|
|
 |
Professional with more than 15 years of experience in chemical industry regulations and systems.
It has a company of industrial, environmental, certifications and NBR Standards.
PROFESSIONAL SUMMARY
Professional with vast experience in Managem... |
|
|
 |
Brand: Fabrima, Masipack
Stainless steel filling machine for plastic tubes.
Manufacturer: Fabrima.
Model: EBF 100.
For the manufacturer's catalog click here
... |
|
|
 |
Brand: Grabe
Industrial plastic tank made of PP polypropylene polymer.
Manufacturer | Brand: Grabe.
Approximate capacity: 2,000 liters.
Approximate tank body measurements:
Height: 175 cm.
Diameter: 127 cm.
Mobile tank with wheels.... |
|
|
 |
Brand: Grabe
Industrial plastic tank made of PP polypropylene polymer.
Manufacturer | Brand: Grabe.
Approximate capacity: 2,000 liters.
Mobile tank with wheels.... |
|
|
 |
Brand: Grabe
Plastic tank made of polyethylene PP polymer.
Brand: Grabe.
Approximate capacity: 1,000 liters.
Approximate tank body measurements:
Height: 180 cm.
Diameter: 110 cm.
Mobile tank with wheels.... |
|
|
 |
Brand: Grabe
Cylindrical plastic tank made from PP polypropylene polymer.
Manufacturer | Brand: Grabe.
Mobile tank with wheels.
Approximate measurements:
Approximate capacity: 2,000 L.
Approximate tank body measurements:
Height: 175 cm.
Diame... |
|
|
 |
Components: Eberle, Siemens
Rewinder unwinder for labels, packaging and plastic films on reels.
Stainless steel equipment.
With control panel.
Components: Eberle engine.
Frequency inverter: Siemens.... |
|
|
 |
Screw capping machine for aluminum (pilfer cap) or plastic caps
Manufacturer/Model: DC-50.
Capacity: 800 bottles/hour.
Bottle height: 70-330 mm.
Closing range: Φ25-35 mm.
Power: 0.25 kW.
Voltage: 220 V/60 Hz.
Weight: 55 kg.
... |
|
|
 |
Brand: Himaco
Plastic injection molding machine for P.P.
Brand: Himaco.
Model: APTA ECO 250 WITH SERVO MOTOR.
Average production: 130,000 units per day.
Three-phase voltage 220 v.
Commanded by PLC.
Techmation.
Closing force from 250 tons to 28... |
|
|
 |
Semi-automatic sealer for plastic film for pots.
Chinese cup sealer.
Brand: Cup Sealer Machine.
Pot diameter: 95 mm.
Voltage: 220 V single phase.... |
|
|
 |
Plastic injection mold set.
For ABS, polystyrene or polypropylene.
For: paper towel dispensers, toilet roll and intercalated toilet, soap dish and paper towel coil towel rack.
Average cycle of 45 seconds.... |
|
|
 |
Brand: Maqmundi
Rotary sealer and capper for plastic jars.
Manufacturer | Brand: Maqmundi.
Approximate capacity: up to 1,200 jars per hour.
For 100 mm and 120 mm jars.
Sealer with aluminum seal and plastic lids.
I was working sealing and capping jars ... |
|
|
 |
PP plastic injection mold for a gas station toy.
Plastic toy mold for injection molding.
Quantity: 2 units.
Mold dimensions: 235 x 349 x 350 mm.
Injection cycle: 20 seconds.
Productive molds manufactured in Joinville, SC.
Both molds... |
|
|
 |
Brand: Sinitron
Plastic injection molding machine.
Manufacturer | Brand: Sinitron.
Model: SYA-1300 DT.
Force: 130 tons.
Capacity: 315 cm³.
Year: 2006.
3 years in operation.
For flexible PVC products, ear protector cushions, and others.
Meetin... |
|
|
 |
Brand: Sandretto Lógica
Plastic injection molding machine for injectable parts.
Manufacturer | Brand: Sandretto Lógica.
Model: 770/220.
Capacity: 220 tons.
Year: 2004.
Still operating occasionally.
