|
|
|
| Vögele asphalt leveling sensor case |
|
Leveling sensor kit for controlling screed height, layer thickness, and cross slope during paving.
Manufacturer | Brand: Vögele.
- Load cell/dynamometer.
- Cross slope sensor.
- Ultrasonic height sensor.
- Mechanical height sensor.
Also included is a Sauer-Danfoss CCC102 industrial machine vision camera and a Kratos GL-1kgf force device.
It is used in Vögele asphalt pavers, machines that receive the asphalt mix and distribute the material on the roadway. |
Brand:
Vögele
|
|
|
|
|
|
Other similar equipment for research results
:
|
|
 |
Brand: VEIGABOR
Stainless steel horizontal pressure vessel.
With thermal insulation and electric heating system.
Literature: 1180 L / 1.18 mł.
Size:
Dimensions of the entry: 1000 mm.
Depth: 1500 mm.
Heater resistors: 1200 W.
Regulated safety val... |
|
|
 |
Brand: Layout Industrial
Components: Barionkar
Vertical pressure vessel.
Brand: Industrial Layout (projects).
With Barionkar compressor.
Check valve.
Compressor mounted on top.... |
|
|
 |
Brand: Dwyer Instruments
Analog differential pressure gauges.
Manufacturer: Dwyer Instruments.
Type: Magnehelic®.
Distributor: HYGRO-THERM.
These instruments are used for measuring and visually indicating small pressure differences between two points, typically i... |
|
|
 |
Brand: RDS INOX
Jacketed pressure reactor for heating in 316L stainless steel.
Manufacturer: RDS (Inox Engenharia e Equipamentos).
Useful capacity: 200 Liters.
Year of Manufacture: 12/2022.
Features a pneumatic piston lid lifting system.
Equipment inc... |
|
|
 |
Brand: Grow-inox
Stainless steel 316L pressure reactor.
Manufacturer:
Capacity: 100 L.
With top agitation and bottom scrapers and turbo shear.
Skid mounted.
With control panel with speed control for the upper and lower motors, automatic lid elevator bu... |
|
|
 |
Stainless steel tank for drug formulation.
Process tank for formulating and mixing solutions, with agitation system and steam jacket/coil.
Design: Formulation Tank. Manufacturing date: February 2020.
Internal vessel volume: 200 liters.
Ve... |
|
|
 |
Brand: Sabroe
Components: WEG
Industrial chiller.
Manufacturer | Brand: Sabroe.
Year of manufacture: 1997.
Equipment has been serviced.
Uses Freon gas.
Equipped with a 100 HP 380 V WEG motor.
Heat exchanger / Condenser (Shell and Tube): Model CRKW 403012.
Com... |
|
|
 |
Microbrewery Beer Production Line
Manufacturer: CBB-Biomassa e Bioprocesso Ltda.
Equipment Manufacturing Year: 2024
Active Operating Time: 24 months
Capacity: 600 to 750 liters of ready-to-brew craft beer per month
Composed of: mill, s... |
|
|
 |
Brand: Dosaggio, Grupo Innovar, Luferco, Metalúrgica Mococa, SKYMSEN
Industrial factory/company for the manufacture of pet food.
Complete animal nutrition company.
Approximate capacity: 3 tons per day.
To produce natural food for dogs, cats, and pets.
With natural food ingredients in autoclaved packaging a... |
|
|
 |
Brand: Bausch Strobel
Stainless steel laminar flow unit for vial-based injectable production lines.
Manufacturer: Bausch + Ströbel.
Material: 316L stainless steel.
TECHNICAL SPECIFICATIONS:
Manufacturer: Bausch + Ströbel (Germany).
Model: DST 2247 (Durchlau... |
|
|
 |
Brand: Cosberg
Lot of 6 vibratory feeders in stainless steel and aluminum.
Manufacturer: Cosberg.
High-precision equipment, constructed of stainless steel with an aluminum profile structure. Lot Composition: 2 Large Units: High-capacity models for heavy-duty ... |
|
|
 |
Components: ABB, Siemens
Industrial line for production of soft capsules (Softgel) used in pharmaceutical, nutraceutical, cosmetic, veterinary and food industries.
Equipment designed for encapsulation of liquids, vitamins, dietary supplements, nutraceutical oils, natural ... |
|
|
 |
Complete kitchen for malt production.
Composed of:
- 2-roller carbon steel malt mill.
Features:
• Approximate capacity: 700 kg/hour.
• With a 3 HP motor.
• Epoxy-painted metal structure for fixing the mill and with a bag holder for ... |
|
|
 |
Brand: Jomar
Components: Allen-Bradley
Blow molding machine for PE, PS, PP and HDPE bottles.
Manufacturer: Jomar.
Model: 85S.
Injection and blow molding.
Year of manufacture: 2010
Origin: USA.
With manual.
Standard features:
1) Fully proportional hydraulics.
