|
|
|
| Equipment for batching and pasteurizing draft beer and bottle washer/labeler. |
|
Beer bottling equipment.
Composed of:
- Semi-automatic stainless steel beer keg washer and filler.
Approximate capacity: one keg in approximately 3 minutes.
Features:
· Stainless steel tank with heating element for alkaline solution from 65º to 70º C.
· ¾” stainless steel ball valve for alkaline solution recirculation.
· ¾” stainless steel ball valve for waste disposal.
· Digital thermometer controller.
· Centrifugal pump with stainless steel impeller, 1 HP motor with a capacity of 7,000 l/h for alkaline solution injection and rinsing with water.
· Analog pressure gauge from 0 to 5 kg for pressure indication.
• ¾” stainless steel monobloc valve for beer flow control.
• ¾” stainless steel monobloc valve for CO2 control.
• Ball valve for equalizing CO2 and beer.
• Stainless steel keg valve for filling the keg.
- Stainless steel bottling machine with 3 nozzles for bottles of carbonated beer beverages.
Manufacturer | Brand: MEC BIER.
For 350 ml | 600 ml bottles.
Features:
• Device for rinsing 12 bottles at a time.
• Stainless steel tank for rinsing solution.
• Stainless steel interconnecting piping for the rinser (1”).
• Electric conveyor belt.
• Electronic panel with PLC that controls pressurization and filling operations.
• Stainless steel ball valve for solution recirculation.
• Microprocessor controller to pulse the pump during washing.
• Centrifugal pump for injecting the rinsing solution.
• Stainless steel ball valve for mains water inlet and disposal.
• Stainless steel inline filter for the rinsing solution.
• 1” stainless steel beer inlet connection.
• Stainless steel ball valve with pneumatic actuator that controls the beer inlet.
• Bottle filler with 3 nozzles.
• Insulated surge tank for beer.
• 3 pneumatic pistons for positioning the filling nozzles.
• Support to position the 3 bottles for filling.
• Solenoid valve for beer flow control.
• Solenoid valve for CO² control.
• Ball valve for controlling CO² and beer output.
• 1 Pneumatic piston to push bottles to the cap sealer.
• Manual cap feeder.
• 1 Pneumatic piston for positioning and cap sealing.
• Structure and base of the pneumatic pistons in stainless steel.
• 1” stainless steel SMS connections.
• 25-foot air compressor.
- Bottle filling machine with 2 nozzles.
Manufacturer | Brand: MMC TEC.
- Stainless steel pasteurizer for beer.
Features:
• Capacity for 550 bottles.
• Stainless steel tank with 4 feet, with lid to protect against possible bottle bursting.
• Rotating upper spray ring for rinsing in stainless steel.
• Control panel.
• 1” stainless steel piping.
• Pasteurization temperature: 60 ºC.
• Heating system via steam.
• Cooling temperature: Ambient.
• Cooling via industrial water.
• Electronic temperature controller.
• Hydraulic pump for hot/cold water recirculation.
- Bottle and can washer/rinser.
Features:
• Device for rinsing 12 bottles at a time.
• Stainless steel tank for the rinsing solution.
• Stainless steel interconnecting piping for the rinser (1”).
- Semi-automatic labeling machine with date coder for cylindrical bottles.
Manufacturer | Brand: MAQMUNDI.
Features:
• Application of label or label and back label in a single cycle.
• Label stop accuracy of approximately 0.5 mm.
• Placement accuracy of approximately 1.5 mm.
• Single-phase 220 Volt power supply.
• With hot stamping date coder. |
Brand:
Maqmundi, Mec bier, MMC TEC
|
|
|
|
|
|
Other similar equipment for research results
:
|
|
 |
Brand: Agilent HP, Anton Paar, Horiba, Hunter Lab, Kyoto Electronics, Leica, Merck, Mettler Toledo, Miele Professional, Millipore, Parker, Reichert, Thermo Fisher Scientific
Headspace Sampler
Manufacturer: Agilent Technologies
Model: G1888
Year: Not specified
Technical Description: Automated static headspace sampling system designed for volatile compound introduction into gas chromatographs. Features a 70-via... |
|
|
 |
Brand: SIG Group
Parts kit for SIG Combibloc bottling equipment.
