|
|
 |
Brand: Himaco
Plastic injection molding machine for P.P.
Brand: Himaco.
Model: APTA ECO 250 WITH SERVO MOTOR.
Average production: 130,000 units per day.
Three-phase voltage 220 v.
Commanded by PLC.
Techmation.
Closing force from 250 tons to 28... |
|
|
 |
PP plastic injection mold for a gas station toy.
Plastic toy mold for injection molding.
Quantity: 2 units.
Mold dimensions: 235 x 349 x 350 mm.
Injection cycle: 20 seconds.
Productive molds manufactured in Joinville, SC.
Both molds... |
|
|
 |
Molds for injection of plastic boxes.
Steel 1100 temperadora.
A cavity.
Approximate weight: 1,500 kg.
Measures:
Width: 625 mm.
Length: 895 mm.
Total height (closed): 362 mm.... |
|
|
 |
njection mold for roulette toys.
Plastic toy mold for injection molding.
Injection cycle: 19 seconds.
Mold dimensions: 190 mm x 190 mm.
Quantity: 2 molds.
Injection molding of PS base and PS spinner for the roulette toy.
Both molds ... |
|
|
 |
Production line for batteries and plastic parts for cell phones of various brands and manufacturers.
Year of manufacture: 2018.
Injection molding machines for manufacturing plastic parts, batteries, ultrasonic welding, spot welding, pad printin... |
|
|
 |
Brand: Semeraro
Plastic injection molding machine.
Manufacturer | Brand: SEMERARO.
Model: 790/220.
Capacity: 220 tons.
It was used to make the thermoplastic lens for an outdoor wall light.
Year of Manufacture: 1998.... |
|
|
 |
Brand: Trane
Industrial chilled water bank chiller 650 TR with water condensation.
Manufacturer | Brand: Trane.
Model: CVGF650.
Refrigerant gas: HFC-134a.
Lubricating oil: Trane Oil 48.
Weight: 10,900 kg.
Year: 2005.
Approximate dimensions:
... |
|
|
 |
Brand: Sinitron
Plastic injection molding machine.
Manufacturer | Brand: Sinitron.
Model: SYA-1300 DT.
Force: 130 tons.
Capacity: 315 cm³.
Year: 2006.
3 years in operation.
For flexible PVC products, ear protector cushions, and others.
Meetin... |
|
|
 |
Brand: Sandretto Lógica
Plastic injection molding machine for injectable parts.
Manufacturer | Brand: Sandretto Lógica.
Model: 770/220.
Capacity: 220 tons.
Year: 2004.
Still operating occasionally.
Averaging 90% of planned performance.... |
|
|
 |
Dryer and dehumidifier for plastic granules such as PP.
Manufacturer / brand: Siccus.
Model: Compacta plus.
Approximate capacity: 100 to 150 kg per hour.
The raw material such as plastic enters the machine, which dries and dehumidifies th... |
|
|
 |
Plastic injection molds.
3 units.
With 1 cavity.
Year: 2016.
Molds were developed to produce charging stations for smartphones and cell phones.
It consists of 3 lockers with to place locks.
Front cabinet.
Cavity back cover.
Lo... |
|
|
 |
Complete industry for manufacture of thermoplastic polymers, resulting in acrylic beads made by injection moulding/extrusion.
The industry has excellent automated production line, allowing it to be produced 400 tons per month of granular acrylic,... |
|
|
 |
Cap molds with side glasses.
We are putting on sale the molds the brand Zé da Graça, containing as main product, side glasses plastic cap (where one can consume the liquid contained in them through straws).
-Cap molding.
Plastic injection mou... |
|
|
 |
Mold for injection of plastic box.
Molded steel 1100 tempered.
With 1 cavity.
Estimated weight: 1,500 kg.
Measures:
Width 625 mm.
Length 895 mm.
Total height (closed): 362 mm.... |
|
|
 |
Mold for injection of plastic boxes.
Steel mold 1100 temperadora with 1 cavity.
Width: 625 mm.
Length: 895 mm.
