reversals (6x0 - 4x2 - 5x1).
With non-stop infrared powder drying.
High stack, input and output, 6 Bawduin refrigerators, adjustm... |
|
|
 |
Brand: MONKEY
Rubber vulcanization press 700 x 500 mm.
Manufacturer | Brand: MONKEY.
Plate dimensions: 700 mm x 500 mm.
250 mm piston.
Has 3 slots.
Year: 1990.
For manufacturing rubber parts through vulcanization.
With 5 HP WEG motor.
Volta... |
|
|
 |
Brand: Braslaer, Toshiro
- Dough mixer with compacting press.
Manufacturer | Brand: Toshiro.
Approximate capacity: 50 kg of flour.
For homogenizing sheets of pasta, lasagna, and tagliatelle, among others.
- 7-roll cylinder with a width of 500 mm.
Manufacturer ... |
|
|
 |
Brand: Claumaq
Hydraulic press for bar soaps.
Manufacturer | brand: Claumaq.
Model: 001/2022.
Approximate capacity: up to 800 units per hour.
Manufactured in: 2022.
Equipment stopped since 2023.
For pressing bar soaps.... |
|
|
 |
Brand: Fácil System
H-type rotary hydraulic press.
Manufacturer | brand: Fácil System Industria e Comercio de Máquinas e Equipamentos.
With approximate capacity: up to 60 tons.
With a rotating table with four work stations:
Control and placement of molds;
... |
|
|
 |
H-type hydraulic press with two operating fronts and independent controls.
For compaction with automatic feeding silo.
Model: PHH100T.
Dough feeding, pressing and vertical and horizontal detachers.
Approximate capacity: 100 tons.
Dough... |
|
|
 |
Brand: SFOGGIAtech
Stainless steel filter press with 20 plates 40 x 40 S.
Manufacturer / brand: SFOGGIAtech SRL.
Year: 2012.
It was only in operation for a few days and has been in storage since then.
For filtering mineral insulating oil, but it can filter ... |
|
|
 |
Brand: Fima
Extruder press for short and long pasta.
Manufacturer: Fima.
Approximate capacity: up to 150 kg / hour.... |
|
|
 |
Brand: Braibanti
Extruder press for short dough and long dough.
Manufacturer: Braibanti.
Approximate capacity: up to 250 kg / hour.... |
|
|
 |
Brand: Pan Stone
Double vacuum hydraulic press for rubber vulcanization.
Manufacturer: Pan Stone.
Model: P-V-500-A-2-PCD.
Approximate capacity: up to 500 tons.
Year: 2007.
It has 4 plates of 700 mm x 700 mm.
With 2 pistons of 560 mm.
It has elect... |
|
|
 |
Brand: Mebusa
Hydraulic press.
Manufacturer: Mebusa.
Model: 30 - 12 - A.
Type: ascending hydraulic press.
Bending pressure: 30 tons.
Bending length: 1200 mm.
Open height: 300 mm.
Stroke length: 100 mm.
Throat depth: 200 mm.
Machine heigh... |
|
|
 |
Brand: Jones
Press Jones and conveyor belts... |
|
|
 |
Brand: G.Mazzoni, Jones, KHS, Mazzoni, Mazzoni LB
Sigma mixer, calender, extrusion and soap press.
Estimated production capacity: between 900 kg / h * up to 1,000 kg / h **.
Machines for the manufacture of soap composed of:
Sigma mixer for soaps.
Brand: G.Mazzoni.
Yield: 175 kg of bas... |
|
|
 |
Semi automatic baler for SOAP (without mold).... |
|
|
 |
Brand: Poreba
Torno.
Brand: Poreba.... |
|
|
 |
Brand: Nardini
Lathe.
Brand: Nardini.
Model: NDT-650 Nodus.
Dimensions: 2.90 m of bus.... |
|
|
 |
Tacho inox.
Capacity: 2000 l.
Tacho inox.
Capacity: 660 l.
Tacho inox.
Capacity: 200 l.... |
|
|
 |
Brand: Tonanni
Planer table.