Averaging 90% of planned performance.... |
|
|
 |
Dryer and dehumidifier for plastic granules such as PP.
Manufacturer / brand: Siccus.
Model: Compacta plus.
Approximate capacity: 100 to 150 kg per hour.
The raw material such as plastic enters the machine, which dries and dehumidifies th... |
|
|
 |
Line comes with:
Mills.
90 mm extruder.
Automatic feeder.
Heater.
3 m bathtubs.
Roll granulator.
Cooling tower.... |
|
|
 |
Brand: Sagec
Granulation line extruder.
- Extruder with screw conveyor.
Thread: 90 mm L/D 31.
Engine: 50 hp.
- Water bathtub: 5 meters.
- 3 hp water pump.
- Granulator.
Manufacturer: Sagec.
Model: 300.
- 20 hp mixing agglutinator.
Ap... |
|
|
 |
Plastic injection molds.
3 units.
With 1 cavity.
Year: 2016.
Molds were developed to produce charging stations for smartphones and cell phones.
It consists of 3 lockers with to place locks.
Front cabinet.
Cavity back cover.
Lo... |
|
|
 |
Molds for injection of plastic boxes.
Steel 1100 temperadora.
A cavity.
Approximate weight: 1,500 kg.
Measures:
Width: 625 mm.
Length: 895 mm.
Total height (closed): 362 mm.... |
|
|
 |
Professional in the area of plastic.
Consultant for project development, processes, cost reduction in terms and processes.
25 years of experience in processing industries and product development lab:
-PVC.
-Term engineering plastics.
-Polyo... |
|
|
 |
Coextrusora to make plastic bags with double or triple layer of two different materials.... |
|
|
 |
Brand: Brasholanda
Aluminum seal sealer for plastic pots.... |
|
|
 |
Drageadeira with internal plastic coating... |
|
|
 |
Mooney viscometer for measuring the Mooney viscosity of rubbers and plastics.
Manufacturer: Tecnologia Industrial.
Model: VM - 2003.
Year: 2003.
Origin: Argentina.
The Mooney viscometer is an instrument used to measure the Mooney visco... |
|
|
 |
Brand: Miotto
Brand mixer Miotto.
Mixture composed of rigid PVC or flexible capacity 200 kg/hour.
-30 HP Engine.... |
|
|
 |
Brand: Nissei
Injector/PET preform mold with injection 4 and 20.
Brand Name: NISSEI ASB.
Model: PF6-2B.
Year: 1997.
Productivity: 1200 to 1600 g/h
in the production of PET bottles of 100 ml to 2000 ml (soft drinks, wines, brandy, vinegar and others).
F... |
|
|
 |
Brand: Battenfeld
Industrial plastic injection molding machine.
Brand: Battenfeld.
Capacity: 2000g to 500 tons.
Year: 1981.... |
|
|
 |
Brand: Mecanica Oriente
East 60/100 injection pump
dual digital control ... |
|
|
 |
Brand: Saip
Hard Polyurethane injection machine
k12k * High. * model:
SRL Saip Cabiate (COMO) K60-ES
N° de serie: Italian 375... |
|
|
 |
Brand: Mecanica Oriente
Plastic injection Orient.
Model: IHP 140/250.
Capacity: 250 cm ³.
Year: 1986.
Panel: MCPII.... |
|
|
 |
Injection.... |
|
|
 |
Complete industry for manufacture of thermoplastic polymers, resulting in acrylic beads made by injection moulding/extrusion.
The industry has excellent automated production line, allowing it to be produced 400 tons per month of granular acrylic,... |
|
|
 |
Plastic injection molding machine.
Model: JM 268.... |
|
|
 |
Brand: Sulpol
Poliutretano injection of Sulpol, model ST-rise of 15 with P15A Kg/min... |
|
|
 |
Brand: Fibermaq
Low pressure polyurethane injection.
Manufacturer: Fibermaq.
model: PUF 7 Basic.
voltage: 220 v.
air Consumption: 20/80 PSI PCM.
Power Consumption: 4431 Watts.
applications:
:
low density rigid foams.
flexible foams.
integral skin... |
|
|
 |
Large industrial plastic injection molding machine.... |