2) Al... |
|
|
 |
- Position: Pcp - Production Planning and Control (2005 to 2006)
- Position: QC - Quality Control (2006 to 2007)
- Position: Process Technician / CNC Programmer - Industrial Engineering (2007 to 2009)
- Position: Technician of Processes (Pro... |
Others suggested equipment for you:
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Brand: Sterling Sihi
- Pump, modular vacuum system.
- Brand: Sterling Sihi / Flowserve
- Model: PL 126 M 10 0A
- Complete technical description of equipment and manual:
| |
|
 |
Stainless steel rolling mill cylinder
Material of equipment: Stainless steel.
Voltage: 220 V three-phase.
Components: 1 motor of 1,5 KW of power.
General characteristics: It has height and temperature adjustment.... |
|
|
 |
Brand: MGA
- Split ball valve.
- Brand: MGA (Metallurgical Golden Arts).
- Double acting pneumatic actuator.
- Brand: Bray Controls.
- Maximum pressure: 140 psi.
- ISO 5211/1 compliance.
- Valve with ball ring.... |
|
|
 |
Brand: Infinity
- Energy stabilizer.
- Brand: Infinity 20 kva
- Power: 20 kva.... |
|
|
 |
Brand: Delbras
- No Break.
- Brand: Delbras.
- Model: PHD.
- Power: 06 KVA.
- 220 V input.
- Output 110 V + 110 V.
- Frequency 60 Hz.... |
|
|
 |
Brand: Vesper
- Explosion resistant axial fan hood.
- Brand: Vesper.
- Model: PE 400 T4.
- With explosion-proof motor, WEG Cepel Inmetro certificate.
Click here to downlo... |
|
|
 |
Brand: Hebleimar
Hebleimar stainless steel knife / knife roller
- Brand: Hebleimar
- Material: Stainless steel
- Voltage: 220 V three-phase
- Components: 1 engine generating 7.2 KW of power
- General characteristics: Spacing between 30 mm rotary knives... |
|
|
 |
Brand: Berliner Luft
- Exhaust fan, ventilation unit with double exhaust fan.
- Brand: Berliner Luft.
- Series: BBT.
- Model: BBT 160.
- Quantity: One unit.
- Excellent condition.
Cli... |
|
|
 |
Brand: Implantaçăo Engmaq
Stainless steel tank with serpentine.
Brand: Implantation Engmaq.
Capacity: 35 liters.
Area: 0,30 m2.
Pressure Design: Side / Serpentine - 3/5 Bar / man.
Design temperature: Side / Serpentine - 80/80 C.
Operating pressure: Side / Se... |
|
|
 |
Brand: Hebleimar
Extruder for cereal dough, sweets and consistent product.
- Brand: Hebleimar;
- Model: HEX - 400.
- Material: Stainless steel.
- Voltage: 220 V Three-phase.
- Components: 1 engine of 3.7 KW of power.
- General characteristics: It ha... |
|
|
 |
Brand: Hebleimar
Automatic horizontal knife guillotine
Components: 02 motors generating 1.5 KW of power;
General characteristics: It has cutting adjustment of 80 to 100 mm.
It is part of an industrial line for the manufacture of cereal bars.... |
|
|
 |
Brand: Bray Controls, Flow Tec
- Flow control system.
- Double acting pneumatic actuator.
- Brand: Bray Controls.
- Maximum pressure: 140 psi.
- ISO 5211/1 compliance.
- Valve with ball ring.
- Brand: Flow Tec.
- Model: Flow-Tek F-15 4 "CF8M.
- Stainless st... |
|
|
 |
Brand: Polienva Movitron
- Pneumatic dosing machine.
- Stainless steel.
- Brand: Polienva Movitron.... |
|
|
 |
Brand: Alfa Laval
Alfa Laval sanitary transfer pump
- Pontecia: 7.5 hp - 3 phases.
- Voltage: 220/380 V.
- A 19.1 / 11.1
- Hz 60
- 3,500 rpm... |
|
|
 |
Brand: SG Bombas
- Water pump.
- Brand: SG Pumps and Equipment LTDA.
- Model: CH - 40.... |
|
|
 |
Cart and system feeder parts for cnc lathes, machining center.
Year 2005.
Model: SDEA 00316265-05.
New sealed in the box without use, despite the year in excellent state of conservation.... |
|
|
 |
Sugar sprayer.
Known as tubolăo, serves to spice products as sugar, salt and spices.
... |
|
|
 |
Brand: Sidmaq
Pusher feeder for shapes Sidmaq.... |
|
|
 |
Brand: Tadall
- Bowling divider for Panetone pasta.
- Brand: Taball, mechanical constructions for bakery Taball.
- Used previously in the manufacture of panetones.... |
|
|
 |
Brand: Manifold
Brand Name: Manifold.
Handling: Globoidal type system (without gap).
Stations: 4 - 6 - 8 - 10 - 12 - 16 - 18 - 24 - 36 - 48.
Moving phase: 90 - 270.
Input shaft: Diameter 32 mm.
Output shaft indexed on both sides: Diameter 35 mm.
Dimension: 240... |
|
|
 |
Brand: Peters
Biscuit/wafer stuffing machine with stainless steel multipliers.
Manufacturer: Peters.... |
|