Total height closed: 362 mm.... |
|
|
 |
Mold for injection of plastic doors.
1100 tempered steel.
Approximate weight: 1,000 kg.
Measures:
Width: 970 mm.
Length: 1150 mm.
Height: 250 mm.... |
|
|
 |
Mold for injection of plastic spoons.
With 24 cavities.
Spoon of dessert.
Cycle: 9.0 seconds.
For central nozzle injection.... |
|
|
 |
Mold for injection of plastic bucket with 20 liters.
1100 tempered steel.
With a cavity.
Approximate weight: 800 kg.
Measurements bucket body mold:
Length 600 mm.
Radius: 510 mm.
Measures mold bucket cap:
Length 300 mm.
Rad... |
|
|
 |
Brand: Nissei
Injector/PET preform mold with injection 4 and 20.
Brand Name: NISSEI ASB.
Model: PF6-2B.
Year: 1997.
Productivity: 1200 to 1600 g/h
in the production of PET bottles of 100 ml to 2000 ml (soft drinks, wines, brandy, vinegar and others).
F... |
|
|
 |
Mold for injection of plastic parts.
To mold plastic boxes of universal use.... |
|
|
 |
Bottle injection mold 330 ml.
In steel 1100 temperadora, 1 cavity.
Approximate weight: 2,500 kg.
Width: 880 mm.
Length: 995 mm.
Open height: Male 350 mm and female 540 mm.
Mold for plastic box of general use: packing of liquids, tra... |
|
|
 |
Brand: Bras Injet
Double table plastic injection molding machine.
Brand: Bras Injet.
Model: 150 800.
Year: 2006.
Formatted to inject 600 grams at a time.... |
|
|
 |
Mold for injection of plastics.
With two cavities.
Year: 2015.
Dimensions: 15 cm x 15 cm.
For two nozzles.
Cycle: 6.1 seconds.... |
|
|
 |
Brand: Battenfeld
Injection molding machine.
For 180 ton.
For 1.5 kg of injection.
With new CLP, reformed machine.
Speed: 55 cycles / h.... |
|
|
 |
Brand: Mom
Small plastic injection molding machine.
Brand: Mom.... |
|
|
 |
Brand: Biasinox
- Tank with a maximum capacity of 1000 liters.
- Brand: Biasinox.
- Dimensions:
- 2.00 m high.
- 1,10 m in diameter
- 0.70 m stand (feet).
- Material stainless steel 316
- With tapered bottom.
- Output of the lower part.... |
|
|
 |
Brand: Delbras
- No Break.
- Brand: Delbras.
- Model: PHD.
- Power: 06 KVA.
- 220 V input.
- Output 110 V + 110 V.
- Frequency 60 Hz.... |
|
|
 |
Brand: Plumat
- Transfer pump in sanitary stainless steel.
- Brand: Plumat.
- Manufacture: German.
- q 7.8 m 3 / hr.
- 44.57 m.
- Power: 5.5 Kw - n 2,900 min.
- 2 m 2.... |
|
|
 |
Brand: Implantação Engmaq
Stainless steel tank with serpentine.
Brand: Implantation Engmaq.
Capacity: 35 liters.
Area: 0,30 m2.
Pressure Design: Side / Serpentine - 3/5 Bar / man.
Design temperature: Side / Serpentine - 80/80 C.
Operating pressure: Side / Se... |
|
|
 |
Brand: Narita
- BOPP labeling machine, fed balel / roll roll, for pet bottles and smaller bottles.
- Brand: Natira.
- Model: MZ 200.
- Year: 2007.
- For BOPP labels.
- Capacity for 150 bottles / minutes for current format.
- Maximum capacity: 200... |
|
|
 |
Ribbon Blender Mixer
- Conveyor thread attached.
- With reducer and motor.
Literature: Approximately 200 L.... |
|
|
 |
Brand: Alfa Laval
- Transfer pump in stainless steel.
Type Sol 10c2.
- B 190 mm.
- Brand: Alfa Laval.
... |
|
|
 |
Brand: Sei Park
- Automatic stretch palletizer.