Manufacturer | Brand: SIG Group.
Available parts:
- Cutting and sealing units.
- Bottling rails and guides.
- Quick-change kits.
- Sold by batch of parts.... |
|
|
 |
Technical consultancy for the purchase and sale of new and used equipment.
For various segments such as: Food, Cosmetics, Pharmaceuticals, Nutraceuticals, Chemicals, Agro, Pets and others.
Main equipment:
- Vertical Filling Machine (Pillow |... |
|
|
 |
Brand: Noah
Automatic stainless steel blister machine for blister packs of tablets and capsules.
Manufacturer | Brand: Noah Equipamentos.
Approximate capacity: up to 10,000 units per hour.
Model: DPB-250.
Equipment not in use.
Year: 2022.... |
|
|
 |
Brand: Startec
Equipment for manufacturing chocolate coatings.
Composed of:
- Molding machine
- Coating machine.
- Cooling tunnel.
- Melting tank.
- Tempering machine.... |
|
|
 |
Brand: Latini
Set of equipment for making lollipops, one for flat lollipops and the other for round lollipops.
- Equipment for making flat lollipops, consisting of:
Stamp, stick insertion and packaging machine.
Manufacturer | brand: Latini (imported).
... |
|
|
 |
Equipment for manufacturing hard candy.
Composed of:
- Drawing machine.
- Cutter.
- Tubular cooler.
- Rod maker.
- Rod spinner, among others.... |
|
|
 |
Consulting/technical machines and equipment.
Industrial automation, improvements in mechanical equipment, to improve processes in the production, manufacture of devices (mechanical, electrical, tires, etc).
Work on construction of cutting tools, ... |
|
|
 |
Machinery and equipment technician.
Operates more than 40 years in the areas of sanitizing and cosmetics:
-22 years at Unilever, working in the bar soaps fabrications as production coordinator.
-5 years in Amparo (YPE), in bar soaps fabrication... |
|
|
 |
Brand: Tetra Pak
Replacement parts for Tetra Pak process equipment.
Available parts:
- Assorted parts for pumps, valves, heat exchangers, creamers, homogenizers, etc.
- Seals and rings for UHT systems and pasteurizers.
- Sold by batch of parts.... |
|
|
 |
Brand: Tetra Pak
Spare parts set for Tetra Pak filling equipment.
Available:
- Maintenance kits.
- Sealing assemblies.
- Sensors.
- Hoses.
- Assorted parts according to part number.
- Sold by batch of parts.... |
|
|
 |
Brand: Bausch
Rotary filling machine with sealer and depyrogenation and sterilization tunnel for injectable glass ampoules in 316L stainless steel.
Comprises:
- Automatic rotary filling machine and sealer for glass ampoules for human injection lines.
Manu... |
|
|
 |
Brand: Bausch
Stainless steel depyrogenation and sterilization tunnel for glass ampoules.
Manufacturer | Brand: Bausch.
Equipment has CFR 21 PART 11.
The depyrogenation machine has three main zones: preheating, depyrogenation, and cooling.
The preheati... |
|
|
 |
Brand: Bausch
Automatic rotary filling and sealing machine for glass ampoules for human injection lines.
Manufacturer | Brand: Bausch.
Model: 506.
Year: 2022.
Nominal production capacity: up to 24,000 items per hour, depending on the ampoule size.
E... |
|
|
 |
Brand: Fabrima, IWK, IWKA, Masipack
Components: GUK, Siemens
Continuous vertical VP cartoner for blisters, vials, sachets, tubes, chocolates, soap, and more.
Manufacturer | Brand: Fabrima.
Model: Vertopac VP - 120 | Vertopack
Year: 2009.
Voltage: 220 V.
Cartoner for products with package inserts... |
|
|
 |
Brand: Paludo
Vertical strip packaging machine for tablets and capsules.
Manufacturer brand: Paludo.
Model: MP 6.
Single owner equipment.
It comes with a vibrating pan, tooling for tablets, ratchets, gears and other accessories in the photos.... |
|
|
 |
Brand: MH Equipamentos
Sigma dough mixer coated in stainless steel with two arms.
Manufacturer / Brand: MH Equipamentos.
