|
|
|
| Plastic injection mold set |
|
Plastic injection mold set.
For ABS, polystyrene or polypropylene.
For: paper towel dispensers, toilet roll and intercalated toilet, soap dish and paper towel coil towel rack.
Average cycle of 45 seconds. |
|
|
|
|
|
|
|
Photos and images sent by email will be considered as ad authorization on our websites and marketing.
Camargo Industrial has no responsability for the data delivered by the advertiser, (Operation, technical, maintenance, warranties, technical delivery) and registration of the same data, exempting Camargo Industrial responsibilities on the veracity of the information described, civil and criminally.
The advertiser declares that the equipment is their property, settled without alienation, pending fiscal or judicial attachment.
Standard Work Safety of Machines and Equipment (NR12): 12.1.1. Camargo Industrial does not participate in the use phase construction, transport, assembly, installation, adjustment, operation, cleaning, maintenance, inspection, decommissioning and dismantling of machinery or equipment, any such liability of the seller attributes and / or buyer, relieving - any responsibility Camargo Industrial.
Others suggested equipment for you:
|
|
 |
Brand: Incal
Coated tank for baking and processing of chocolate, creams and sweets.
Brand: Incal.
Model: JAA 22.
Material of equipment: Stainless steel.
Working Pressure: 150 LBS / Pol².
Capacity: 200 liters.
Voltage: 220 three-phase.
Compone... |
|
|
 |
Brand: Hebleimar
Chocolate tray.
- Brand: Hebleimar.
- Model: HCH - 600.
- Voltage: 220V Three-phase;
- Components: 03 motors with respective powers: 2.1 KW, 1,5 KW, and
0.5 KW.
- Equipment characteristics: It has speed adjustment of the belt and t... |
|
|
 |
Brand: Bray Controls, Flow Tec
- Flow control system.
- Double acting pneumatic actuator.
- Brand: Bray Controls.
- Maximum pressure: 140 psi.
- ISO 5211/1 compliance.
- Valve with ball ring.
- Brand: Flow Tec.
- Model: Flow-Tek F-15 4 "CF8M.
- Stainless st... |
|
|
 |
Brand: Infinity
- Energy stabilizer.
- Brand: Infinity 20 kva
- Power: 20 kva.... |
|
|
 |
Brand: Trox Technik
Laminar flow cabin.
Brand name: Trox Technik.
Interior of the equipment in stainless steel.
Series: FLH.... |
|
|
 |
Ribbon Blender stainless steel
Brand: Uniâo Caldeiraria.
Stainless steel machine.
With equipment support.
It has cover with holder and security sensor.
With panel, motor and reducer.... |
|
|
 |
Brand: Alfa Laval
Alfa Laval sanitary transfer pump
- Pontecia: 7.5 hp - 3 phases.
- Voltage: 220/380 V.
- A 19.1 / 11.1
- Hz 60
- 3,500 rpm... |
|
|
 |
Brand: Berliner Luft
- Exhaust fan, ventilation unit with double exhaust fan.
- Brand: Berliner Luft.
- Series: BBT.
- Model: BBT 160.
- Quantity: One unit.
- Excellent condition.
Cli... |
|
|
 |
Brand: Refrisat
- Cold water unit of the soap line.
- Coolant: R 22.
- Condenser flow: 5.85 m 3 / h.
- Brand: Refrisat.
- Model: 22 W - ST... |
|
|
 |
Brand: Implantação Engmaq
Stainless steel tank with serpentine.
Brand: Implantation Engmaq.
Capacity: 35 liters.
Area: 0,30 m2.
Pressure Design: Side / Serpentine - 3/5 Bar / man.
Design temperature: Side / Serpentine - 80/80 C.
Operating pressure: Side / Se... |
|
|
 |
Coater in stainless steel tablets.
Type: Drageadeira.
With retractable head.
For approximately 150 L.
With two spray coating.... |
|
|
 |
Brand: Hebleimar
Hebleimar stainless steel knife / knife roller
- Brand: Hebleimar
- Material: Stainless steel
- Voltage: 220 V three-phase
- Components: 1 engine generating 7.2 KW of power
- General characteristics: Spacing between 30 mm rotary knives... |
|
|
 |
Brand: MGA
- Split ball valve.
- Brand: MGA (Metallurgical Golden Arts).
- Double acting pneumatic actuator.
- Brand: Bray Controls.
- Maximum pressure: 140 psi.
- ISO 5211/1 compliance.
- Valve with ball ring.... |
|
|
 |
Brand: Promaler
Intermittent rotary cellofanching machine.
Brand: Promaler.
Prepared to operate fully closed cartridges.
Tape application with the following dimensions: 36 mm wide x 15 mm deep x 67 mm high.
Machine can be formatted for cigarettes, haysta... |
|
|
 |
Brand: Hebleimar
Industrial cooling tunnel for chocolate, biscuit and sweets.
Length of 12 meters with 01 station.
Width: 600 mm.
Brand: Hebleimar.... |
|
|
 |
Brand: Baker Perkins
Cobrideira for chocolate.
Brand: Baker Perkins.
Composed by:
-Transfer pump.
-Heating System.
-Chocolate curtain.
-Ventilation to remove excess.
-Input and output table 400 mm.
Measures: 1.20 x width x length 1.65 1.70... |
|
|
 |
Brand: Hebleimar
Extruder for cereal dough, sweets and consistent product.
- Brand: Hebleimar;
- Model: HEX - 400.
- Material: Stainless steel.
- Voltage: 220 V Three-phase.
- Components: 1 engine of 3.7 KW of power.
- General characteristics: It ha... |
|
|
 |
Brand: Hebleimar
Automatic horizontal knife guillotine
Components: 02 motors generating 1.5 KW of power;
General characteristics: It has cutting adjustment of 80 to 100 mm.
It is part of an industrial line for the manufacture of cereal bars.... |
|
|
 |
Brand: Polienva Movitron
- Pneumatic dosing machine.
- Stainless steel.
- Brand: Polienva Movitron.... |
|
|
 |
Brand: Indumak
Components: Atos, Festo, Siemens, WEG
Vertical powder packer with helical dosing system
Brand: Indumak.
Model: MG 8000.
With thread, dosing system and format.
With panel.
System of vision Acts series interactive.
Inverters Weg CFW 08.
CLP Atos MPC 4004.
Servo driv... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Photos and images sent by email will be considered as ad authorization on our websites and marketing.
Camargo Industrial has no responsability for the data delivered by the advertiser, (Operation, technical, maintenance, warranties, technical delivery) and registration of the same data, exempting Camargo Industrial responsibilities on the veracity of the information described, civil and criminally.
The advertiser declares that the equipment is their property, settled without alienation, pending fiscal or judicial attachment.
Standard Work Safety of Machines and Equipment (NR12): 12.1.1. Camargo Industrial does not participate in the use phase construction, transport, assembly, installation, adjustment, operation, cleaning, maintenance, inspection, decommissioning and dismantling of machinery or equipment, any such liability of the seller attributes and / or buyer, relieving - any responsibility Camargo Industrial.
|
 |
| |
|
Plastic injection mold set
