|
|
Duplex extruder G.Mazzoni |
- Vacuum duplex extruder with two chambers and G. Mazzoni heated head.
- Maximum approximate capacity of 1000 kg / hour (1,000 soaps / hour of 90 grams In constant activity).
- With two stages, vacuum chamber, the bottom part is compacted and works with Bank of ice water to 10 degrees positive.
- Head with heating.
- With thread of 300 mm of diameter and mouth of 100 mm.
- Homogenizes and extrudes the dough. |
Brand:
G.Mazzoni, Mazzoni, Mazzoni LB
|
|
Main applications:
Manufacture of soap / soap
|
|
Photos and images sent by email will be considered as ad authorization on our websites and marketing. Camargo Industrial has no responsability for the data delivered by the advertiser, (Operation, technical, maintenance, warranties, technical delivery) and registration of the same data, exempting Camargo Industrial responsibilities on the veracity of the information described, civil and criminally. The advertiser declares that the equipment is their property, settled without alienation, pending fiscal or judicial attachment. Standard Work Safety of Machines and Equipment (NR12): 12.1.1. Camargo Industrial does not participate in the use phase construction, transport, assembly, installation, adjustment, operation, cleaning, maintenance, inspection, decommissioning and dismantling of machinery or equipment, any such liability of the seller attributes and / or buyer, relieving - any responsibility Camargo Industrial.
Others suggested equipment for you:
|
|
|
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
Sigma G.Mazzoni stainless steel mixer.
With control panel and automatic extrusion.
Reinforced walls.
Production 175 kg of base mass, was used to mix soaps masses, due to its strength, the equipment is reinforced, including against high quali... |
|
|
|
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio). -capacity 160 units/minute. -press Control Board. -Motor and reducer. -Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
|
Stainless steel tank. 150 litre capacity. no motor.... |
|
|
|
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
G.Mazzoni soap extruder intermediary.
- To extrude soap and preliminarily homogenize the dough.
- With 300 mm thread and cutting system.
- Measure 2,10 in length x 1,30 in width.... |
|
|
|
The machine is part of a line for production of SOAP g. Mazzoni.
Mat set:
1.80 m mat press input.
2.00 m mat press output.
8.00 m mat cutter output.
7.50 m mat return refining extruder.
Note: Uses for transportation of product... |
|
|
|
Brand: Tirelli
Linear filling with 4 nozzles.
Brand: Tirelli.
Model: GVJA.
Machine to work on speed.
Imported equipment, great condition, has little time before their date of manufacture.
Sell the Tirelli labeller who was from the line (fillin... |
|
|
|
Brand: Tirelli
Imported Italian bottling line, threading and labelling, consisting of:
-stainless steel pneumatic linear Tirelli Filling with 4 nozzles. Model: GVJA.
-Rosqueadora stainless steel bottles, flasks for pneumatic Tirelli. Model: NEBEL 2 t.... |
|
|
|
Stainless steel tank with mixer ... 2400 litres capacity.... |
|
|
|
Brand: Battenfeld Pugliese
Components: Cestari
Battenfeld Blower Pugliese. Function: production of bottles. Used for: manufacture of detergent bottles.
Model: BPS-2.
Year of manufacture: 1996. Capacity: 1,000 bottles per hour. Voltage: 220 Vac/60 hz/135. With 3 cavities moul... |
|
|
|
Brand: Promaler
Intermittent rotary cellofanching machine.
Brand: Promaler.
Prepared to operate fully closed cartridges.
Tape application with the following dimensions: 36 mm wide x 15 mm deep x 67 mm high.
Machine can be formatted for cigarettes, haysta... |
|
|
|
Brand: IMSB, Rodopac
Automatic Capper with 6 nozzles. Manufacturer: IMSB. Model: TSB 25.06 6 Nozzles. Measures 40 mm: 1.50 mm x 1.20 mm x 2.30 mm height. Bondone and thread plastic bottles of 850 ml. Capacity of 150 bottles per minute. Weight 1,100 kg.
... |
|
|
|
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
2 Caterpillar brand SOAP cutter g. Mazzoni.... |
|
|
|
Stainless steel tank with internal cooling like tina. 220 litres capacity.... |
|
|
|
Conveyor screw Stainless steel
- 5 meters long. Measures:
- Diameter: 200 mm.
- Space between fins: 120 mm.
- Shaft diameter: 100 mm.
- Engine: 7.5 hp 1715 rpm.
- With motor and reducer.... |
|
|
|
Brand: Martinez taboada
Rinsers of flasks.
Brand: Martinez Taboada.
Makes up to 30 ml.
type Model. IFE 77.
Year. 1979.... |
|
|
|
Brand: Imarvil
Stainless steel washer bottles, use to sterilize the product packing container to be filled. the liquid used to wash is alcohol.
Brand: Imarvil... |
|
|
|
Stainless steel storage tank.
500 liters capacity.
With carbon steel support.
Output of the product from the side.
With motor and propeller shaft.... |
|
|
|
Brand: KHS
Components: Allen-Bradley
Flow Pack Packaging.
Brand: KHS
model: Pack y.
the machine was formatted for packing SOAP, before the format and size of the product is cradled 120 units/minute.
Features PLC Allen Bradley.
Simple mordent.
Part that comes in c... |
|
|
|
Brand: Prodismaq
- Packing machine for special products.
- Complete equipment built in stainless steel.
- It has 10 dispensing nozzles.
- The equipment was built as a special design, to pack flexible products that need support for conveyor belt, such as seru... |
|
|
|
Stainless steel mixer.... |
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
|
Photos and images sent by email will be considered as ad authorization on our websites and marketing. Camargo Industrial has no responsability for the data delivered by the advertiser, (Operation, technical, maintenance, warranties, technical delivery) and registration of the same data, exempting Camargo Industrial responsibilities on the veracity of the information described, civil and criminally. The advertiser declares that the equipment is their property, settled without alienation, pending fiscal or judicial attachment. Standard Work Safety of Machines and Equipment (NR12): 12.1.1. Camargo Industrial does not participate in the use phase construction, transport, assembly, installation, adjustment, operation, cleaning, maintenance, inspection, decommissioning and dismantling of machinery or equipment, any such liability of the seller attributes and / or buyer, relieving - any responsibility Camargo Industrial. |
|
|
|