Model: MH-600 Z.
Estimated total volume of the tank: 1,000 L (height x width x depth calculated considering the volume of a square).
Equipme... |
|
|
 |
Brand: Fabrima, IWK, IWKA, Oystar
Continuous cartridge horizontal.
Brand: Fabrima, Oyster and IWK.
Model: CPR C.P.R Cartopac.
With automatic feeding drawer system.
Equipment can be made available for rigid or flexible products.
With or without accessories such as a col... |
|
|
 |
Brand: Ima, Zanasi
Rotary screwing machine for bottle and jar caps.
Brand: Zanasi.
With 6 mechanical threading arms.
New electronic panel.
Design improvements.
Retrofit equipment.
Approximate dimensions:
Height: 1800 mm.
Width: 800 mm.
Length... |
|
|
 |
Brand: Triclover
Components: WEG
In-line tri-blender mixer for solids and liquids/pastes, made of 316 stainless steel.
Manufacturer: under review.
Motor: 30 hp.
Equipment with new first-line NSK bearings and SABO seal.
Motor manufacturer: WEG model W22 plus.
Power: 15... |
|
|
 |
Brand: Fabbe, Fabbe Pimar
Distiller extractor concentrator with heating jacket and condensation system for extracting vitamins, solvents, flavors, and other products.
Equipment made of stainless steel for product contact parts, body/reactor support made of painted carbon s... |
|
|
 |
Brand: P.E. LATINA LABELLERS, Pe Latina Labers
Labeling machine for cylindrical bottles and self-adhesive film reels.
Automatic labeling machine.
Manufacturer: P.E. Latina Labelers.
Model: Essencial C-W-40 CW40 C/W/40.
Year of manufacture: late 2012.
Single-owner equipment. It was ... |
|
|
 |
Brand: Nelpas
Volumetric rotary piston filler for filling small bottles.
Manufacturer: Nelpas.
Piston volume: 100 ml.
Minimum capacity: 30 ml (to be confirmed).
Automatic filling equipment with 4 mechanically driven dosing pistons.
Pneumatic automat... |
|
|
 |
Brand: Quimis
Climate chamber for stability testing with temperature and humidity control.
Manufacturer: Quimis.
Equipment was in operation in a human pharmaceutical industry; check the validation/calibration tag.
Equipped with a data printer.... |
|
|
 |
Brand: Phoenix Luferco
Components: ABB, Danfoss, Ksb, Omel
Horizontal autoclave with steam generator and vacuum pump.
Manufacturer: Phoenix Luferco.
Capacity: 360 L.
Model: 39206.
Year of manufacture: August 2019.
The equipment was in operation in the pharmaceutical industry for human use, wit... |
Others suggested equipment for you:
|
|
 |
Stainless steel tank.
1000 litre capacity.
With motor and reducer.... |
|
|
 |
Brand: Dmom
Filling line for dairy dulce de leche and pasty products.
Filling machine, sealing and dater in linear tri-block system.
For cups pots jars.
Brand: Dmom.
Model: DMS 500 SA.
Voltage: 220 W.
With lung tank with tacho agitator.
Capa... |
|
|
 |
Brand: Omega Ice
Pump to incorporate fruit, pulp, or other products into ice cream or processes.
Product dosing pump.
Brand: Omega Ice.
Model: Mix Pump.
With lung tank.
Frequency inverter for mixing in the tank and frequency inverter in the pump.... |
|
|
 |
Brand: Polienva Movitron
- Pneumatic dosing machine.
- Stainless steel.
- Brand: Polienva Movitron.... |
|
|
 |
Stainless steel tank with simple shirt with lid without agitator.
Capacity: 1,000 liters.
Measures:
diameter: 1000 mm.
height: 1300 mm.
overall height: 1900 mm.... |
|
|
 |
Brand: Imacal, Wada
Rotary filling with 12 automatic nozzles.
Brand: Wada, Imacal.
Model: Mr 12.
Double conveyor belt.
In stainless steel.
... |
|
|
 |
Brand: Tecmaes
Labeling labeling machine for flexible packaging.
Brand: Tecmaes.
For 10 mm to 115 mm labels.
Production: 30 meters per minute.
