|
|
 |
Brand: Prodismaq
- Packing machine for special products.
- Complete equipment built in stainless steel.
- It has 10 dispensing nozzles.
- The equipment was built as a special design, to pack flexible products that need support for conveyor belt, such as seru... |
|
|
 |
Brand: Cariba
Components: Allen-Bradley, Atos, Nordson
Cartridge for large cartridges.
Brand: Cariba, Italy, Bologna.
Model: PHB 225.
With counting system, stacking of maganize sachets and feeding.
Only the cartridge without feeding system can be supplied.
For clean / hygienic line, regula... |
|
|
 |
Brand: Indumak
Line for mixing and packing with ribbon blender and Indumak floor:
-Packer/trademark Indumak package.
Model: MG1000. Excellent state of conservation. Packing type solder pad and FP 1000 feeder of Indumak, for the dosing of powders and c... |
|
|
 |
Conveyor screw Stainless steel
- 5 meters long. Measures:
- Diameter: 200 mm.
- Space between fins: 120 mm.
- Shaft diameter: 100 mm.
- Engine: 7.5 hp 1715 rpm.
- With motor and reducer.... |
|
|
 |
Brand: Emil
Automatic soft belly filling.
It was used to fill milk.
The current type of film is flexible, known as "soft belly".
Brand: Emil.
Model: EI
Maximum estimated capacity: 1000 packages / hour all in stainless steel, may vary according to ... |
|
|
 |
Brand: Polienva Movitron
- Pneumatic dosing machine.
- Stainless steel.
- Brand: Polienva Movitron.... |
|
|
 |
Brand: Serpack
Components: Festo
Filling continues Stand Up Pouch stainless. Brand Name: Serpack. Model: SPK 200. For filling: Olives, meatballs and other. Presentation of the package: Sache Stand Up Pouch. Yield: 35 ppm. Supply voltage: 220 V-60 Hz 3 F pneumatic syste... |
|
|
 |
Brand: Mesal
Filling machine 10 nozzles for wax grease high viscosity.
Brand: Mesal.
Model: MEC 500/10.
Year: 2002.
Worked with domestic wax packaging.
With 10 nozzles, individual cylinder per nozzle.
With electric panel.
Production: 5,000 bo... |
|
|
 |
Brand: Promáquina
Components: CompAir, Danfoss, Nivetec, NTG, Starnox, WEG
- Complete packaging for pharmaceutical industry.
- Machine built in stainless steel.
- To pack medicine with droppers and cap.
- Complete system for:
- Feed the liquid, with lung tank and agitator to avoid decantation.
- Pump for the ... |
|
|
 |
Brand: Amard
- Lineariser with 6 nozzles.
- Machine built in stainless steel.
- Structure in good condition.
- Brand: Amard.... |
|
|
 |
Brand: Emzo
Filling machine.
Brand: Emzo.... |
|
|
 |
Ribbon Blender Mixer
- Conveyor thread attached.
- With reducer and motor.
Literature: Approximately 200 L.... |
|
|
 |
Brand: Tirelli
Labelling machine for bottles, Cologne and perfumes. Brand: Tirelli. Model: Delta. Year: 1999. Height: 2.00 m. Width: 1.80 meters. Length: 2.40 metres. Weight: approx. 300 kg.... |
|
|
 |
Brand: Donar, MVL
Components: WEG
With vibrating chute feeder for solid products.
Presence sensor for container packaging, moved by conveyor belt with talisca.
The equipment has two stainless steel silos, each silo has a scale/load cell and a CLP itself.
CLP brand GTA. ... |
|
|
 |
Brand: Martinez taboada
Rinsers of vials and flasks. Mrca: Martinez Taboada. Makes up to 30 ml. type Model. IFE 77. Year. 1979.
the machine was being used all the time, is in a State of preservation as the machines of the perfume line.... |
|
|
 |
Brand: Edward
Linear filling 6 stainless steel nozzles for:
Pasty and Liquid oils.
Filling machine can fill gel alcohol
2000 bottles Capacity/hour with 6 600 ml volumetric cylinder.
Pneumatic reservoir for 50 liters in stainless steel Mark Edwards.
... |
|
|
 |
Brand: Fabrima, Masipack
Components: WEG
Packer Fabrima manufacturer, model year 2008 ARV for packaging of powder with low fluidity, sugar, gelatin, grated cheeses, among others in flexible packaging.
features: package dimensions: 180 mm width for maximum length of 320 mm. -Feeder: Fe... |
|
|
 |
Brand: Nocelli, Serac
- Lineariser with 6 nozzles.
- Machine built in stainless steel.
- Structure in good condition.... |
|
|
 |
Brand: Martinez taboada
Rinsers of flasks.
Brand: Martinez Taboada.
Makes up to 30 ml.
type Model. IFE 77.
Year. 1979.... |
|
|
 |
Brand: Milainox
Filler dosing liquids in glasses, flasks and pots and semi pasty.
Brand: Milanox.
Model: M22.
Year: 2010
Approximate capacity: 2,000 cups per hour.... |
|
|
 |
Components: SEW-Eurodrive
- Capacity: 2,000 L.
- Made of stainless steel.
- With complete panel:
- Siemens Logo 230 RC.
- Siemens switches.
- Organized picture.
- Inverter Sew Eurodrive Movitrac LT.
- System and pneumatic key.
- The mixer has two caps,... |
|
|
 |
Brand: Martinez taboada
Filling machine for vials and flasks with stopper.
Brand: Martinez Taboada.
Model type: Ife 77.
Makes up to 30 ml.
Year: 1979.... |
|
|
 |
Brand: Posimat
Positioner from plastic bottles.
Brand: Posimat.
Model: Master-20.
Serial: 8764-MXI.
Uses all kind of bottles either light or heavy, cylindrical, oval or asymmetrical, with short necks or even without a neck, as covers plans elements ... |
|
|
 |
Brand: Mesal
Filling Machine.
Brand: Mesal .
Model: E30G2.
Approximate production: 9,000 bottles / hour.
500 ml PET bottle.... |
|
|
 |
Brand: LCB
Filling Large. automatic Rotary Filling mark LCB. filling nozzles 16. Manufactured in stainless steel AISI 304 vacuum System, suitable for glass containers or bottles. Packs any 1000 ml bottles to model. approximately 8000 bottles productio... |