- Brand: Sei Park... |
|
|
 |
Brand: WEG
Components: WEG
- Water pump.
- Pump with reducer and support for the propeller assembly.
- Serial Number: r17544.
- Model: C216F
RPM: 1725.
- WEG engine.
- Voltage 220 / 380v.... |
|
|
 |
Brand: Infinity
- Energy stabilizer.
- Brand: Infinity 20 kva
- Power: 20 kva.... |
|
|
 |
Brand: Incal
Blender Ribbon Blender stainless steel 400 L
- Brand: Incal.
- Model: JAA INC 400.
- Material: Stainless steel.
- Capacity: 400 liters.
- Voltage: 380 three-phase.
- Components: 1 engine with 11 kW of power.
- General characteris... |
|
|
 |
Brand: Rodrinox
- Tank with a maximum capacity of 1000 liters.
- Brand: Rodrinox.
- Dimensions:
- 2.00 m high.
- 1,00 m in diameter
- 0,50 m support (feet).
- Material stainless steel 316
- With tapered bottom.
- Output of the lower part.... |
|
|
 |
Brand: Indumak
Manufacturer-Indumak.
time-6 years.
average production-08 to 10 products per minute.
packages that used-10 kg/15 kg/25 kg.
bagged product-animal feed with density 350 g/l to 450 g/l
-
Description the packinghouse PG 25 is offered for hi... |
|
|
 |
Brand: Loma Systems
Metal detector with treadmill.
- Brand Name: Loma Systems.
- Model: IQ 2.
- Complete equipment.... |
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Brand: Hebleimar
Chocolate tray.
- Brand: Hebleimar.
- Model: HCH - 600.
- Voltage: 220V Three-phase;
- Components: 03 motors with respective powers: 2.1 KW, 1,5 KW, and
0.5 KW.
- Equipment characteristics: It has speed adjustment of the belt and t... |
|
|
 |
Ribbon Blender stainless steel
Brand: Uniâo Caldeiraria.
Stainless steel machine.
With equipment support.
It has cover with holder and security sensor.
With panel, motor and reducer.... |
|
|
 |
Brand: Promaler
Intermittent rotary cellofanching machine.
Brand: Promaler.
Prepared to operate fully closed cartridges.
Tape application with the following dimensions: 36 mm wide x 15 mm deep x 67 mm high.
Machine can be formatted for cigarettes, haysta... |
|
|
 |
Brand: Posimat
Positioner from plastic bottles.
Brand: Posimat.
Model: Master-20.
Serial: 8764-MXI.
Uses all kind of bottles either light or heavy, cylindrical, oval or asymmetrical, with short necks or even without a neck, as covers plans elements ... |
|
|
 |
Coater in stainless steel tablets.
Type: Drageadeira.
With retractable head.
For approximately 150 L.
With two spray coating.... |
|
|
 |
Brand: Alfa Laval
Alfa Laval sanitary transfer pump
- Pontecia: 7.5 hp - 3 phases.
- Voltage: 220/380 V.
- A 19.1 / 11.1
- Hz 60
- 3,500 rpm... |
|
|
 |
Stainless steel rolling mill cylinder
Material of equipment: Stainless steel.
Voltage: 220 V three-phase.
Components: 1 motor of 1,5 KW of power.
General characteristics: It has height and temperature adjustment.... |
|
|
 |
Brand: MGA
- Split ball valve.
- Brand: MGA (Metallurgical Golden Arts).
- Double acting pneumatic actuator.
- Brand: Bray Controls.
- Maximum pressure: 140 psi.
- ISO 5211/1 compliance.
- Valve with ball ring.... |
|
|
 |
Brand: Berliner Luft
- Exhaust fan, ventilation unit with double exhaust fan.
- Brand: Berliner Luft.
- Series: BBT.
- Model: BBT 160.
- Quantity: One unit.
- Excellent condition.
Cli... |
|
|
 |
Brand: Posimat
- Bottle positioning machine.
- Brand: Posimat.
- Model: Master 20.... |