Application accuracy: Variation of 1 mm more or less.
Apply label and counter to boxes and flat products.... |
|
|
 |
Brand: Nocelli
- Lineariser with 6 nozzles.
- Machine built in stainless steel.
- Structure in good condition.
- Brand: Nocelli.... |
|
|
 |
Brand: Meca
Saches sealer
electronic welding machine (radio frequency)-semi automatic box
Manufacturer: Mecca.
Saddle sachets in PVC for honey, sweet milk, olive oil and what most imagine.
1-equipment application.
electronic welding machines sachet, ... |
|
|
 |
Brand: Martinez taboada
Filling machine for vials and flasks with stopper.
Brand: Martinez Taboada.
Model type: Ife 77.
Makes up to 30 ml.
Year: 1979.... |
|
|
 |
Brand: Glória
Soda machine.
The equipment in question is used, as is.
Brand of equipment: Glory
production Details:
production: 200 packs per hour.
Number of employees: from 06 to 08 people.
Infrastructure: mt 10 x 20 Mt.
equipment details:
1 Fi... |
|
|
 |
Tank insulated with refrigeration, internal in stainless steel and external in carbon steel.
Capacity of 1,300 liters.... |
|
|
 |
Brand: Imarvil
Stainless steel washer bottles, use to sterilize the product packing container to be filled.
the liquid used to wash is alcohol.
Brand: Imarvil... |
|
|
 |
Stainless steel tank with internal cooling like tina.
220 litres capacity.... |
|
|
 |
Brand: Donar, MVL
Components: WEG
With vibrating chute feeder for solid products.
Presence sensor for container packaging, moved by conveyor belt with talisca.
The equipment has two stainless steel silos, each silo has a scale/load cell and a CLP itself.
CLP brand GTA.
... |
|
|
 |
Brand: Km Máquinas
Semi-automatic, benchtop, electro-pneumatic stainless steel capping machine.
Manufacturer | Brand: Km Máquinas.
Model: BA002.
Semi-automatic equipment, allows pressure adjustment, has a parts counter, and a height-adjustable column.
Power... |
|
|
 |
Brand: Edward
Linear filling 6 stainless steel nozzles for:
Pasty and Liquid oils.
Filling machine can fill gel alcohol
2000 bottles Capacity/hour with 6 600 ml volumetric cylinder.
Pneumatic reservoir for 50 liters in stainless steel Mark Edwards.
... |
|
|
 |
Brand: Ima, Tecmar
Components: Adam, Allen-Bradley, Emerson, Gaynor, Lineartec, Schneider, WEG
Sachet with 12 ways.
Stick sachet filling machine.
Manufacturer brand: Tecmar IMA group.
Production: 50 g.p.m* (*these values vary according to the density and granulometry of the product, production may drop).
Hours of use and strokes: C... |
|
|
 |
Brand: Implantação Engmaq
Stainless steel tank with serpentine.
Brand: Implantation Engmaq.
Capacity: 35 liters.
Area: 0,30 m2.
Pressure Design: Side / Serpentine - 3/5 Bar / man.
Design temperature: Side / Serpentine - 80/80 C.
Operating pressure: Side / Se... |
|
|
 |
Brand: Alfa Laval
Alfa Laval sanitary transfer pump
- Pontecia: 7.5 hp - 3 phases.
- Voltage: 220/380 V.
- A 19.1 / 11.1
- Hz 60
- 3,500 rpm... |
|
|
 |
Brand: Nocelli, Serac
Gravity packer for liquids.
- Machine has 1 spout.
- Machine entirely built in stainless steel.
- Brand Serac.... |
|
|
 |
Stainless steel storage tank.
500 liters capacity.
With carbon steel support.
Output of the product from the side.
With motor and propeller shaft.... |
|
|
 |
Brand: Nocelli, Serac
- Lineariser with 6 nozzles.
- Machine built in stainless steel.
- Structure in good condition.... |
|
|
 |
Brand: Metroval
Demineralized water volumetric presetting device all in stainless steel.
Mark Metroval.
Originally from pharmaceutical industry.... |
|
|
 |
Brand: Paludo
Packing machine pills.
Brand: Paludo.
Modelo: MPE strip.... |
|