Brand Name: Tonanni.
Table 4.10 m x 1.40 m.
6 m long rail.
Height 1.80 m.... |
|
|
 |
Installers of air conditioning/production of ducts.
Production: bending and performs the functions with plates up to 1.5 mm.
year: 2014.
Model: Triplex (TDC flange, hip and clip).
In great condition used only 30 days of use for calibration.
... |
|
|
 |
Brand: ROMI
CNC lathe Galaxy 10 Romi.
Year: 2002.
Fanuc 21I command.
Chip carrier.
Pistol washing.
12 Tower positions supported by tools.
Machine working 100%.... |
|
|
 |
Brand: Nomura
Mechanical guillotine mark Nomura, cutting capacity-mild steel 55 mm, length 1200 mm cutting useful motor power 55 kw, knife length 1830 mm, weight 45 tonnes... |
|
|
 |
|
|
|
 |
Brand: Oxipira
- Plasma cutting machine.
- Brand: Oxipira.
- Equipment year: 2015.
- Machine purchased and never used.... |
|
|
 |
Brand: Stankoimport
About Paral·lel the 3 guide stankoimport (kramatorsk) 1a665
year: 1984
height: 850 mm point
distance between centers: 16000 mm
max on bench: 1600 mm
max in motion: 1250 mm
pallet width: 1850 mm
flow between the tips: 40 ton
spindle mo... |
|
|
 |
01-03 ton press (green)
-01 03 ton press (green) c/bookmark
-preensa 01 of 04 ton (Brown)
-01 08 ton press (green)
-01 08 ton press (green)
-01 nylon roller machine p/cutting torch parts
-01 p/calender tracking parts and or materials
to... |
|
|
 |
Around
CNC Machine 195II year 2004 model Nardini logic
tyre, * point with k12k *
electric Tower 8 positions
pneumatic Plate diam 8 k12k autoblok of * *
MCS Command
... |
|
|
 |
Brand: Maho
MARK MAHO MH MODEL 600E with CNC432 COMMAND and COLOR VIDEO GRAPHIC CONNECTION 24V for 22 tools, NP 48588, IS0 40. ... |
|
|
 |
Brand: ROMI
Components: Siemens
Machine: Discovery 560
Manufacturer: ROMI
command: SIEMENS
main Motor: 9.3 KW
power: * k12k 20KVA * year of manufacture: 2005
tree Cone: ISO 40
RPM: 7500
course in "Z": 508
fast forward (X/Y/Z): 30 m/min
courses (X/Y/Z): 560 X 406 X... |
|
|
 |
Brand: ROMI
CNC lathe Romi Centur 30 D Multiplic.
Year: 2007.
Control: Fanuc.
Electric Tower 8 positions.
Among tips: 1,000 mm.
Against pneumatic point.... |
|
|
 |
Brand: Mazak
Horizontal lathe.
Brand: Mazak.
Model: Mazak Quick Turn Smart 350.
Year: 2015.... |
|
|
 |
2 thermal hydraulic presses for rubber
3 500 x 500 3 Dishes go 2 1/2 column 250 mm piston resistance heating
3 500 x 400 3 Dishes go 2 column "150 mm piston oil heating
500 mm Working Area (both)... |
|
|
 |
Brand: Nardini
Lathe.
Brand: Nardini.
Model: MS-350.
Dimensions: 1.50 m of busbar.... |
|
|
 |
Brand: Fabrima
Tablet blender.
Brand Name: Fabrima.
Model: M301-PP3402.
Year: 2004.... |
|
|
 |
Machine for production of steel wool.... |
|
|
 |
Brand: Vitoria
-Milling machine Brand Vitoria, with cambio, Motor and 2 heads (horizontal and vertical Machining) Splitter and dividers, and some records of milling cutter and endmill.
presses Rocker type with screw will free from 650 mm
-Type Body with fiber p... |
|
|
 |
Brand: ROMI
CNC lathe
brand name: Romi Centur k12k * model: * 30 D
Command
year 9 Mach 2004.
With electric Tower 8 positions.... |
