|
|
|
| Hammer Mill Vieira 5 CV |
|
Hammer mill in 1020 carbon steel with white epoxy paint.
Manufacturer: Vieira.
Model: MCS 280.
Power: 5 hp.
For grinding grains, cereals and spices, as well as grinding pre-mix formulations and reprocess grinding.
Approximate capacity: 30 kg per hour in micronized grinding.
With 0.3 mm sieve (conical hole).
Continuous suction feeding.
Approximate dimensions:
Mill:
Height: 1.00 m.
Width: 650 mm.
Length: 900 mm.
Grinding Compartment Diameter: 300 mm.
Supply Hopper:
Height: 900 mm.
Width: 550 mm.
Length: 650 mm.
Hurricane:
Adjustable height approximately: 2.50 m.
Diameter: 600 mm.
Length: 850 mm. |
Brand:
Vieira
|
|
|
|
|
|
Photos and images sent by email will be considered as ad authorization on our websites and marketing.
Camargo Industrial has no responsability for the data delivered by the advertiser, (Operation, technical, maintenance, warranties, technical delivery) and registration of the same data, exempting Camargo Industrial responsibilities on the veracity of the information described, civil and criminally.
The advertiser declares that the equipment is their property, settled without alienation, pending fiscal or judicial attachment.
Standard Work Safety of Machines and Equipment (NR12): 12.1.1. Camargo Industrial does not participate in the use phase construction, transport, assembly, installation, adjustment, operation, cleaning, maintenance, inspection, decommissioning and dismantling of machinery or equipment, any such liability of the seller attributes and / or buyer, relieving - any responsibility Camargo Industrial.
Others suggested equipment for you:
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
Refining mill with 3 cylinders, 600 mm wide.
Brand: G.Mazzoni.
With equipment control panel.
Approximate dimensions:
Length: 720 mm Useful: 600 mm.
Diameter: 250 mm.
Engine: 20 HP.... |
|
|
 |
Brand: Manesty
Oscillating Granulator.
Brand: Manesty.... |
|
|
 |
Brand: Hardinge
Ball mill.
Brand Name: Hardinge.
Type: Biconical.
Model: Model 96.
Reducer and motor with 150 CV plus clamp pump.
Grinding capacity depends on the hardness of the material, example, limestone 7 tons hour.
... |
|
|
 |
Brand: PILON
05 roller mills (450 mm) mark pilon
01 600 mm roller mill brand and ROUSSELE. * k12k. * The equipment is fully operational.
... |
|
|
 |
Continuous ball mill.
1st MILL 3,000 X 1,800 m m.
2nd MILL 2.600 X 2.000 m m.... |
|
|
 |
Components: Siemens
Industry and to make wheat for Kibe and she just had a little more than a year of use after was deactivated this a little dirty so she still mounted on the same place your brand Dandréia fabrica de Limeira-SP
production and to 200toneledas month.
... |
|
|
 |
Brand: Meteor
Sugar mill.... |
|
|
 |
Mill for peanut butter cups.
Single-phase motor.
Mouth of 81 mm in stainless steel.... |
|
|
 |
Brand: Metra
Ball homogenizer mill / refiner for creams, chocolates and sweets.
Brand name: Metra.
model: BE-MILL A / f.
capacity: 350 litres.
With vertical motor m / 35 KW ABB to trigger internal axis.
Hot water system.
Lateral resistance ... |
|
|
 |
Brand: Netzsch
Universal mill.
Stainless steel.
Brand: Netzsch.
With silo and vibrating chute and 3 CV motor.
Developed for the production of hazelnut paste.... |
|
|
 |
Brand: Braibanti
Complete line for the production of spaghetti noodles.
Brand: Braibanti.
Length of approximately 30 metres.
With 2,500 trafilas.
Endless thread mill.
Ability to tie 800 Kg/h.... |
|
|
 |
Brand: Meteor
Stone mill.
Brand: Meteor.
Model: H3 30 CV.
Capacity up to 500 liters per hour.... |
|
|
 |
Brand: Hebleimar
Equipment for crushing the scrap of biscuits, biscuits and similar products.
Brand: Hebleimar.... |
|
|
 |
Ball mill
internal Measure 3.5 m diameter x 6 mt length
external Measure 3.5 mt x 7.5 mt.
Two access doors;
Two inspection ports;
complete and reinforced Bearings
lateral reinforcements approximate weight of 21 ton
steel smooth inter... |
|
|
 |
Brand: Tigre
Hammer mill Tiger brand, without motor model EC-12... |
|
|
 |
Components: WEG
Ball mill
State of equipment: used/reviewed
origin: Blowtex
model:
double sized process in which was used: ultra-fine grinding of latex
capacity: 2 Paul c/27 Lts
nominal dimensions: 1600 mm Prof./550 mm alt/500 mm larg
weight: ball Mill... |
|
|
 |
Brand: Imapi
800 mm mill with 40 Hp engine,
1 Imapi brand Granulator saseg brand with motor 2 Hp... |
|
|
 |
Sugar mill.... |
|
|
 |
Brand: Netzsch
Ball mill/Refiner.
Mark Netzch.
With 300 mm diameter x length of 700 mm.
production capacity estimated between 100 to 150 kg per hour to between 25 and 30 microns Refining.
External cylinder in stainless steel, carbon steel flange and screw i... |
|
|
 |
Brand: Terpan
Peanut mill Terpan brand
0.72 Measures width x length x height 1.43 0.51... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Photos and images sent by email will be considered as ad authorization on our websites and marketing.
Camargo Industrial has no responsability for the data delivered by the advertiser, (Operation, technical, maintenance, warranties, technical delivery) and registration of the same data, exempting Camargo Industrial responsibilities on the veracity of the information described, civil and criminally.
The advertiser declares that the equipment is their property, settled without alienation, pending fiscal or judicial attachment.
Standard Work Safety of Machines and Equipment (NR12): 12.1.1. Camargo Industrial does not participate in the use phase construction, transport, assembly, installation, adjustment, operation, cleaning, maintenance, inspection, decommissioning and dismantling of machinery or equipment, any such liability of the seller attributes and / or buyer, relieving - any responsibility Camargo Industrial.
|
 |
| |
|
Hammer Mill Vieira 5 CV
